WASSERSTEIN Horizontal Wedge for Wyze Video Doorbell Pro User Manual
- June 2, 2024
- WASSERSTEIN
Table of Contents
WASSERSTEIN Horizontal Wedge for Wyze Video Doorbell Pro
In the Box
1 x horizontal wedge
|
2 x mount screws
|
2 x short screws
|
2 x tiny screws
|
2 x tiny screws
---|---|---|---|---
Pre-Installation
- We recommend using a magnetic screwdriver to easily place the screws in.
- Do not install the tiny screw to lock the Horizontal Wedge before securing it to the wall.
-
Turn off the power of your existing video doorbell at the electrical panel.
Note: Always consult a professional electrician before working with any electrical wires. -
Remove your existing doorbell (if any) from the wall.
Installation
-
Pull the Horizontal Wedge apart gently.
-
Mount the wall plate from the wedge using mount screws and wall anchors provided (the drill bit size is 1/8 in).
-
Re-attach the wedge onto the wall plate. Make sure the angle mount firmly clicks onto the wall plate.
-
Install the wall plate from the Wyze Video Doorbell Pro onto the wedge using the short screws provided.
-
Turn on the doorbell. Press it against the wall plate until it clicks into place. If you are using the wired version of the doorbell, connect the wires to the doorbell as shown in the image below, then attach the doorbell onto the wall plate.
Wireless setting:
Wired setting:
-
Check the view from the App. Adjust the Horizontal Wedge to your preferred angle and fix it with the tiny screws on both sides.
-
Lock the doorbell onto the wall plate with the screw at the bottom of the doorbell.
Installation with Wasserstein Wall Plate
The Horizontal Wedge is also compatible with the Wasserstein wall plate. Align the Wasserstein wall plate together with the wedge’s wall plate and mount them onto the wall, then follow the steps above to install the Horizontal Wedge and the doorbell.
Get More Support
Scan the QR code below or email us at: contact@wasserstein-home.com
Wyze Video Doorbell Pro is not included.
Wyze Video Doorbell Pro is a trademark
of Wyze Labs, Inc.
Wasserstein is not affiliated with Wyse Labs, Inc.
Wasserstein is a trademark of Drop cases Ltd.