MIERES WYZW368394711 2-Light Wall Sconce Instruction Manual

WYZW368394711 2-Light Wall Sconce

Product Information

The product is a lighting fixture with model numbers #2192XX and 2193XX. The product comes with a set of assembly and installation instructions that should be read carefully before installing the fixture. The fixture must be installed in accordance with local and National Electrical Code (N.E.C.) standards. The package includes a BACK PLATE, FIXTURE MOUNTING SCREWS, DECORATIVE NUTS, GLASS SHADE, SOCKET, SOCKET RING, and COVER PLATE.

Product Usage Instructions

1. Turn off the main power at the circuit breaker before installing the fixture to prevent possible shock.
2. Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions.
3. At the center of the BACK PLATE, there are eight perforated slots. Knock out the set that matches your OUTLET BOX.
4. Screw the #8-32 FIXTURE MOUNTING SCREWS into the BACK PLATE and thread the 5/32 HEX NUTS onto the FIXTURE MOUNTING SCREWS. Secure the position of the FIXTURE MOUNTING SCREWS by tightening the HEX NUTS against the BACK PLATE.
5. Carefully pass the power supply wires and the SUPPLY GROUND WIRE through the center hole of the BACK PLATE. Secure the BACK PLATE to the OUTLET BOX with MOUNTING SCREWS.
6. Place the COVER PLATE onto the FIXTURE MOUNTING SCREWS, and secure it into place using the DECORATIVE NUTS provided.
7. Slide the GLASS SHADE over the SOCKET, secure it with the SOCKET RING.
8. Screw a light bulb into the socket and make sure it does not exceed the maximum wattage specified on the fixture’s wattage rating label.
9. The installation is now completed.

ASSEMBLY & INSTALLATION INSTRUCTIONS FOR #2192XX & 2193XX

Please read carefully and save these instructions, as you may need them at a later date.

CAUTION
Turn off the main power at the circuit breaker before installing the fixture, in order to prevent possible shock.

GENERAL
All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician.
Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions.

ASSEMBLY AND INSTALLATION

1. At the center of the BACK PLATE (2) there are eight perforated slots. Knock out the set matches your OUTLET BOX (1).

2. Screw the #8-32 FIXTURE MOUNTING SCREWS (13) into the BACK PLATE
   (2) and thread the 5/32 HEX NUTS (12) onto the FIXTURE MOUNTING SCREWS (13), as shown. Secure the position of the FIXTURE MOUNTING SCREWS (13) by tightening the HEX NUTS (12) against the BACK PLATE (2).

3. Carefully pass the power supply (6&8) wires and the SUPPLY GROUND WIRE
   (5) through the center hole of the BACK PLATE (2). Secure the BACK PLATE (2) to the OUTLET BOX (1) with MOUNTING SCREWS (3).

4. Attach the BLACK SUPPLY WIRE (8) to the SMOOTH (or BLACK) FIXTURE LEAD WIRE (9) by using the WIRE CONNECTOR (10). At the same manner, attach the WHITE SUPPLY WIRE (6) to the RIBBED (or WHITE) FIXTURE LEAD WIRE (7). Loop the FIXTURE GROUND WIRE (4) around the GROUND SCREW (11) of the BACK PLATE (2). (Note: Be sure to provide an extra 3” length of the FIXTURE GROUND WIRE (4) for connection to the SUPPLY GROUND WIRE (5).) Tighten the GROUND SCREW (11). Connect the remaining FIXTURE GROUND WIRE (4) to the SUPPLY GROUND WIRE
   (5) using a WIRE CONNECTOR (10). Place wiring and connections inside the OUTLET BOX (1).

5. Place the COVER PLATE (14) onto the FIXTURE MOUNTING SCREWS (13), and secure it into place using the DECORATIVE NUTS(15) provided.

6. Slide the GLASS SHADE (17)over the SOCKET(16), secure with the SOCKET RING(18).

7. Screw light bulb into the socket and make sure it does not exceed the maximum wattage specified on the fixture’s wattage rating label.

INSTALLATION IS NOW COMPLETED

1. OUTLET BOX
2. BACK PLATE
3. MOUNTING SCREW
4. FIXTURE GROUND WIRE
5. SUPPLY GROUND WIRE
6. WHITE SUPPLY WIRE
7. RIBBED (OR WHITE) FIXTURE LEAD WIRE
8. BLACK SUPPLY WIRE
9. SMOOTH (OR BLACK) FIXTURE LEAD WIRE
10. WIRE CONNECTOR
11. GROUND SCREW
12. 5/32 HEX NUT
13. FIXTURE MOUNTING SCREW
14. COVER PLATE
15. DECORATIVE NUT
16. SOCKET
17. GLASS SHADE
18. SOCKET RING

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>