hama 00 118097 TV Stand Instruction Manual

: June 3, 2024
: Hama

Table of Contents

Explanation of Warning Symbols and Notes
Required tools
Installation kit
Package Contents
- Safety Notes
Intended use and specifications
Installation requirements and installation
Setting and maintenance
Securing with an attachment cable
Warranty Disclaimer
Service & Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

hama 00 118097 TV Stand Instruction Manual

Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Explanation of Warning Symbols and Notes

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note
This symbol is used to indicate additional information or important notes.

Required tools

Installation kit

Package Contents

TV Stand (1x)
Installation kit (see contents, Fig. 1)
Attachment kit (see contents, Fig. 1)
These operating instructions

Note
Please check that the installation kit is complete before installing the TV Stand and ensure that none of the parts are faulty or damaged.

Safety Notes

Warning

Maintain the necessary safety clearance around the attached load (depending on the model).
In the event of damage to the product, remove the attached load and stop using the product.
Ensure that the electrical cables are not crushed or damaged during installation.
Do not place loads on the TV stand that are heavier than the specified load bearing capacity, and do not exceed the specified maximum screen size.
Ensure that the load on the TV stand is symmetrically balanced.
Read the operating instructions for your terminal device before attempting to mount it. The instructions provide information about the type and measurements of suitable fastening materials.
If the supplied mounting kit does not contain suitable fastening materials for mounting the terminal device, purchase these from a specialised dealer.
Never apply force during installation. This can damage your terminal device or the product.
If in doubt, have this product mounted by a qualified technician – do not attempt to mount it yourself!
Place the product only on flat, non-slip surfaces that can bear the weight of the product and the device attached to it.
Keep the packaging material out of the reach of children due to the risk of suffocation.
Dispose of packaging material immediately according to locally applicable regulations.
Do not modify the product in any way. Doing so voids the warranty.
Do not attach any other objects to the product.
Do not mount the product above locations where persons might linger.

Intended use and specifications

The product is used for mounting flat panel displays for non commercial, private household use.
The product is intended for indoor use only.
Use the TV stand for the intended purpose only

Screen size:	81.0 – 165.0 cm (US: 32″ – 65″)
Mounting holes:	according to the VESA standard until 600×400
Loading capacity:	40 kg
Width / Height/ Depth	90.5 cm/ 83.0 cm/ 34.2 cm

Installation requirements and installation

Note

Only mount the TV stand with the help of a second person! Get the support and help you need.
Ensure that no electrical cables are crushed or damaged during installation or adjusting.
Once you have mounted the product and the attached load, check that they are sufficiently secure and safe to use.
Observe the other warnings and safety instructions.
Proceed step-for-step in accordance with the illustrated installation instructions (Fig. 1 ff.).

Note

Given the multitude of terminal devices available on the market, we cannot describe all possible mounting options here.
Please ensure that the bracket lays flat and evenly on the back of the television.
Use the enclosed spacer to even out any unevenness on the back of the television.
Ensure that all screws have the proper length and can be mounted until they are hand-tight (see Fig. 3)

Setting and maintenance

Note – Height adjustment

Only adjust the bracket with the help of a second person. Get the support and help you need.
When doing so, ensure that the product does not exceed its maximum permitted carrying capacity and that no load exceeding the maximum permitted dimensions is attached (fig. 4).

Note – Set/adjust the tilt

To permanently set the tilt, loosen the lateral attachment screws, set the desired tilt and then tighten the screws again (refer to fig. 5).
To flexibly adjust the tilt, tighten the screws hand-tight. This allows the screen to be adjusted at any time.
Check that the bracket is secure and safe to use at regular intervals (at least every three months). Only use water or standard household cleaners for cleaning.
To secure the carrying arms, attach them to the TV stand and secure them with the screws (E3).
If the rotate function is stiff, loosen the screw on the hinge slightly using the E6 tool (fig. 5).

Securing with an attachment cable

Note

For screens with a diagonal screen size of more than 55 inches and total height of more than 100 cm, the holder must be additionally secured to a wall.
Observe the enclosed warning notice.

Warning

Before installing the bracket, ensure that the wall on which the television is to be mounted is suitable for the weight and make sure that no electrical wires, water, gas or other lines are located at the installation location.
Please note that the provided wall anchors are only approved for concrete and solid brick walls.
If the wall on which the bracket is to be mounted is made of different material types and construction types to those specified, purchase suitable mounting materials from a specialised dealer.
Observe the other warnings and safety instructions.
Proceed step by step according to the illustrated installation instructions provided in the enclosed warning notice.

Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.