PINEGREEN LIGHTING CL-BU-G60 600 Lumen Universal Folding Bulb with Extension Instructions
- June 9, 2024
- PINEGREEN LIGHTING
Table of Contents
CL-BU-G60 600 Lumen Universal Folding Bulb
with Extension
Instructions
WARNING:
RISK OF ELECTRICAL SHOCK.
TO AVOID ELECTRICAL SHOCK, MAKE SURE TO TURN OFF THE MAIN POWER SOURCE OR
DISCONNECT POWER DURING THE INSTALLATION OR SERVICE OF THIS PRODUCT
INSTRUCTIONS: ITEM CL-BU-G60 | 6000 LUMEN UNIVERSAL FOLDING BULB WITH
EXTENSION
WARNING:
You should always follow basic precautions.
Read, follow, and understand all instructions and warnings before beginning
any installation of this product. Failure to do so can result in electric
shock, fire, or other injuries, including death. Save this user manual for
instructions and warnings for possible future relocation and installation.
CAUTION:
– This product is designed for dry/damp use only and is not waterproof. Never
submerge this product in water.
– DO NOT use on radiant heated surfaces.
– DO NOT remove the lens protecting the LED.
– DO NOT open the product. It is NOT possible to change the LED lights or
source.
– DO NOT use near a gas source.
– This product is not intended for use in possible explosive areas. It should
never be in an area of exposure to vapor elements.
– This product is not a toy and should stay out of children’s hands.
– This product is not intended for use with emergency exits.
FEATURES:
| Lumen: | 6000 |
|---|---|
| Watts: | 65 |
| Equivalency: | 350W Incandescent |
| LED Lifespan: | 30,000 Hours |
| Extra: | E26 Extension |
| Operating Voltage: | 120V |
| CRI: | 80 |
| Color Temp (CCT): | 6500K Daylight |
| Base: | E26 / Standard Edison |
| Damp Rated: Operating | Yes |
| Temperature: | 14OF to 104OF |
If you have questions or missing parts, please contact our customer care at 1-888-745-4837
INSTALLATION INSTRUCTIONS:
- Before installing, make sure to shut the power OFF at the circuit breaker. It is highly recommended that a surge protector is installed. If Ballast is present, it must be bypassed.
- Remove the existing bulb by unscrewing it in a counter-clockwise direction.
- In a clockwise direction, screw in the unit. Do not over tighten as this may cause damage to the light and/or the socket. It may be necessary to pivot each light panel down before screwing in the unit.
- Turn the power ON at the circuit breaker.
- Turn the light switch ON. The LEDs will illuminate.
- There are 4 adjustable light panels. Pivot each one to meet the desired light in the area. To protect your eyes, never look directly into the LED lights even when adjusting the panels.
EYES:
- DO NOT look directly at the LED lights.
- DO NOT remove the LED lights protective covering.
CARE FOR YOUR PRODUCT:
This product has a two-year warranty from the date of purchase—this guarantees against failure due to factory defects, whether caused by materials or workmanship. The warranty is non-transferable and only pertains to the original purchaser. Proof of purchase is required for any repair or replacement, so please keep your proof of purchase receipt. This warranty does not cover normal wear and tear or damage due to misuse. Misuse of this product includes but is not limited to:
- Using outdoors in extreme weather conditions.
- Opening the product’s housing.
- Any attempts to update, remodel or fix the unit yourself.