PINEGREEN LIGHTING CL-SML2ST 1000 Lumen Dual Head Solar Motion Activated Security Light Instruction Manual

: June 9, 2024
: PINEGREEN LIGHTING

Table of Contents

CL-SML2ST 1000 Lumen Dual Head Solar Motion Activated Security Light
PRE-INSTALLATION
CARE & MAINTENANCE
RECOMMENDED INSTALL HEIGHT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

USER MANUAL CL SML2ST 1000
LUMEN DUAL HEAD SOLAR MOTION ACTIVATED SECURITY LIGHT
Instruction Manual

CL-SML2ST 1000 Lumen Dual Head Solar Motion Activated Security Light

WARNING:

Your motion light is not a toy. Keep it out of reach from small children.
Your motion light must be installed outdoors. Direct sunlight is needed for light to operate properly.
If using a step ladder, you may require a second person to help install the solar motion light.
Prior to installation, lay out all components and check against the part list section in this manual.
Never look directly into the solar motion light when illuminated.
This product is designed for outdoor use.

PRE-INSTALLATION

Before assembly compare package contents with list to make sure all parts are present.
Select suitable location that can support the weight of the fixture. Determine mounting method (page 2).

HARDWARE
Before beginning installation of the product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 15 minutes per light. Please read these instructions thoroughly prior to installation, then store in a safe place for future reference.
BATTERY REPLACEMENT INSTRUCTIONS
When replacing the battery, be sure to:

Use rechargeable battery only. Battery specification is Li-ion 3.7V 1800 mAh, 1pc is required.
Match the replacement battery specifications with the battery that have been removed.
Observe the correct polarity (+ and -) when installing the replacement battery.
IMPORTANT: Dispose of the Lithium ion battery in accordance with local, state and federal regulations.

CARE & MAINTENANCE

The solar motion light should be cleaned with a damp cotton cloth on a regular basis. This will ensure optimal performance and battery charging.
Never let any abrasive material come into contact with the light.
Your fixture is made from quality materials that will last many years with minimal care.

INSTALLATION-1 ——– NOTE: Recommended
Tools: Power Drill, Phillips Screwdriver

Use a power drill (not included). Drill two 1/4 holes on the chosen surface. Fasten the motion light onto the wall with 2 wall plugs & 2 screws.
Installation is complete.

IMPORTANT TIP:
Ensure your motion light is placed where it is exposed to direct sunlight.
Be aware of objects such as trees or property overhangs that may impede the panel’s ability to generate a charge.

RECOMMENDED INSTALL HEIGHT

8-10 feet above the ground.
At such a height, the motion sensor will provide detection distance of up to 40’.
The motion sensor is the most sensitive as a person or object moves parallel to the sensor head.
The motion sensor is the least sensitive if a person or object moves directly at the sensor head.

PLEASE NOTE ———-

The maximum detection distance is 40’.
Do not mount the fixture near a heat source like an air conditioner, vent or furnace exhaust, or in a direction facing and reflective object or nearby light source.
The light will illuminate for 20 seconds when motion is detected.

EYES:

DO NOT look directly at the LED lights.
DO NOT remove the LED lights protective covering.

This product has a two-year warranty from the date of purchase. This guarantees against failure due to factory defects, whether caused by materials or workmanship.
The warranty is non-transferable and only pertains to the original purchaser. Proof of purchase is required for any repair or replacement, so please keep your proof of purchase receipt.
This warranty does not cover normal wear and tear or damage due to misuse. Misuse of this product includes but is not limited to: