SINGCALL 567 Wi-Fi Caregiver System User Manual
- June 17, 2024
- SINGCALL
Table of Contents
WIFI Caregiver System
User Manual
Eastway International (HK) Limited
Introduction
WIFI/RF receiver, connected to your phone by Bluetooth and WiFi, can ntegrate all of our RF sensors to TUYA platform, which adopts the advanced wireless access technology, powerful microcomputer control system, large capacity and high-quality voice processing technology, stable and reliable performance, integrated with 32 optional ring tones. The WIFI/RF receiver and the pager can be coded wirelessly.
Arm Mode/Home Mode: Any alarm device will trigger alarm.
Disarm Mode: The alarm device (SOS button not included) will not trigger
alarm.
When you press [ ] to stop the music, at this time the system changes to
Disarm Mode, please set the system to Arm Mode/Home Mode with a short press of
[ ] or operate on the Tuya APP.
Features
- 32 ring tones optional
- 5 adjustable volume (including mute)
- Bluetooth and WIFI wireless connection, controlled by APP remotely
- Alarming from The WIFI/RF receiver and pushing notification to Mobile APP when trigger happens
- Memory function
- Up to 24 accessories can be added
Glass Break Sensor Alarm
Connect with mobile APP
2.1 Download:
Scan the QR code or search for “Tuya Smart” or “Smart Life “in the App Store.
|
---|---
https://smartapp.tuya.com/tuyasmart
|
https://smartapp.tuya.com/smartlife
2.2 Register account:
Users need to register for an account first.
2.3 Network configuration
2.3.1 Turn on Bluetooth and connect your mobile phone to the WIFI. Ensure
the WIFI connected to the mobile phone is 2.4GHz.
2.3.2 Long-press [ ] to enter the WIFI configuration.
The LED white light flashes quickly.
Note: The Mobile and The Wi-Fi/RF receiver have to be with the same WIFI
Network.
2.3.3 Enter [Home] page of Tuya APP and tap on [Add Device] or [ ] . Tap on
[Add] after the device is automatically discovered.
2.3.4 Enter WIFI account and password, then tap on [Next] . Wait for a successful connection and tap on [Done] . The WIFI/RF receiver connected successfully.
3. Add new wireless accessories
-
Click [Accessories] .
-
Click [+] in the upper right corner.
-
Add to accessories.
-
Please trigger the device to be paired.
Duplicate pairing shall be regarded as invalid pairing. -
The device added successfully.
Accessory add
Adding Successfully: Long Press [ ] , then the LED purple light lights on. The
Wi-Fi/RF host beeps TWICE and the LED light flashes TWICE when trigger the
accessory showing the accessory is added successfully.
Modify the accessory properties (name, ringtone, volume)
4.1.1 Click [Accessories] .4.1.2 Click the device. 4.1.3 Click [Sub device name] or [Alarm ringtone] to modify. 4.2.1 Click [Setting]4.2.2 Click [Volume]4.2.3 Modify volume and click [ok]
Delete wireless accessories
- Click [Accessories] .
- Slide to the left.
- Click [Delete] .
- Click [Confirm] .
Delete WIFI/RF receiver
- Click on the upper right corner.
- Click [Remove Device] .
Device name: Check the device or rename the device;
Offline Notification: Turn on and the APP will push notifications when
the device is offline;
Share Device: Share the device with users who need to view the device
status;
Create Group: Device in the same group can be controlled together;
FAQ & Feedback: You can feedback your operating habits and some questions
to us, and we will make some modifications according to your suggestions;
Add to Home Screen: Add the device to the phone home page;
Check Device Network : Check the network signal when the device was last
uploaded;
Device Update: check the firmware version of the device.
Eastway International (HK) Limited
www.singcall.com
Email: sales@singcall.com
FCC declaration of conformity: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.