TESLA 1799799 Wireless Charging Platform User Manual
- June 9, 2024
- Tesla
Table of Contents
Wireless Charging Platform
Setup and User Manual
What’s in the box?
- Charger
- Magnetic Stand
- 65W USB-C Power Supply
Configurations
4. Flat
5. Tilted (with Magnetic Stand)
Cable Management With Stand
Route cable through the stand and out the bottom.
Power On
6. Plug USB-C cable into 65W USB-C power supply
7. Plug power supply into power outlet.
Charge Devices
Place devices flat on Alcantara surface.
Device Not Charging
Devices placed over the aluminum frame will not charge.
LED Status Indicator
LED on bottom side of front edge indicates status.
| Start of Charge | 5 sec illumunation then dim |
|---|---|
| Charging | Constant dim |
Device Removal
Device 1
Multiple Devices| LED off
LED off and then reilluminate
Power Supply Error| Rapid blink
System Error| Rapid 3 blink burst
Metal Object Detected| Slow pulsating blink
*Learn more by reviewing Foreign Objects description in last section
FreePower Wireless Charging
FreePower wireless charging is the technology inside that powers the Tesla
Wireless Charging Platform.
To learn more about FreePower, visit
www.freepower.io
| USB-C PD | Any 15V 3A USB-C PD power supply |
|---|---|
| USB-C Cable Length (in) | No Stand: 60 |
| Product Weight (g) | No Stand: 747 |
| Product Dimensions (mm) | No stand: 220L x 130W x 20H |
117W x 70H
Charge Performance| Wireless charging performance may vary. For best results,
keep charger out of direct sunlight and warm environments, use a thin phone
case or no phone case.
Safety| This product is intended for home and office use only. Prevent cable
from being pinched or damaged. Unplug the product if not used for an extended
period of time. Use in dry locations. Do not place metal objects, or non Qi-
enabled wirless power receiving devices on the charging surface. Do not
disamble the charger.
Foreign Objects| If a metal object is detected between the wireless charger
and a device charging, the object may start to hear up, in order to prevent
this, the charger will stop transmitting power and the LED status indicator
will show a slow pulsating blink. Remove device and ensure there are no metal
objects attached to the device or on the surface on the charger before
resuming normal operation.
Compatibiliy| Qi Certified devices, including smartphones and accessories from
Apple, Samsung, Google, and other manufacturers.
Tesla Logo| Product of Tesla, Inc
1 Tesla Road, Austin, TX 78725
FreePower Logo| Product of Aira, Inc
2048 N 44th St, Phoenix, AZ 85008
Part Number| 1799799
Support Contact| OnlineOrders@Tesla.com
IP Rating| IPX2
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>