stalgast 484419V01 Blender Instruction Manual

stalgast 484419V01 Blender

Product Information

The Blender (Model no. 484419V01) has a power rating of 2000 W and operates on a voltage of 230 V with a frequency of 50/60 Hz. It has a maximum capacity of 2 liters and can operate at a maximum speed of 32000 rotations per minute. The blender is equipped with a timer function that allows the user to set a specific time for the blender to operate. The blender also has an automatic thermal protection system that shuts down the device in case of overload protecting it from damage.

Product Usage Instructions

1. Place the blender on a clean, dry, and flat surface before use.
2. Insert the power plug into a socket.
3. Place the jug in the drive socket and ensure that it is securely fixed.
4. Set the TIME dial to the START position (continuous operation, without timer function).
5. Place the lid on the jug.
6. Press the POWER ON/OFF button to start the blender.
7. To stop the blender, press the POWER ON/OFF button again.
8. When using the timer function:
9. Set the desired operating time.
10. Press the POWER ON/OFF button to start the blender.
11. The blender will automatically shut down after the specified operating time has elapsed.
12. When using the PULSE function (available only when the TIME dial is set to 0-5), press and release the POWER ON/OFF button repeatedly to activate the function.
13. While operating the blender, hold the jug by the handle.
14. Do not use the blender with an empty jug, and do not remove or relocate the jug while the device is turned on.
15. Clean any water droplets from the base of the blender before use to prevent water from entering the motor and causing damage.
16. Do not clean the interior of the jug with your hands if any residue is left inside. Use a liquid cleaning agent to clean it instead.
17. Unplug the power cord from the socket before cleaning the drive unit.

Thank you for purchasing our product. Please read this manual carefully before using it for the first time.
In order to provide you with the best technical solutions for your devices, we are constantly developing them technologi-cally. Therefore, the pictures and drawings in this manual may differ from the purchased device.
NOTE: Keep this manual in a safe place that is accessible to personnel. The manufacturer reserves the right to change technical parameters of the devices. Copying of this manual without permission of the manufacturer is prohibited.

SAFETY INSTRUCTIONS:

• Incorrect maintenance and/or use may cause serious harm to people and damage the device.
• The device can only be used for the purpose for which it has been designed.
• The manufacturer does not take any responsibility for damages caused by improper maintenance or use of the device.
• When in use, secure the device and its electrical plug from any contact with water or other fluids. In case the device is accidentally dropped into water the electrical plug should be immediately removed from the socket and the device should be inspected by a trained professional.
• ATTENTION: Failure to obey these instructions may cause life threatening danger.
• Never open the casing of the device on your own.
• Do not stick any objects into the casing of the device.
• Do not touch the electrical cord with wet hands.
• Check the condition of the electrical plug and cord regularly. In case any damage to the plug or cord is discovered order repair by a specialized service provider.
• In case the device is dropped or damaged otherwise, before further use always order a check-up and repair by a spe-cialized service provider.
• Do not make any attempts to repair the device on your own – this may cause life threatening danger.
• Protect the electrical cord from contact with sharp or hot objects and keep it away from open fire. When you discon-nect the device from the electrical socket always hold the plug and never pull the electrical cord.
• Secure the electrical cord (or the extension cord), so that it is not unplugged by mistake and so that no one can stum-ble over it.
• Monitor functioning of the device while in use.
• Use of the device by people underage, physically or mentally incapable, with motion disorders as well as people witho-ut proper experience and knowledge regarding the use of this device should not be allowed. All of the above should only use the device under supervision of a person responsible for their health and safety.
• When not used or during maintenance you should always unplug the device from the source of electricity by removing the electrical plug from the socket.
• ATTENTION: when the electrical plug is plugged into the socket the device is constantly live.
• Turn off the device before you pull the plug from the power outlet.
• The device must be visible and easily accessible after installation.
• Ensure easy access to the plug of the non-removable power cord.
• For your safety and to prevent damage to the blender, do not put your hands or any utensils into the container when the unit is on.
• The knives are very sharp. Special care should be taken.
• Always use the blender with the lid properly placed on the container.
• If the pusher is placed in the lid, the container should be filled to no more than 2/3 of its volume.
• Blending should not take more than one minute, too long operation can cause overheating of the device. In this case, unplug the device, wait until it cools down ( about 60 minutes).
• Use the blender on flat, stable and dry surfaces.
• Before turning on the device, make sure that the container and lid are properly placed and secured. Hold the appliance by the lid with your hand before turning it on and during operation.
• Use caution when blending hot liquids. Start work at the lowest speed, gradually increasing the speed.
• When blending hot liquids, remove the lid cap.
• Never use the pusher if the lid has not been placed on the container. Remove the lid cap before using the pusher.

TECHNICAL DATA

CONSTRUCTION OF THE DEVICE

1. lid cap
2. jug lid
3. jug
4. attachment mat for jug
5. infinitely variable speed regulator
6. on/off switch
7. pulse switch
8. timer
9. base
10. rubber feet

Control panel

OPERATION OF THE DEVICE

1. Insert the power plug into the power outlet.

2. Place the jug in the drive socket. Make sure it is correctly and stably attached.

3. Set the TIME knob to the START position (continuous operation, no countdown function).

4. Put on the lid of the jug.

5. Press the POWER ON/OFF button.

6. To turn off the blender operation, press the POWER ON/OFF button again.
   Note: Be sure to hold the jug by the handle while the machine is running.
   Note: When the time control knob is set to the 0-5 position, the blender will only operate with the PULSE function.

7. Cutting element speed adjustment:

   • LOW – lowest rpm
   • HIGH – highest rpm
   • PULSE button (maximum speed, requires the button to be held down while the blender is running).

Timer – timer switch

1. Set the desired operating time of the device.
2. Press the POWER ON/OFF button.
3. When the time is up, the blender will automatically turn off.

NOTES

1. Before using, place the blender on a clean, dry and flat surface.
2. Before crushing ice, place any liquid ingredient in the container.
3. Do not use the blender when the container is empty and do not remove or rearrange the container when the unit is on.
4. Do not turn on the device without the container in place
5. Carefully remove any traces of water on the pad before use. Otherwise, water may be drawn into the unit and cause damage to the motor.
6. Make sure the blender jug is securely attached to the main unit before use.

CLEANING AND MAINTENANCE

To clean the container:

• Pour a small amount of warm water with dishwashing liquid into the container.

• Put the lid on and turn the blender on for about 10 seconds.

• Rinse the empty container, turn it over and let it dry.
  Thanks to the high rotational power, you can easily remove most of the dirt using water with dishwashing liquid.
  Note: Do not clean the inside of the container by hand unless the cutting part has been removed from inside.
  Note: unplug the power cord from the electrical outlet before cleaning the drive body.
  To clean the drive body:

• Use only a damp cloth.

• Never immerse the drive body in water.

ADDITIONAL INFORMATION

The blender is equipped with an automatic thermal protection system for restarting the device in case of overload. In case of overload, the device automatically shuts down. Unplug the blender from the power outlet, remove the products causing the malfunction, wait 60 minutes to start working again. If the blender continues to work improperly, contact the dealer from whom you purchased the blender or the nearest distributor. Repairing the device on your own will void the warranty

DISPOSING OF USED EQUIPMENT

Information for users about the proper principles of disposal of waste electric and electronic equipment.

• Leave the old device in the store where you are buying a new device. Each store has an obligation to take your old equipment free of charge if you buy new equipment of the same type and in the same quantity. The only condition is to deliver the equipment to the store at your own expense.
• Take the used device to a collection point. You will find information about the nearest location on the municipal website or bulletin board of the municipal office.
• Leave the device at the service point. If the repair of the device is uneconomical or impossible for technical reasons, the service is obliged accept the device free of charge.
• Return used equipment without leaving your house. If you don’t have the time or ability to transport your equipment to a collection point, you can use the services of specialized companies.
  Remember! Do not dispose of used equipment along with household waste. This could cause high fines.
  The symbol of the crossed-out waste bin on the product, its packaging or the instruction manual means that the product should not be disposed of to normal waste bins. The user is obliged to hand over the used equipment to a designated collection point for proper processing.

WARRANTY

The seller shall be liable under the warranty or guarantee.
Damage resulting from the formation of lime scale deposits in the device are not subject to repair under the warranty.
The consequences of improper use contrary to the intended use and improper daily maintenance are not subject to warranty repair.
Warranty exchange does not cover such elements as: light bulbs, rubber components, heating elements damaged by
lime scale, screws and elements undergoing natural wear, e.g. rubber seals and all kinds of mechanically damaged elements.
Any damage of components resulting from improper use is also excluded from the warranty. The warranty is
automatically voided in the event of a broken warranty seal or independent repairs.

Stalgast Sp. z o.o.
Plac Konesera 9, Budynek O, 03-736 Warszawa tel.: 22 517 15 75 fax: 22 517 15 77
www.stalgast.com email: stalgast@stalgast.com

Tel.: +48 22 509 30 77 export@stalgast.com www.stalgast.eu

References

• ELECTRO – SYSTEM S.A. Organizacja Odzysku SEiE
• Stalgast | Professional catering equipment | Poland

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>