GTRACING AIR2 Bluetooth Earphones User Manual
- June 5, 2024
- GTRACING
Table of Contents
GTRACING AIR2 Bluetooth Earphones
DEAR CUSTOMER
Thank you for choosing CTRACINC. To further understand the product, please
read this instruction carofully before use. Providing you with quality
products and services is ur constant pursuit!
IMPORTANT SAFETY INSTRUCTIONS
Please read the instructions carefully before using this product and retain it for future reference.
HEARING SAFETY:
- DO NOT wear earphones with high volume for a long time to avoid damaging your hearing.
- Set the earphones to a low volume before you put them on, then increase the volume gradually as your preference.
- DO NOT set the volume too high to stay aware of your surroundings.
- Please refer to local laws and regulations if you want to answer phone calls via this device during driving.
- For your safety, avoid distractions from music or phone calls when you are driving or doing other activities with potential dangers.
Warning: Please set the volume to a proper level to avoid hearing damages.
CAUTION:
- DO NOT expose this product to high temperatures.
- DO NOT immerse the earphones into water or expose them to humidity for a long time.
- DO NOT clean the product with detergent containing alcohol, ammonia, benzene or abrasives.
- Avoid dropping.
- Place the earphones back into the charging case when not in use and keep it away from children and pets to avoid choking hazards. Unauthorized disassembly of any parts of this product is forbidden, which may cause a fire hazard, warranty avoidance, and/or property loss. Close attention is needed when using near children.
- Keep the charging case away from water, rain or any other liquid.
- DO NOT use the product in thunderstorms to avoid malfunction or electric shock.
- Always ask a professional technician or authorized personnel for repair.
BATTERY WARNING!
The product uses a lithium polymer battery. Improper usage may lead to the risk of fire or burn. Please use the charger only supplied by a qualified manufacturer (recommended output: voltage SV/current -SOOmA) or charge the product via a PC USB port. Charge it regularly if it is not used for a long time.
PACKAGE CONTENTS
- Bluetooth Stereo Earphones
- USB-C Charging Cable
- 6x Ear Tips (2 are equipped on the earphones)
- User Manual
PRODUCT DIAGRAM
- Charging Case
- Earphones
How To Use
-
Wear Your Earphones
Choose the ear tips
Ear tips with different sizes are included in the package, try all sizes and choose the ones fitting you best.
Wear the earbuds
Please wear the earphones correctly. -
Charging Charging the earphones
Put earphones into the charging case and close the cover. Connect the charging case via the USB-C charging cable to fully charge the earphones.
Note: While charging, the earphone led indicators are always red, and turn blue for 30s then turn off once fully charged View the@ battery level display to check the current battery status -
Bluetooth Pairing
-
Power on – (Auto-Sync)
Open the charging case, take out the earphones and will automatically get sync (pairing mode} without any manual operation and voice prompts:’ POWER ON”. The led indicators on both earphones flash alternately red and blue.
Power on – (Manual-Sync)
When the earphones are turned off, press and hold any one of the earphones for 3s and voice prompts:’ POWER ON”, they will connect each other automatically. The led indicators on both earphones flash alternately red and blue. -
Pare and Connect
2.1. Activate the Bluetooth function on your phone and search for wireless devices. Pair your phone to “GT RACING Air2′.
2.2. After successful pairing, voice will prompt:
“DING-DONG”. The indicator lights will flash blue once every5s. -
Power off
Press and hold any one of the earphones for Ss, don’t release your finger until the indicator light flashes red 3 times quickly, voice will prompt:”POWER OFF”. -
Reset Sync
If the earbuds don’t pare with the Bluetooth device or crash, press and hold the earphones again for 1 Os, don’t release your
finger until the indicator light flashes blue 3
times quickly, voice prompts: “POWER ON”
Note: Please hold your finger until blue light and ignore all other lights during the above process. -
Reconnect Bluetooth
-
Put the earphones back in the charging case and dose it;
-
Delete the “GT RACING Air2” in your Bluetooth device list;
-
Repeat the “Pare and Connect” in Bluetooth Pairing (Page 5);
Note: If the earphone indicator flashes red, do not connect Bluetooth, repeat step 1 and leave it for a longer time, or repeat ‘Reset Sync”(Page 6).
How To Operate?
Function| Operate| Voice Prompt| Indicator Light
Status
---|---|---|---
Power on
| 4) / (l)
click 1x + hold 3s
| ****
“Power on”
| 4)1(l)
Flash blue •3times
Power off
| 4) / (l)
click 1x + hold 5s
| ****
“Power off”
| 4)1(l)
Flash blue •3times
TWS Paring| 4) / (l)
Auto-Sync
| “Power on”| 4) / (l)
Alternate flash
red and blue••
Pare and Connect| Pair phone to
“GTRACING Air2”
| “Ding-dong”| 4)1(l)
Flash blue• everySsec
Disconnect| | ****
“Disconnected”
| (i)Alternateflash red and blue•• ()Flash blue• everySsec
Low battery| | “Low battery”| 4)1(l)
Flash Red•slowly
Charging| Via USB-C
Charging cable
| | 4)1(l)
Red •always on
Full Charge| | | 4)1(l)
blue•on 30sec
and then turnoff
Reset| 4) / (l)
click 1x + hold 10s
| | 4)/(l)
Flash blue• 3times
Remaining
battery
| Charging Case
View battery level
display
| |
How To Control?
Functions **Operation ** Voice Indicator light
Prompt **** Status
| C,i(i)
short dick 1x
| |
Flash blue• once
every5s
| C,
shortclick2x
|
| (i)
shortclick2x
|
| C,
shortclick3x
|
| (i)
shortclick3x
|
| C, i (i)
click 1x+ hold 2s
| “clink”
| C, i (i)
short click 1x
|
| C, i (i)
short dick 1x
|
| C, i (i)
click 1x + hold 2s
|
Connect2 calls
andswitchcaUs
| (Jli(i) ti =: 1?i t11calls|
Specifications
| Item | Specifications |
|---|
Bluetooth version
| ****
VS.3
Bluetooth frequency
| ****
2.402GHz-2.480GHz
Bluetooth profile
| HFP/A2DP/AVRCP/AVDTP
/GAP/SDP
Maximum working range
| ****
1OM ( without obstacle)
Battery capacity| 30mAh x 2(earphones);
350mA(charging case)
Charging time
| 50min(for earphones);
1.SH(for charging case via USB-C)
Playtime
| Up to 4 hours (varies by
volume level and audio content)
Input
| ****
DC SV
Operating environment
temperature
| ****
-10C-+55C
Standby time| ****
About 400H/90 Days
Warranty and Service
Dear customers:
Thank you for using our products. In accordance with the relevant provisions
of the Consumer Protection Law, our company will provide you with the
following services with this warranty card:
- All faults caused by the quality problems of the products themselves should be repaired free by our company with the completed warranty card, and the warranty period is 6 months from the date of purchase.
- Once the warranty card is altered, the warranty will become invalid immediately.
- Keep the warranty card as the warranty certificate of this machine. Please keep it properly.
No free maintenance is allowed for the following cases:
- Failure to provide warranty certificate.
- Faults caused by failing to operate the product as required by the instructions.
- Damage caused by non-company special maintenance personnel.
- Faults, scratches or damages caused by movement of fall.
- Damage caused by improper custody, maintenance and use of users.
- Damage caused by natural disasters.
Certificate
The company’s products are strictly in accordance with the various indicators
before leaving the factory, and are allowed to leave the factory.
Inspection number:. ____
User Warranty Certificate
(User saves and shows it to maintenance site during maintenance)
Product Name·|
Model·|
Place of Origin:|
Warranty period:|
Date of purchase|
Maintenance Record
Date of repair:|
Faults, maintenance
and treatment
|
Maintenance unit Maintenance man’s
signature:
Contact us·
Brand name: GTRACING
Website: www.gtracing.com
E-mail: info@gtracing.com
MADE IN CHINA
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.