WASSERSTEIN Wyze Video Doorbell Wall Plate User Manual
- June 2, 2024
- WASSERSTEIN
Table of Contents
WASSERSTEIN Wyze Video Doorbell Wall Plate
In the Box
1 x wall plate
|
2 x wall anchors
|
2 x mount screws
---|---|---
Safety Information
- Read these instructions carefully before use. Failure to follow the safety instructions may cause injury and damage to your property.
- Small parts contained in the box can be a choking hazard. Keep small parts away from children.
- Only use this wall plate with the Wyze Video Doorbell Pro.
Pre-Installation
-
Turn off the power of your existing video doorbell at the electrical panel.
Note: Always consult a professional electrician before working with electrical wires. -
Remove your existing video doorbell (if any) from the wall.
Installation
-
Place the doorbell backplate on top of the wall plate and screw them both onto the wall (drill size is 1/8 in).
-
If you have a wired doorbell, connect the wires first before securing it to the wall plate.
-
Turn on the doorbell. Hook the tabs at the back and press firmly on wall plate until it clicks into place.
-
Check the view from the App, then secure the doorbell with a screw at the bottom.
Installation with Angle Mount
-
Screw the wall plate and angle mount together onto the wall (drill size is 1/8 in).
-
Screw the doorbell’s backplate onto the angle mount using the original screws that come with the doorbell.
-
If you have a wired doorbell, connect the wires first before securing it to the wall plate.
-
Turn on the doorbell. Hook the tabs at the back and press firmly until it clicks into place.
-
Check the view from the App, then secure the doorbell with a screw at the bottom.
Specifications
Compatibility: Wyze Video Doorbell Pro
Dimensions: 7.28 x 3.54 x 0.30 in
Get More Support
Scan the QR code below or email us at: [email protected]
Wyze Video Doorbell Pro is not included.
Wyze Video Doorbell Pro is a trademark of Wyze Labs, Inc.
Wasserstein is not affiliated with Wyze Labs, Inc.
Wasserstein is a trademark of Drop cases Ltd.
