Continental Edison CELED53HP20V2B4 Bluetooth Karaoke Trolley Luminous Speaker Instructions

CELED53HP20V2B4
Bluetooth karaoke trolley luminous speaker
Instruction booklet
Instructions

IMPORTANT SAFETY WARNINGS

Before starting to use this device, please read carefully and  completely the instructions contained in this booklet.
It is recommended to keep together this booklet and the device for  future consultation. If this device is to be passed to somebody else,  please make sure that the booklet is passed along with the device so that the new user can read it before use.

** The lighting flash and arrow head within the triangle is warning sign alerting you of dangerous voltage inside the product
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK)_ NO USER SERVICIABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
** The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product

OVERALL SAFETY

• Make sure the unit is not exposed to rain or a moist environment to avoid any risk of fire or electric shock!
• Please  avoid  splashing  the  device  with  water;  no  object containing liquid, such as a vase, must be placed on the device.
• This unit is intended for use in temperate climates only.

Power: Before plugging into the mains socket, please read the specifications on the label.| Never handle the power plug with wet hands.
---|---
|
Never place heavy objects on the unit. Avoid direct sunlight.| Never open the unit. Avoid dropping metal objects inside the
unit.
|
Mains plug: Avoid pulling or stepping on it too much, bending or pinching it too tightly.| Unplug the mains plug from the socket when the device is not in use for a long period of time.
|

ELECTRIC SUPPLY
THE  POWER  CORD  MUST  REMAIN  EASILY  ACCESSIBLE  IN  ORDER TO BE ABLE TO DISCONNECT THE DEVICE IN CASE OF EMERGENCY.

1. Please unplug the product in case of prolonged non‐use.
2. If  the  supply  cable  is  damaged,  it  must  be  replaced  by  the manufacturer  or  qualified  after‐sales  personnel  to  avoid  any danger.
3. This product must be connected to an electrical supply 100‐240V ~ 50/60Hz.
4. The plus must be accessible after installation.
5. Hold the plug well when you plug the power cord in or out.
6. Please  do  not  put  the  AC  power  cord  near  any  heat  source equipment.
7. Please do not place any heavy objects on the AC power cord.
8. Please do not overhaul the AC power cord.
9. This product contains a low power laser device. In order to keep safety, please do not open the unit to expose the inside parts. If there  is  some  problem  need  to  be  repaired,  please  let  the professional people check and repair it.

IMPORTANT SECURITY INSTRUCTIONS

1. Do not use the unit in places that are extremely hot, cold, dusty or humid.
2. Do  not  keep  the  unit  in  a  high  humidity  area  such  as  a bathroom,  kitchen  sink  or  pool.  Keep  the  unit  away  from heaters, stoves, etc. Never leave the unit in an area exposed to direct  sunlight  where  there  could  be  a  considerable  rise  in temperature.
3. The unit should not be exposed to dripping or splashing, and no objects filled with liquids such as vases, should be placed on the unit.
4. Do  not  block  any  ventilation  openings.  The  ventilation  should not be impeded by covering the ventilation openings with items such as newspapers, table‐cloths, curtains and the like.
5. Install  the  unit  in  accordance  with  the  manufacturer’s instructions.
6. Do  not  use  attachments/accessories  not  recommended  by  the product manufacturer.
7. Power‐supply cords should be routed so that they are not likely to  be  trapped  in  any  way.  Also  protect  the  power  cord  from being  walked  on  or  pinched,  particularly  at  plugs,  convenience receptacles and the pointers where they exist from the unit.
8. This  product  should  be  operated  only  from  the  type  of  power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery  power,  or  other  sources,  refer  to  the  operation instructions.
9. The mains plug is used as disconnect device. The mains plug of unit  should  not  be  obstructed  OR  should  be  easily  accessed during  intended  use.  To  be  completely  disconnect  the  power input,  the  mains  plug  of  unit  should  be  disconnected  from  the mains.
10. If the unit is not used for a period of time, unplug the power cord.
11. If  it  is  lightening,  unplug  the  power  cord  to  prevent  the  unit from unnecessary damages.
12. This product should be handled with care to avoid damage or injury.
13. Never  open  the  housing  or  touch  the  components  inside  to avoid  the  risk  of  electric  shock  or  burns.  If  service  is  required, please get in touch with a qualified technician.
14. Refer  all  servicing  to  qualified  service  personnel  in  the following cases: the unit does not operate normally or has been damaged, the power cord or plug is damaged, liquids spilled into the  unit,  any  hard  object  fallen  on  the  unit,  the  unit  has  been dropped, the unit has been exposed to rain or moisture.
15. The marking information is located at the back of the unit.
16. Attentions  should  be  drawn  to  the  environmental  aspects  of batteries disposal.
17. Use the unit in moderate climates.
18. Never insert any object, including your fingers, into the unit.
19. For  a  portable  sound  system,  a  warning  that  excessive  sound pressure  from  earphones  and  headphone  can  cause  hearing loss.
    To prevent possible hearing damage, do not listen at high volume levels for long periods.

To avoid possible hearing damage, do not listen at a high volume level for a long time.

 MAINTENANCE OF THE UNIT

1. Pull the mains plug out of the socket before cleaning the unit.
2. Use  a  piece  of  wet  cloth  for  cleaning.  Do  not  use  strong detergents to avoid damaging the unit.
3. Avoid  using  liquid  detergents  as  it  can  penetrate  into  the  unit and generate an electric shock. This kind of liquid can also spoil the surface of the unit.
4. If  dust  builds  up  on  the  lens,  the  disc  playing  may  be  impaired and at times impossible.
5. Under  the  following  circumstances,  condensed  dew  may  build up on the lens:
   a) When a heat source is just turned on nearby.
   b) In a very damp place.
   c) When  the  unit  is  moved  from  a  colder  place  to  a  hotter one.

Regarding installation, handling, cleaning and disposal of the unit, please refer to the appropriate chapters of this user’s guide.

Meaning of the CE conformity marking
The ****marking  indicates  that  the  product  complies  with  the  main requirements  of  the  European Directives: 2014/53/UE (Radio equipment), 2014/30/UE (Electromagnetic compatibility), 2014/35/EU (Low  voltage)  and 2011/65/UE  (Restriction  on  the  use  of  certain  hazardous  substances  in electrical and electronic equipment).

This guide is available in the following languages:
‐ FR (original version)
‐ EN (translated from the original version)
‐ ES (traducido del original)
‐ PT (traduzido do original)
Any other translation would be a translation of the original version.
This guide is available on our website, as well as any potential modifications or new version.

DESCRIPTION OF THE UNIT

Up & Front Face

1. ON/OFF Button
2. MIC: 2x 6.35 mm inputs for microphone
3. Red LED indicator: battery in charge
4. Green LED indicator: battery fully loaded
5. DC 9V IN: AC adaptor input
6. AUX Input (3.5mm)
7. USB 2.0 Port
8. SD memory card Port
9. Microphone ECHO button
10. Microphone Volume button
11. TREBLE button
12. BASS button
13. Main VOLUME button
14.  : Next track
15.  : PLAY/PAUSE
16.  : previous track
17. MODE button: switch between Bluetooth and AUX
18. REPEAT button: repeat tracks
19. EQ: equalizer button
20. REC : record button
21. MIC PRIORITY button: to give microphone the precedence
22. LED Display

Back Face

TECHNICAL SPECIFICATIONS

SD memory card
AUX-IN 3.5mm input
Inputs| AUX-IN
2X 6.35 mm
Battery| Rechargeable li-ion 7.4V 1800mAH
21CR21/37/67
Battery autonomy| 3-4 hours
Battery charging time| 4-5 hours
AC adaptor| Input: AC 110-240V ~ 50/60Hz Output: DC 9.0V 1.2A
Power input| 9.0V 1.2A
Battery input| 7.4 V 1.8 A
Working temperatures| 5°C~40°C
Dimensions/Weight| 255x201x740 mm / 6.9Kg

AC ADAPTOR

INOVALLEY
RC PONTOISE 572 164 028
37 rue Ampere
95300 ENNERY — France| –| –
Model Reference| HNO90120AEU1D|
Input voltage| 100-240| V
AC Frequency| 50/60| Hz
Output voltage| 9.0| V
Output current| 1.| A
Output power| 11.| W
Average efficiency in active mode| 93.|
Low-load efficiency (10%)| 85.|
Power consumption without load| 0.08| W

PACKAGE CONTENT

• 1 trolley speaker
• 1 remote control (powered by 2X AAA 1,5V batteries, not included)
• 1X  6.35mm wired microphone
• 1 AC adaptor

INSTALLATION

Location

• Install the unit on a flat surface. Do not place heavy objects on the unit.
• Allow 5 cm (minimum) all around the unit to ensure adequate ventilation.

Unpacking and disposal of packing items

• Packaging carton and paper sheets are recyclable: they should be disposed of in appropriate collection bins.

• Materials bearing the symbol are recyclable, such as:
  ˃PE< = polyethylene
  ˃PS<  = polystyrene
  ˃PP<  = polypropylene

• These materials can be recycled if they are disposed of in appropriate collection bins.

• Other  packaging  materials  (adhesive,  fasteners,  etc.)  must  be  disposed  of  with household waste.

Connection to power supply

• Connect one end of the AC adaptor to the back of the unit, and the other end to a mains plug.
• To switch the unit on, place the button located on the top of the unit to theON position.

Notes:
‐ AC adaptor electrical specifications: 100‐240V~ /50‐60Hz.
‐  If  the unit is not going to be used for a long time, please unplug  the unit from the mains supply.
‐ In stormy weather, it is advisable to unplug the cables from the electrical outlets.

REMOTE CONTROL

1. Installing batteries into the remote Start by inserting two AAA 1.5V batteries into their appropriate compartment.
   NB: The two AAA 1.5V batteries are not included.
   To replace the batteries, open the battery compartment and insert 2 new ones of the same type.

WARNING
The batteries may explode if they are not installed correctly.
Replace only with the same or equivalent type.

Note: Use the remote control within 5 meters of the unit, and aim the unit at an angle not exceeding 30°.

Notes:

1. Do not use rechargeable batteries.
2. If  the  remote  will  not  be  used  for  a  long  time,  please  take  out  the  batteries  and store them in a dry and cool place.
3. Do not expose the remote to high temperature and humidity.
4. Never try to disassemble the remote.
5. Make sure to avoid reflections from mirrors or glass panels that could impair the infrared signal of the remote.

Description of the remote control

1.  :  STANDBY
2. MODE: Select Bluetooth mode or LINE mode
3. STOP
4. MUTE: to mute the sound
5.  / CH‐ : Previous track/Fast rewind (USB/SD)
6.  / CH+ : Next track/Fast forward (USB/SD)
7. VOL+ : Increase volume
8. VOL‐ : Decrease volume
9.  : PLAY/PAUSE
10. REPE : Repeat button
11. E/R : Equalizer
12. Boutons 0, 1, 2… 9

MICROPHONE

1. Description of the microphone
2. Using the microphone

1‐ Plug the 6.35 mm jack in either 6.35 mm ports of the unit.

2‐ Turn on the microphone by switching the ON/OFF button, on ON.
3‐ Use the buttons 9, 10, 11 and 12 to adjust your voice to your liking.
4‐ After use, turn off the microphone by setting the switch to OFF.

Notes :
‐ For optimal use, use the microphone at a distance of 5 to 10 cm from the mouth.
‐ Move the microphone away from the speakers.
‐ Do not store the microphone at high temperatures or in a humid environment.

OPERATING INSTRUCTIONS

1. Bluetooth
   ‐ Turn  on  the  unit,  activate  the  Bluetooth  mode  by  pressing  MODE: the  word  “BLUETOOTH”  starts  flashing  on  the  display,  and  a  sound  is emitted  by  the  unit.
   ‐ Search and pair the CELED53HP20V2B4unit with your external Bluetooth device (smartphone, PC, etc.).
   ‐ When pairing is successful, the word BLUETOOTH stops flashing and a sound is heard.
   Note:  The remote can be used to control the speaker commands.

2. USB / SD function
   ‐ Insert a USB device or SD memory card containing music into the corresponding ports (7) or (8).
   ‐ Switch to USB or SD mode by pressing MODE (17).
   ‐ Playback starts automatically upon insertion.
   ‐ Press on to Play or Pause.
   ‐ Use /   to select a particular track.
   ‐ Use VOL+ and VOL‐ to adjust the volume.

3. AUX‐IN function
   ‐ Press  MODE  to  activate  the  LINE  mode.  The  word  “LINE”  is displayed  on  thescreen.
   ‐ Connect  a  3.5mm  jack  type  audio  cable  (not  included)  to  the  AUX port,  thenconnect  the  other  end  to  an  external  audio  source  (i.e.: MP3  player, PC,tablet…).
   ‐ Open the media player of the external audio source, and press the button to start (or pause) the playback.
   Note: You can use the remote to control the volume or the commands of the unit and the audio source.

4. Recording
   ‐ Connect in the adequate ports a USB device and microphone (supplied) to the unit.
   ‐ Press REC to start recording.
   ‐ Press REC again to stop recording.
   ‐ With the USB device connected, use the /  buttons to select a particular track.
   ‐ To erase a recorded file, press and hold the REC button while playing back the file.

5. Charging the battery
   ‐ Connect one end of the AC adapter to the mains outlet and the other end to the DC 9V input of the unit.
   ‐ There are 2 LED indicators for the battery on the top of the speaker:
   ‐ Indicator (3) lights red when the battery is charging,
   ‐ Indicator (4) lights green when the battery is fully charged.
   ‐ The battery is fully charged after 4 to 5 hours.
   ‐ Unplug the unit first, then the AC adapter from the mains outlet.
   Note: The unit can be used while the battery is in charge.

TROUBLESHOOTING

In case of malfunction, please refer to the table below before calling for service.

then check all cables.
Bluetooth device is not active.| Re-do Bluetooth search and pair.
Volume is on « 0 » or « Mute ».| Check volume or button position.
If, after completing the above checks, the problem is not solved, please contact the appropriate service department. Never try to open the case: if you do, we will not take any responsibility.

For any other problems with your device: please contact the After Sales Service.

WARRANTY

The warranty does not cover the wear and tear of components of the product, as well as any problem or damage resulting from:

1. Surface deterioration due to normal wear and tear of the product;
2. Damage or deterioration caused by contact of the product with food or liquids,or due to corrosion caused by rust;
3. Any unauthorized incident, abuse, misuse, modification, disassembly or repair;(4) Improper maintenance, improper use of the product, or incorrect voltage connection;
4. Any use of accessories not supplied or approved by the manufacturer.

**** Removal of the nameplate and/or the serial number will void the warranty.

DISPOSAL

This device comes with a selective sorting symbol for waste electrical and electronic equipment (WEEE).
This implies that this product must be handled by a selective collection system in accordance with European Directive 2012/19/EU so that it can be either dismantled or
recycled, thereby reducing the impact on the environment.
For more information, get in touch with your local or regional administration.
Electronic products that have not been sorted selectively are potentially dangerous for the environment due to the presence of hazardous substances.

This unit comes with a removable rechargeable battery that can be replaced.
Used batteries must be handled by a selective collection system in order to be recycled and thus reduce the impact on the environment.
When a battery reaches the end of its useful life, you are required to deposit it  in  an  appropriate  selective  collection  system  which  will  take care  of  its destruction and/or recycling.
Under no circumstances should you throw the device or battery on the public road.

SIMPLIFIED EU DECLARATION OF CONFORMITY
Continental Edison, declares that the radio equipment type CELED53HP20V2B4 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: https://notice.continentaledison.fr/ »

www.continentaledison.fr

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>