PINEGREEN LIGHTING CL-4SL5KLST-2PK 42 Inch 5000 Lumen Led Linkable Shop Light User Manual
- June 8, 2024
- PINEGREEN LIGHTING
Table of Contents
PINEGREEN LIGHTING CL-4SL5KLST-2PK 42 Inch 5000 Lumen Led Linkable Shop
Light
CARE FOR YOUR PRODUCT
Your product will last for many years with minimum care. Therefore, it is essential to clean the product periodically. Use a soft, non-abrasive cloth or a mild, non-abrasive glass cleaner. It is essential NOT to use any solvents or harsh cleaning agents. When cleaning, make sure the power is OFF. Do not spray liquid directly onto the product or wiring. Instead, spray or pour a small amount into the cloth and clean the product.
TROUBLESHOOTING
| Problem | Possible Cause | Solution |
|---|---|---|
| The product does not turn on | The power is off | Check the power supply and |
make sure it is ON
There is a bad wire connection| Check the wiring
The switch is defective| Test and/or replace the switch
Flickering| The light is not operating correctly| Disconnect and call the
manufacturer
EYES:
- DO NOT look directly at the LED lights.
- DO NOT remove the LED lights protective covering.
CARE FOR YOUR PRODUCT
This product has a two-year warranty from the date of purchase—this guarantees against failure due to factory defects, whether caused by materials or workmanship. The warranty is non-transferable and only pertains to the original purchaser. Proof of purchase is required for any repair or replacement, so please keep your proof of purchase receipt. This warranty does not cover normal wear and tear or damage due to misuse. Misuse of this product includes but is not limited to:
- Using outdoors in extreme weather conditions.
- Opening the product’s housing.
- Any attempts to update, remodel or fix the unit yourself.
42” 5000 LUMEN LED LINKABLE SHOP LIGHT
Lumen| 5000
Watts| 50
CCT| 4000K Bright White
Power Supply| 5ft SPT-2 Plug
WARNING:
YOU SHOULD ALWAYS FOLLOW BASIC PRECAUTIONS.
Read, follow, and understand all instructions and warnings before beginning
any installation of this product. Failure to do so can result in electric
shock, fire, or other injuries, including death. Save this user manual for
instructions and warnings for possible future relocation and installation.
CAUTION:
- This product is not waterproof and is designed for dry use only.
- Avoid environments with extreme dust and/or humidity.
- Avoid areas with temperatures higher than 104 Fahrenheit.
- Avoid using this product near flammable materials and/or gas.
- DO NOT use on radiant-heating type of ceilings.
- Always shut off the main power supply at the circuit breaker before removing or relocating this product from any area.
PRE-INSTALLATION INSTRUCTIONS
Before beginning any installation, select your location. Measure between the
two “S Hook” attachment holes on top of the light to determine the distance
between each hanging chain. Next, determine your mountain method.
If you or a professional electrician is mounting into wood, it is recommended
to use Screw Hooks (C) as in Diagram 1.
If mounting into drywall, it is recommended to use Screw Hooks (C) and Toggle
Bolts (D). Screw the Screw Hook into the Toggle Bolt. Then drill a 1/8” hole
into the drywall. Pinch the butterfly ends flat and push through the drywall
hole. The Toggle Bolt will expand behind the drywall as in Diagram 2. Repeat
for the other side.
It is up to the purchaser or a professional electrician to determine the best area to install. The manufacturer is NOT responsible for improper installations.
HARDWARE INCLUDED
| Part | Description | Quantity |
|---|---|---|
| A | “S” Hook | 2 |
| B | Hanging Chain | 2 |
| C | Power Cord | 1 |
| D | 12” Linking Cord | 1 |
| E | Screw Hook | 2 |
| F | Toggle Bolt | 2 |
| G | End To End Connector | 1 |
PRODUCT INSTALLATION INSTRUCTIONS
- Attached the “S Hook” (A) to the LED light (Diagram A). Repeat this on the other side.
- Attached the “Hanging Chain” (B) to the “S Hook” (A)(Diagram B). Repeat this step on the other side
- Hang the Hanging Chain on the pre-installed “Screw Hook” (E). Adjust to the desired height and guarantee the product is leveled. It is essential to keep the product at a minimum of 3” from the ceiling.
- For this product, you can link up to 6 UNITS. Simply plug the linking cord directly into the adjacent unit(s).
- Plug the main light’s AC power cord into the AC outlet. Pull the chain to power the product ON and again to power the product OFF.
If you have questions or missing parts, please contact our customer care at 1-888-745-4837