WASSERSTEIN Pogo Pin Cable and Adaptor for Nest Cam User Manual
- June 2, 2024
- WASSERSTEIN
Table of Contents
WASSERSTEIN Pogo Pin Cable and Adaptor for Nest Cam
In the Box
Refer to the illustration below for setting up the pogo pin cable
with your Nest Cam: 
How to Install
-
Mount your Nest Cam.
-
Plug the pogo pin end of the cable into your Nest Cam.
Note: Cable must be facing toward you to connect to the Nest Cam. -
Plug the USB end of the cable into the adaptor provided.
-
Plug the adaptor into an outlet.
-
After the pogo pin is connected, open the Google Home app on your mobile device to confirm it is synched and ready to use.
Specifications
- Adaptor output: 5.2V DC, 2A
- Adaptor input: 100 – 240V AC, 50/60Hz
- Cable length: 26.25 ft.
Get More Support
Scan the QR code below or email us at: contact@wasserstein- home.com
Google Nest Cam (battery) is not included.
Google Nest Cam is a trademark of Google LLC.
Wasserstein is not affiliated with Google LLC.
Wasserstein is a trademark of Drop cases Ltd.
www.wasserstein-home.com
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>