Continental Edison CETG100W Ice Cream Maker Instructions

Continental Edison CETG100W Ice Cream Maker Instructions

IMPORTANT SAFEGUARDS

WARNING: A risk of fire and electrical shock exists in all electrical appliances and may cause personal injury or death. Please follow all safety instructions.
READ ALL INSTRUCTIONS BEFORE USING APPLIANCE.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
  Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

• This appliance is intended to be used in household and similar applications such as

• staff kitchen areas in shops, offices and other working environments;

• farm houses and by clients in hotels, motels and other residential type environments;

• bed and breakfast type environments;

• catering and similar non-retail applications.

• The appliance must not be immersed.

• The appliance is for household use only. Do not use outdoors.

• Children aged from 3 to 8 years are allowed to load and unload refrigerating appliances.

• Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.

• To avoid contamination of food, please respect the following instructions:

  • Opening the door for long periods can cause a significant increase of the temperature in the compartments of the appliance.
  • Clean regularly surfaces that can come in contact with food and accessible drainage systems.
  • If the refrigerating appliance is left empty for long periods, switch off, defrost, clean, dry, and leave the door open to prevent mould developing within the appliance

• WARNING: When positioning the appliance, ensure the supply cord is not trapped or damaged.

• WARNING: Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.

• WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

• WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

• WARNING: Do not damage the refrigerant circuit.

• WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.

• Warning: Risk of fire / flammable materials.

• The refrigerant and insulation blowing gas is flammable, when disposing of the appliance, do so only at an authorized waste disposal center. Do not expose to flame.

• About the ingredients and maximum quantity of mixtures that can be used in the appliance, please refer to the section “RECIPE”.

• About how to clean surfaces in contact with food, please refer to the section “CLEANING AND MAINTENANCE”.

SAFETY PRECAUTIONS

• Before connecting the appliance to the mains supply, please check if the voltage indicated on the appliance corresponds with the main voltage in your home.

•  Ensure the voltage is compliant with the voltage range stated on the rating label, and ensure the earthing of the socket is in good condition.

• Remove all packing material and carefully check your appliance to ensure it is in good condition and that there is no damage to the appliance or power cord and plug.

• Do not touch the plug with wet hands.

• Do not use the appliance if the accessories or parts are not fastened together properly.

• Make sure the appliance is placed on a stable surface when used. Do not upend this product or incline it over a 45℃ angle.

• Do not let the power cord hang over the edge of a table or counter top. Do not let the power cord touch any hot surface.

• Do not use the appliance for other than its intended use as laid out in these instructions.

• Never clean with scouring powders or hard implements.

• Metal sheet or other electric objects are not allowed to be inserted into the appliance to avoid fire and short circuit.

• Before using the appliance for the first time, please wait 2 hours after positioning it, and keep the lid open for at least 2 hours.

• Pure water is not allowed to be used on this unit, spring water is recommended.

• To protect against risk of electric shock, do not pour water on cord, plug and ventilation, immerse the appliance in water or any other liquid.

• Unplug the appliance after using or before cleaning.

• Keep the appliance 8cm from other objects to ensure the good heat releasing.

• Do not use the accessories which are not recommended by manufacturer.

• Do not switch on the power button frequently (ensure 5min. interval at least) to avoid the damage of compressor.

• When taking out the ice cream, do not knock the surface or edge of the container to avoid damage to the container.

• Do not start the power switch when the ice cream container barrel is not installed in place or the mixing fan blade is not placed properly.

• The initial temperature of making ice cream mixture is 25±5℃. The prepared ice cream material cannot be put into the refrigerator for freezing and then put into the machine for making. In this way, the ice cream will solidify ahead of time and the motor will be locked. The motor will be cut off because it enters the protection circuit ahead of time.

• After starting the machine freezing, do not remove the motor and transparent cover during the working process.

• After the operation, please unplug the power plug in time.

• When the indicator light is on, the red light is in standby state.
  When the green light is on, it is in the working state. When the green light is flashing, it is in the heat preservation state.

• When the ice cream machine is started without adding ice cream ingredients, there will be a slight sound of mixing blade scraping to the loading bowl, which is a normal phenomenon.

DESCRIPTION

Structure

Control panel

OPERATION

Connect the power supply and plug the power cord into a suitable socket.

TOUCH CONTROL FUNCTIONS

FUNCTION DESCRIPTION OF TOUCH BUTTONS

1. POWER TOUCH BUTTON
   Plug in the power supply, touch the power button for 1 second to turn on the machine, the indicator light of ice cream mode is on red light, and touch the power button for 1 second again to shut down the machine.

2. START/STOP TOUCH BUTTON
   When the machine is on, the indicator light under one of the three modes selected is in red. If you touch the DÉMARRAGE/ARRÊT button, the indicator light turns green and the device starts modes. If you touch the button again, the machine will stop working and the indicator light will turn red. When the machine is in ice cream mode (mix-refrigeration), at this time, if you touch this button, the indicator light will be on red, the mixing motor of the machine will stop working, and the refrigeration function will stop working after one minute.

3.  MODE TOUCH BUTTON
   When the device is on, you can select thethree modes. Once the mode is launched, you can’t select another mode. You need to stop the current mode beforehand.

DESCRIPTIONS OF MODE

1. Single mixing mode
   When the single mixing mode is selected, the mixing motor starts to realize the mixing function. The default time is 30min. When the time or hardness reaches the set value, 10 beeps to remind that the mixing is completed. After completion, the machine will enter the standby mode, and the indicator light will be on red. Please select other modes or shut down.

2. Single refrigeration mode
   The compressor and cooling fan are started to realize the refrigeration function. The default time is 10min. After completion, 10 beeps to remind that the refrigeration is completed. After completion, the machine will enter the standby state, and the indicator light will be red. Please select other modes or shut down.

3. Ice cream mode
   The compressor, mixing motor and cooling fan are started, when the ice cream is finished, 10 short beeps will sound. At this time, you can enjoy the ice cream. If there is no operation, it will enter into the keep cold function automatically, the indicator light of ice cream mode will turn green and flash, 10 short beeps will sound after the keep cold function is finished. Then the machine will enter into the standby mode and the indicator light will be in red.

DESCRIPTION OF INDICATOR LIGHT

When the machine is in standby state, the red light is flashing;
When the machine is in the working state, it keeps the green light on;
When the machine is in the keep cold state, the indicator light flashes in green.

KEEP COLD FUNCTION

This function keeps the refrigeration to avoid the ice-cream melting in the following cycle: refrigeration for 6 minutes and then stopping for 10 minutes. This cycle lasts for 1 hour. During this period, the green light of ice cream mode is flashing. When the ice cream mode is finished, there are 10 short beeps, and the indicator light turns red, and the device goes to standby mode.

MOTOR SELF-PROTECTION FUNCTION

When the ice cream becomes harder, the mixing motor might be blocked. Then the motor protection device makes the mixing motor stop working by detecting its temperature to ensure the life of the motor.

COMPRESSOR SELF-PROTECTION FUNCTION

When you stop a refrigeration function, if you want to reactivate it afterwards, a 3-minutes period is required before the compressor restarts.

CONTROLLING THE VOLUME OF THE INGREDIENTS

To avoid overflow and waste, please make sure that the ingredients do not exceed 60% of capacity of the removable bowl (Ice cream expands when being formed).

HOW TO MAKE ICE-CREAM

NOTE: Please thoroughly clean all parts that will contact with ice cream before use, including: cooling bowl, loading bowl, mixing fan blade, transparent lid, etc.
Before cleaning, you must ensure that the power cord plug is disconnected from the outlet. When making ice cream, keep the machine flat on a level surface to ensure that the compressor of the machine is working properly.

Here are the steps to make an ice cream:

Step 1.
Pour the well prepared recipe ingredients into the removable bowl, then have a uniform mixing.

Step 2.
Then put the loading bowl into the ice cream machine, both ends of the loading bowl handle shall be aligned with the groove of the upper cover.

Step 3.
Install the transparent lid and motor components.

Step 4.
Install the mixing fan blade, transparent lid and motor components.

Step 5.
Put the components installed in step 4 into the ice cream machine, make sure that the center of the convex hull of the loading bowl and the motor components of the mixing fan blade are in the same straight line, lock the components clockwise, and make sure that the triangle mark on the components rotates to the “LOCK” mark.

Step 6.
Plug in the power supply, touch the power button for 1 second, the machine starts up, the ice cream mode indicator light is red, touch the START/STOP button, the indicator light is green, and start to make ice cream.

Step 7.
When the ice cream is finished, touch the power button for 1 second, and the machine will shut down.

Step 8.
Turn the transparent lid and motor components anticlockwise. In the process of spinning out, there will be a slight friction sound, which is normal. When the triangle mark is aligned with the unlocking mark, take out the components and then take out the loading bowl.

CLEANING AND MAINTENANCE

• Always remove the main plug from the socket before cleaning the appliance.
• Never immerse the appliance into water.
• Do not use chemical or abrasive washing liquids and hard tools to clean the product.
• Do not use dishwasher to clean the loading bowl, and do not use water to directly wash the evaporator.

Caution: The plug must be removed before cleaning to avoid electric shock.

1. Take out the mixing blade, wipe it with a dampened cloth;
2. Take out the removable bowl, clean it with a dampened soft cloth
3. Wipe the transparent lid and refill lid with a dampened cloth;
4. Remove the dirty on the body or other places with a dampened cloth, and do not pour water on cord, plug and ventilation, immerse the appliance in water or any other liquid;
5. Allow drying thoroughly with a dry cloth, then return the component to the home position.

SPECIFICATIONS

Item reference: CETG100W
Model: ICE-1031
Voltage/Frequency: 220-240V~, 50Hz
Wattage: 100W
Refrigerant: R600a (18g)
Protection class: I
Capacity: 1L
Vesicant: Cyclopentane (C5H10)

Manual version: V1

TROUBLE SHOOTING

are water drops between the refrigeration barrel and the loading bowl that are not wiped clean, resulting in freezing| Wait 3-8 minutes before taking out the ice cream bucket.
2| The transparent lid is lifted to the mixing fan blade,
and it cannot be stuck in place| The mixing fan blades not in place, and pay attention to the alignment of the convex hull at the bottom| Put the mixing fan in place and rotate the transparent cover in place
3| The loading bowl cannot be placed in the cold bucket| Deformation caused by improper use of loading bowl| Buy a new loading bowl
4| At the beginning of making ice cream, the mixing fan seriously scratched or jammed.| Deformation caused by improper use of loading bowl| Buy a new loading bowl

CORRECT DISPOSAL OF THIS PRODUCT

ENVIRONMENTAL PROTECTION – DIRECTIVE 2012/19/EU
This appliance carries the symbol for selective sorting, related to the Waste Electrical and Electronic Equipment Directive (WEEE Directive). This means that this appliance has to be handled by a system of selective sorting as required by the European directive 2012/19/EU in order to be either recycled or dismantled, so that impact on environment can be reduced.

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

You can help protect the environment! The packaging material is recyclable.
Dispose of the packaging in an environmentally friendly manner and make it available for the recyclable material collection-service.

This device contains R600a.
Never attempt to open the appliance or pierce the cooling circuit. Any intervention must be performed by a qualified technician.
At the end of the life of the appliance, it must be disposed of in an appropriate place, capable of recycling appliances containing refrigerants.

For more information, you can contact your local or regional administration. Electronic products that have not been selectively sorted are potentially a human health and/or an environment hazard due to the presence of dangerous substances.

Continental Edison
120-126 Quai de Bacalan
CS 11584
33000 Bordeaux

IMPORT BY:
A.M.C.
123, QUAI JULES GUESDE
94400 VITRY SUR SEINE
France

References

• Continental Edison, expert en équipement électroménager et high tech

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>