standivarius Solo X Pad Wireless Combo Keyboard Instruction Manual
- June 10, 2024
- standivarius
Table of Contents
Solo X Pad Wireless Combo Keyboard
Instruction Manual
Wireless Mouse only
- Remove USB receiver from underside of mouse.
- Insert receiver into available laptop USB socket.
- Insert AA disposable or re-chargeable battery into compartment with polarity as indicated and replace cover.
- Your mouse is now connected.
As part of solo X / solo #pad wireless keyboard / mouse combo
- Remove USB receiver from underside of mouse and save for use later if you lose the unifying USB receiver.
- Obtain the unifying USB receiver from the keyboard tilt-strip accessory.
- Insert receiver into available laptop USB socket.
- Switch on keyboard using the switch on the right-hand edge.
- If the blue LED flashes press the Esc and K keys simultaneously and then release.
- Insert one AA disposable or rechargeable battery into mouse battery compartment with polarity as indicated and replace cover.
- Your keyboard and mouse are now connected.
Note:
If you lose the unifying mouse, then switch off keyboard, and remove mouse
battery.
Obtain original USB receiver supplied with mouse and insert into laptop and
repeat steps 3 to 7.
Auto power-save
These features will deactivate mouse and keyboard when not in use and removing
the USB receiver from your laptop will turn off the mouse and keyboard for
transportation.
standivarius
DMR Ergonomics SRL
Cale Circumvalatiuniinr 37 / 27
300671 Timisoara
Romania
UK: uk@standivarius.com / ++ 44 115 647 7406
Northern Europe (SE, FI, DK, NO)
nordics@standivarius.com / ++46 10 551 6270
Benelux (B, NL, L) :
benelux@standivarius.com / ++40 723 014912
DACH (D, A, CH) : dach@standivarius.com /
++40 728 160023
Other: offce@standivarius.com / ++40 728
160023
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>