ricoo TRH-01 Thin Client Computer Holder Instruction Manual
- June 12, 2024
- ricoo
Table of Contents
ricoo TRH-01 Thin Client Computer Holder
Scope of delivery
The numbering on the plastic bag may differ/missing completely!
INSTRUCTION
Please note: Images in these assembly instructions are only technical presentations of the product. Actual product design may vary minimally. Do not begin the installation until you have read and understood all the instructions and warnings contained in this installation sheet. If you have any questions regarding any of the instructions or warnings, please contact your local distributor. This product was designed to be installed and used ONLY as specified in this manual. Improper installation of this product may cause damage or serious injury. This product may only be assembled/installed by the technical staff. Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components. Always use an assistant or mechanical lifting equipment to safely lift and position the equipment. Make sure that before and after the installation of the product neither you nor somebody else can be injured and other objects can be damaged. In case of doubt request for help from an expert. This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury. Tighten screws firmly, but do not over tighten. Over tightening can cause damage the items, this greatly reduces their holding power.
ASSEMBLY
E.N.Z. Engineering GmbH
Salzmatten 6
79341 Kenzingen
(Germany)
E-Mail: support@ricoo.de
www.ricoo.eu
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>