HXSJ P9 Keyboard and Mouse Converter Instructions
- June 5, 2024
- HXSJ
Table of Contents
HXSJ P9 Keyboard and Mouse Converter
PRODUCT MANUAL
CONNECTION INSTRUCTIONS
PRODUCT CONNECTION INSTRUCTIONS:
Start the console and connect the adapter via a US8-TYPE C data cable ( USB
port plug to the console, TYPE-C pot plug to the converter) than LED white
light Plug the original wired controller to guide the yellow LED light Insert
the keyboard then LED red light to insert the mouse then LED green light.
After all, connected.the LED will breathe in circulation from
yellow.cyan.purple and pink
N-SWITCH Keyboard and Mouse And headset Connection Diagram
PS4 Keyboard And Mouse Connection Diagram
NOTE: O When using this product on the PS4 console. please note that
The original controller needs to turn o After plugging the cable to connect
the mouse and keyboard converter, the orange light on the If the controller is
on then you need to press the PS button to connect and guide successfully
(Don’t disconnect the controller while using the mouse and keyboard converter,
otherwise it can not be used.)
PS3 Keyboard And Mouse Connection Diagram
NOTE: O When using this product on the PS4 console. please note that
The original controller needs to turn o After plugging the cable to connect
the mouse and keyboard converter, the orange light on the If the controller is
on then you need to press the PS button to connect and guide successfully
(Don’t disconnect the controller while using the mouse and keyboard converter,
otherwise it can not be used.)
Xbox One Keyboard And Mouse Connection Diagram
NOTE: O When using this product on the PS4 console. please note that
The original controller needs to turn o After plugging the cable to connect
the mouse and keyboard converter, the orange light on the If the controller is
on then you need to press the PS button to connect and guide successfully
(Don’t disconnect the controller while using the mouse and keyboard converter,
otherwise it can not be used.)
Xbox 360 Keyboard And Mouse Connection Diagram
NOTE: O When using this keyboard and mouse converter on XBOx 360
console. PLEASE DO NOT disconnect the controller.Otherwise it can’t be used
(The controller should be turnedo before using this product.) An external
device needs to be connected to a power source if the Curent is greater than
650mA
SETTING INSTRUCTIONS
-
Set Keyboard And Mouse Functions
Press the keyboard ESC+ SPACE (space bar) at the same time to enter the function mode of setting the keyboard and mouse buttons (LED blue light) Press and hold the function button you want to set on the original controller, then press the button on the keyboard or mouse you want to set, and release the button on the original controller and the button on the keyboard or mouse. After the setting is completed, press ESC+ SPACE on the keyboard to save the current setting and exit the setting mode. For example: press ESC SPACE (space bar) to enter the setting mode, press and hold the original SWITCH controller A key, and then press the keyboard F key to release the original SWITCH controller A key. The function of the controller A key. -
Note On Keyboard And Mouse Setting Functions During the setting process, if you do not hold down the original controller function key or joystick to the end, the original set function of the keyboard or mouse will be cleared When setting the functions of the original joystick left and right to the keyboard, the direction of the joystick must be pushed to the end, and only the four directions of the joystick up, down, left, and right can be set. For the setting of the mouse, when the original joystick direction must be pushed to the end, the mouse slides in the corresponding direction, and the mouse only supports the corresponding function of the left and right joystick directions. Original controller cross key supports 8 directions setting
-
Mouse Speed Adjustment The product supports mouse movement speed adjustment, the default is the third gear. Shaft speed adjustment: ESC+ CAPSLOCK+A/S/D/F/G
-
Mouse Y Axis Direction Switch The control of the Y axis of some games is opposite to the set value.The game operator can adjust the Y axis direction of the mouse according to his needs by pressing ESC+ R.
-
Function Switching Instructions Enter setting mode: ESC+SPACE Default page 1: SC+ CTRL+Q Exit setting mode: ESC+ SPACE Mouse speed switch: ESC+CAPSLOCK+ A /S/D/F/G Y axis plus reverse: ESC+ R Page area selection: ESC+ TAB+ Q/W/E/R/T Key value restore default: SC+ CTRL+ALT (long press for 3 seconds)
-
Upgrade Instructions (you cannot upgrade at will without the correct upgrade program) On a Windows computer, open the upgrade software. When the converter does not enter the upgrade mode, “Update rmware” is light gray. Connect the converter to the computer through the USB data cable. At this time, the converter’s white LED is on, plug in the keyboard and the red LED is on. Press the keyboard SC+ CTRL+ ALT+ SPACE and hold it for 3s. At this time, the “Update rmware “Is black, click the button Update rmware “to update the converter rmware. The OK window pops up and displays “Update Success”, indicating that the upgrade is complete. Click OK.
The conversion box is connected to the console and not connected to the external devices, and is displayed as a white light. Insert the original controller to guide and display the yellow light, insert the rst device to light red, then insert another device to turn on the green light, successfully turn yellow, and then the color of the breathing light will turn yellow, green, purple and pink (circulation). Each color breathes 4 times to change one color Press the set key function to light up blue.
DEFAULT KEY-VALUE TABLE
-
Keyboard Default Key Value Table
Note: The following keyboard keys refer to the functions on the left and bottom left of the keyboard corresponding to the functions of each platform handle. -
Keyboard Default Key Value Table
PRECAUTIONS
To ensure the normal use of di erent consoles by keyboard and mouse, you must use the original controller (supporting wired functions) corresponding to each platform to guide. The keyboard and mouse interface cannot be connected to the controller. ISupports 95% of keyboards and mice on the market. If you encounter incompatibilities, please provide the actual product to customer service for upgrade.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>