NEXIGO NG17FG 17.3 Inch 144Hz Portable Display User Manual

NEXIGO NG17FG 17.3 Inch 144Hz Portable Display

WELCOME TO THE NEXIGO FAMILY!

Thank you for choosing the NexiGo Portable Monitor! You are now part of an exclusive club: the NexiGo family! It’s our job to make sure you enjoy your membership. If you have any problems, please contact us any time at cs@nexigo.com for further assistance. This product is automatically covered by our industry-leading one-year manufacturer’s warranty. Make sure to register your purchase at nexigo.com/warranty within 14 days of the delivery date, and we will extend your warranty coverage another year, for a total of two years!
From all of us here at NexiGo, we want to thank you for your trust in us. We look forward to serving you again in the near future.
Yours Sincerely,
The NexiGo Team

CONTACT INFORMATION

Website: www.nexigo.com
Manufacturer: Nexight INC
Address: 11075 SW 11th St, Beaverton, OR 97005, US
Tel: +1(458) 215-6088
Email: cs@nexigo.com

SHAPE AND INTERFACE DISTRIBUTION

WHAT’S IN THE BOX

Note: The package only includes a standard wall charger that matches the specific site where you order this item from. For example, a standard EU wall charger will be included if you purchase the item from an EU site.

WALL CHARGER USING GUIDE

For US and EU wall chargers, please use the wall charger directly.
For UK wall chargers, please use the wall charger in conjunction with the included adapter as shown below.

DEVICES CONNECTION INSTRUCTIONS

For maximum brightness and 1080P@144Hz display, please use the provided wall charger to power the display, and make sure the interface of the connected device is full function Type-C/HDMI 2.0/DP 1.2 or above.

1. CONNECT A COMPUTER USING A FULL-FUNCTION USB TYPE-C PORT
   Note: When the device battery drops below 30%, an external power supply is required for the monitor to function. When the device’s battery is above 30%, the device will power the display and automatically activate the energy-saving mode on the monitor. This will set the brightness of the display to low. You may adjust the display brightness and volume as needed on your device .
   The mouse or keyboard is connected to the USB Type-A port to control the screen.
   

2. CONNECT A PHONE USING A FULL-FUNCTION USB TYPE-C PORT
   When connecting the monitor to a Phone using a Type-C cable, you will need to power the monitor first using the provided wall charger.
   

3. CONNECT A COMPUTER USING THE HDMI PORT
   The display is compatible with most HD devices using an HDMI cable. When connecting the monitor to a computer using an HDMI cable, you will need to power the monitor first using the provided wall charger.
   

4. CONNECT OTHER DEVICES USING THE HDMI PORT
   Note: For proper functionality with all devices, please connect the unit to the external power if needed before connecting the data cable.
   

REVERSE CHARGING FUNCTION

You can use the portable display to charge some devices via the full-function USB Type-C port. Simply connect your compatible device to the portable display, and then power the display using the provided wall charger.
Device Compatibility: Mobile Phone, iPad Pro, Laptop with PD protocol
Input Voltage: 5 V~20V
Input Electric Current: 1A~4A

ON-SCREEN DISPLAY (OSD) MENU INTRODUCTION

INSTRUCTIONS

1. Open the OSD Menu by pressing the OSD Menu/Power button
2. Highlight the selected feature by pressing the Volume +/Volume – buttons
3. Open the selected menu section by pressing the OSD Menu/Power button
4. Press and hold the Volume-/Input Source button to back out

REMOTE INTRODUCTION

1. Power Button: Press to turn on/off the portable display
2. Mute Button: Press to mute/unmute the portable display’s speaker
3. OK Button: Press to select or confirm
4. Setting Button: Press to start the OSD menu
5. Return Button: Press to return to the previous menu
6. Source Button: Press to access the input signal menu
7. Image Button: Press to flip the image vertically
8. Left Button: Press to move left or decrease the speaker’s volume
9. Right Button: Press to move right or increase the speaker’s volume
10. Up Button: Press to move up or increase the brightness
11. Down Button: Press to move down or decrease the brightness

Note:

1. Please take out the plastic sheet covering the battery before using the remote.
2. Press down the battery cover by your thumb and rotate it left/right to open/close the battery cover.
3. When you start the OSD menu, the arrow buttons work as left/right/up/down; When the OSD menu does not start, the arrow buttons are used to adjust the volume and brightness.

FAQ

Q1: Does this display require any additional software or drivers?
A: The NexiGo portable display does not require any additional software or drivers to use. Simply plug your device into the display using the USB Type-C or HDMI cable, ensure that the display is properly powered (HDMI connections do not supply power, and USB Type-A connections do not either), and you are good to go!

Q2: Can I use this display with the Playstation, Switch, or Xbox?
A: Yes, this display is compatible with any game console that has an HDMI or USB Type-C output. For all of these systems, you will need to connect the monitor to the HDMI output port on the console, in addition to powering the display with one of the USB Type-C ports.

Q3: How long does the battery last?
A: The NexiGo portable display does not have a built-in battery for additional flexibility when traveling due to FAA regulations concerning batteries. The display instead pulls power directly either from a wall plug, or from the device it is attached to through the USB Type-C connection. As such, it will last as long as your device’s battery lasts. This duration can be extended through the use of a portable charger or an external power supply.

Q4: My laptop or cellphone has a Type-C port but is not on the list of supported devices, will this display still work for me?
A: The NexiGo portable display has a wide range of compatibility, so many devices are compatible we cannot name them all. As such, to figure out if your device would work with this display just determine if the item has a full- featured USB Type-C port or an HDMI port. If it has one of these ports it will work with the display, though it may require an external power source.

Q5: Why does the screen’s image have color defects or seem off?
A: Please inspect any cables that are plugged in to make sure that the pins are straight and not bent. If they are bent, this may cause issues with the display.

Q6: My device is showing up in “Power supply mode” when connecting to the portable display. Is this normal?
A: The monitor only draws a small amount of power from its signal source. This is a normal result and nothing to worry about.

Q7: My screen image bounces or there’s a wave pattern in the image, what should I do?
A: Please ensure that the signal cable is properly connected between the monitor and the output device. If there is no issue with the cable and the display is still having issues, please contact NexiGo support for assistance.

FCC REQUIREMENT

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Get in touch with FREE online services. facebook.com/letsnexigo

Register to get an EXTRA ONE-YEAR warranty. Only valid in registering within 14 days of product delivery. nexigo.com/warranty

References

• NexiGo Warranty Registration | NexiGo
• NexiGo | Home Theater Projectors & Video Collaborations

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>