elk HOME H0019-10390 28.5 Inch High 1-Light Table Lamp User Manual
- June 9, 2024
- elk HOME
Table of Contents
H0019-10390 28.5 Inch High 1-Light Table Lamp
User Manual
ANY QUESTIONS CALL:800-613-3261
M-F 8:00AM-6:00PM ET
H0019-10390 28.5 Inch High 1-Light Table Lamp
WARNING:
This fixture is intended for installation in accordance with the National
Electrical Code (NEC) and all local code specifications. If you are not
familiar with code requirements,
installation by a certified electrician is recommended.
CAUTION: To prevent shock, only plug in lamp after lamp assembly is
complete.
WARNING: This portable lamp has a polarized plug (one blade is wider than
the other). As a safety feature, this plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician.
Never use with an extension cord unless plug can be fully inserted. Do not
attempt to work around this safety feature.
Before assembly, remove all parts and part packages from box. If anything is
missing, please contact the retailer from which the product was purchased.
- Squeeze ends of harp (B) inward. Insert each end of harp (B) into each end of saddle (D). Lower harp caps (C) over ends of saddle (D).
- Lower shade (E) down over harp (B). Pass hole in top of shade bracket over threaded stud on top of harp (B).
- Carefully screw finial (F) onto threaded stud on harp (B). Tighten finial (F) to secure shade (E) in place. DO NOT over tighten.
- Insert recommended bulb (not included) into socket (A).
WARNING: Verify correct bulb wattage marked on socket of lamp. DO NOT exceed maximum bulb wattage.