LOREX LNE9383 Series 4K Motorized Varifocal IP PoE Wired Dome Camera User Guide

June 2, 2024
Lorex

Quick Start Guide
LNE9383 & LNE9393 Series
lorex.com 
4K Motorized Varifocal IP PoE Wired Dome Camera

Safety Precautions

  • Follow all instructions for safe use and handling of the product.
  • Use the camera within given temperature, humidity and voltage levels noted in the camera specifications.
  • Do not disassemble the camera.
  • Do not point the camera directly at the sun or a source of intense light.
  • Periodic cleaning may be required. Use a damp cloth only. Do not use any harsh, chemical-based cleaners.
  • The supplied cable is rated for surface mounting only (Non-UL). Cables for in-wall and floor-to-floor installations are sold separately (CMR type). These and other cables are available at lorex.com.
  • It is recommended to connect the camera to the NVR or an external PoE switch. If using a power adapter with this camera, a REGULATED power supply is REQUIRED (not included). Use of a non-regulated, non-conforming power supply can damage this product and voids the warranty.

Disclaimers

  • Use the camera only with compatible Lorex recorders. For a full list, visit lorex.com/compatibility.
  • Not intended for submersion in water. Installation in a sheltered location recommended.
  • This camera includes an Auto Mechanical IR Cut Filter. When the camera changes between Day/Night viewing modes, an audible clicking noise may be heard from the camera. This clicking is normal, and indicates that the camera filter is working.
  • Audio recording and/or face recording without consent is illegal in certain jurisdictions. Lorex Corporation assumes no liability for use of its products that does not conform with local laws.

Package Contents

4K Motorized Varifocal IP PoE Wired Bullet Camera

Mounting Kit*

Allen Key*

Overview

  1. Rear Cable Notch
  2. Camera Base
  3. Adjustment Screw
  4. Camera Lens
  5.  Infrared Lights
  6. Camera Dome Cover
  7. Ball Camera
  8. MicroSD Card Slot
  9.  Reset Button

Camera Mounting Tips

  • Install the camera in a location that is difficult for thieves and vandals to reach.
  • Secure cabling so that it is not exposed or easily cut.
  •  Point the camera where there is the least amount of obstructions (i.e. tree branches).
  • Take into consideration what you want to monitor and where is the best coverage area.
  • Place your camera close to the area of interest. The best position is 10ft/3m above ground, angled 15° down.

Mounting Your Camera

LOREX LNE9383 Series 4K Motorized Varifocal IP PoE Wired Dome Camera -
fig3

Test your camera prior to selecting a permanent mounting location.

  1. Use the included Allen key to loosen the adjustment screw, then remove the camera base.
  2. Use the included mounting template to drill holes for screws. Insert the included drywall anchors.
  3. Feed the cable through the mounting surface or the camera base’s cable notch, and then connect the cables as shown in “Connecting Your Camera”, pages 7-8.
  4. Mount the camera base to the mounting surface using the included screws.
  5. Align the camera with the camera base. Ensure that the camera dome cover lays flat against the camera base.
  6. Use the Allen key to tighten the adjustment screw halfway, adjust your ball camera’s position asneeded, and then tighten the adjustment screw all the way.
  7. Remove the vinyl film from your camera lens when your installation is complete.

Connecting Your Camera

Option 1
Connect your camera directly to your recorder’s camera connection (PoE) port using an Ethernet extension cable (not included).LOREX LNE9383 Series
4K Motorized Varifocal IP PoE Wired Dome Camera - fig4

Option 2
Connect your camera to an external PoE switch on your network using an Ethernet extension cable (not included). Ensure your switch is connected to the same network as your recorder.LOREX LNE9383 Series 4K Motorized
Varifocal IP PoE Wired Dome Camera - fig5

Camera Cable Options

For different UL CMR approved cable lengths, visit lorex.com and search for the specified cable type in the table.

Cable Type Max. Cable Run Distance Max. Cable Coupler
CAT5e (or higher) Ethernet Cable 2,000ft (609m) 1

Need Help?

For up-to-date information and resources, scan the QR code or visit:

https://help.lorextechnology.com/series/lne9383-lne9393-series
LNE9383 & LNE9393
help.lorex.com

  • Download product guides
  • Find related troubleshooting tips & FAQs

Register Your Product
Please see our full Terms of Service and Limited Hardware Warranty Policy at:

lorex.com/warranty
Copyright © 2022 Lorex Technology Inc.
As our products are subject to continuous improvement, Lorex reserves the right to modify product design,
specifications and prices, without notice and without incurring any obligation. E&OE. All rights reserved.
LNE9383-LNE9393_Series_QSG_TRILINGUAL_R1

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals