baby trend PY86XXXB Deluxe Nursery Center Instruction Manual

baby trend PY86XXXB Deluxe Nursery Center

WARRANTY

DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND® FOR REPLACEMENT PARTS, SERVICE AND REPAIR.
The Baby Trend® warranty covers workmanship defects within 1 year of purchase.

Any product which has been subjected to misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration or accident, or has had its serial number altered or removed invalidates all claims against the manufacturer. Any damage to property during installation is the sole responsibility of the end user.
Customer Service Department can be contacted at 1 800-328-7363 Monday through Friday between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®. Please visit http://babytrend.com/pages/ limited-warranty for complete warranty details.

Baby Trend, Inc. 13048 Valley Blvd. Fontana CA 92335
1-800-328-7363 • (8:00am ~ 4:30pm PST)
www.babytrend.com

WARNING

WARNING: Failure to follow the instructions could result in serious injury or death.

WARNING: INFANTS CAN SUFFOCATE:

• In gaps between a mattress too small or too thick and product sides.
• On soft bedding
• NEVER add a mattress, pillow, comforter, or padding
• Use only the mattress provided by Baby Trend®.
• The playard mattress/pad is specially designed to prevent suffocation. The playard mattress/pad has a solid base, a certain length and width, and is less than one inch thick in order to meet safety standards. Using a thicker or a different sized mattress/pad may allow a child’s head to get between mattress/pad and the side of the playard causing suffocation.
• To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their back to sleep, unless otherwise advised by your physician.
• ALWAYS place child on back to sleep.
• NEVER use plastic shipping bags or other plastic film as mattress covers not sold and intended for that purpose. They can cause suffocation.
• NEVER use a water mattress with this product.

WARNING: STRANGULATION HAZARD:
WARNING: NEVER LEAVE INFANT IN PRODUCT WITH SIDES DOWN. Infant may roll into space between pad and loose mesh side causing suffocation.

• Strings can cause strangulation! NEVER place items with a string around a child’s neck such as hood strings or pacifier cords. NEVER suspend strings over playard or attach strings to toys.
• NEVER place the product near a window where cords from blinds or drapes can strangle a child.
• Child can become entrapped and die when improvised netting or covers are placed on top of a playard. Never add such items to confine child in playard.
• NEVER leave child in product with sides lowered. Be sure sides are raised and locked in position whenever child is in product.

WARNING: See playard floor and side rails for

warning.

• The playard, including side rails, must be fully erected prior to use.
• Make sure latches are secure.
• Discontinue use of the product when child is able to climb out or reaches the height of 35 in. (890 mm), or 30lb. (14kg).
• When child is able to pull to standing position, remove bumper pads, large toys and other objects that could serve as steps for climbing out.
• ALWAYS provide the supervision necessary for the continued safety of your child. When used for playing, never leave child unattended. Child in crib must be under supervision at all times.
• ALWAYS ensure that the playard, is safe by checking regularly, before placing the child in it, that every part is properly secured in place.
• NEVER leave the Full-size bassinet in place when child is in playard.
• Only one child can use the Playard/Nursery Center at any time.
• NEVER use this product if there are any loose or missing fasteners, loose joints, broken parts, or torn mesh/fabric. Check before assembly and periodically during use. Contact Baby Trend Customer Service at 1-800-328-7363 for replacement parts, repair or instructions. NEVER substitute parts.
• This product is not intended for commercial use.

PARTS

This model may not include some features shown below. Check the parts list on the back cover to make sure you have all the parts for this model before assembling the playard.

Type may vary

IMPORTANT !

• To ensure safe operation of your product, please follow these instructions carefully. Please keep these instructions for future reference.
• Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. NEVER use if any parts are missing or broken.
•  Adult assembly is required.

ASSEMBLY

TO ASSEMBLE PLAYARD

ATTENTION: Playard must be fully assembled and securely locked before installing or using other accessories.

1. Unzip bag and remove Playard frame (Fig. 1). Undo the fasten straps and set the Mattress aside.
   DO NOT push center down yet.

2. Top rails must be fully erected before lowering center. Pull up one rail at a time, hold one hand on each side of the rail and pull up sharply, do not pull from the middle where the center latch release is located, make sure both tubes latch in place and each rail is rigid (Fig. 2).
   IMPORTANT: The handle located in the center of the Playard floor MUST remain raised (Approx. 45.7 cm or 18 inches) while locking the side rails in place. If the center is not raised the rails will NOT lock.
   If you experience difficulty and one side of the rail will lock but the other side will not then, unlock the rail by squeezing the release in the center and try again.

3. Once all four (4) top rails are locked in place, push down on the center handle (Fig. 3a).
   The center mechanism will automatically lock in place.
   IMPORTANT: Test each top rail by pushing down slightly to confirm each is rigid and securely in place before use (Fig. 3b).

4. Place the Mattress on the floor of the Playard with the padded side facing up (Fig. 4).
   Coloque el colchón en el piso del corralito de juegos con el lado acolchado hacia arriba (Fig. 4).

5. Insert the hook and loop fastener located on the underside of the Mattress through the slots in the floor of each end of the Playard (Fig. 5a). Fasten the hook and loop straps to the underside of the Playard floor to prevent the Mattress from moving (Fig. 5b).

6. To operate the brakes on the Wheels,press downward on the brake levers. To release, lift upward on the lever (Fig. 6)
   FOLDING PLAYARD

7. Release the hook and loop fastener holding the Mattress from underneath the Playard floor or the Bassinet and set the mattress aside.

   • Do not unlock top rails yet, center of floor must be raised before top rails will unlock.
   • Rotate the center handle counter-clockwise 90 degrees and raise the center as high as the top rails (Fig. 7). Gather the Legs and Wheels together towards the center as close as possible so that they nearly touch.

8. Locate the rail latch release in the center and bottom side of each rail. Squeeze the lever with two hands until the rail releases the two tubes (Fig. 8a), then push down (Fig. 8b).
   NOTE: If the top rail(s) do not release completely, DO NOT FORCE! Lift the center of floor higher. Both tubes must be released for the top rail to fold.

9. Gather four (4) corners and center all together tightly (Fig. 9). Wrap Mattress around Playard frame with padded side facing inward.

10. Secure the hooks and loop straps by feeding them through the loops on the end of the Mattress and folding them back onto themselves (Fig. 10).
    Place folded Playard into carry bag so that the handle comes through the opening between each side of the zipper.

ACCESSORIES

Full-Size Bassinet & Cradles Warnings:

WARNING: Failure to follow these warnings and the instructions could result in serious injury or death.

FALL HAZARD: To help prevent falls, do not use this product when the infant begins to push up on hands and knees or has reached the height of 25 in. (635 mm), weight of 15 lb. (6.8 kg) or 3 months old, whichever comes first.

• ALWAYS check that the bassinet is securely locked on the base/stand by pulling upwards on the bassinet bed.
  SUFFOCATION HAZARD
  Infants have suffocated:

• In gaps between extra padding and side of the bassinet/cradle, and

• On soft bedding
  Use only the pad provided by Baby Trend®. NEVER add a pillow, comforter, or another mattress for padding.

• Strings can cause strangulation! DO NOT place items with a string around a child’s neck such as hood strings or pacifier cords. DO NOT suspend strings over the bassinet or attach strings to toys.

• NEVER use plastic shipping bags or other plastic films as mattress covers not sold and intended for that purpose. They can cause suffocation.

• Use bassinet with only one child at a time.

• NEVER place a child under the bassinet.

• The bassinet must be fully assembled and installed before using.

• The playard, including side rails, must be fully erected prior to use. Make sure each latch is secure.

• NEVER leave the bassinet in place when child is in playard.

• Discontinue use of full-size bassinet when child begins to push up on hands and knees or has reached the height of 25 in. (635 mm), weight of 15 lb. (6.8 kg) or 3 months old, whichever comes first.

• Only one child can use the Playard at any time.
  To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their back to sleep, unless otherwise advised by your physician.

• ALWAYS place child on back to sleep.

• ALWAYS provide the supervision necessary for the continued safety of your child. NEVER leave children unattended.

• If a sheet is used with the mattress/pad, use only the one provided by Baby Trend® or one specifically designed to fit the dimension of the playard mattress.

• ALWAYS provide the supervision necessary for the continued safety of your child. NEVER leave children unattended.

• Child can become entrapped and die when improvised netting or covers are placed on top of a playard. Never add such items to confine child in playard.

TO ASSEMBLE THE FULL-SIZE BASSINET

Full- Size Bassinet with metal support tubes

ATTENTION: Playard must be fully assembled and securely locked before installing or using the Full-size bassinet feature. (See To Assemble Playard section). You will need to remove the mattress from the bottom of the Playard to use inside your Full-size bassinet.

• Connect opposing Mattress Support Tubes that are attached to the bottom of the Bassinet (Fig. 11a).
• Before placing the Mattress into the Bassinet, make sure Mattress Support tubes are connected (Fig. 11b).
• Position the Bassinet over and down into the fully assembled Playard. Secure in place by pushing down firmly on each plastic support clip until all are snapped into place (Fig. 12).
• Place the Mattress into the Bassinet with the padded side facing upward (Fig. 13).

TO REMOVE THE FULL-SIZE BASSINET

• Remove Mattress from Bassinet. Disconnect opposing Mattress Support Tubes. Unsnap all clips and lift Bassinet.

DIAPER STACKER ASSEMBLY (if equipped)

Diaper Stacker

TYPE A

• Connect the Diaper Stacker to the Playard by sliding the two (2) connecting clips over an open portion of the top rail of the Playard (Fig. 14).
  NOTE: Diaper Stacker can only be installed on open sides of the Playard where the connecting clips can easily be attached without interfering with other features.

PREMIUM POCKET ORGANIZER (if equipped)

Premium Pocket Organizer

TYPE B

Connect the Premium Pocket Organizer to the Playard by sliding the two (2) connecting clips over an open portion of the top rail of the Playard (Fig. 15). NOTE: Premium Pocket Organizer can only be installed on open sides of the Playard where the connecting clips can easily be attached without interfering with other features.

ACCESSORIES
Warnings for Toy Accessories including Toybar / Mobile /Canopy with toys:

WARNING:

• Possible entanglement injury.
• Keep out of baby’s reach.
• Remove Toybar/Mobile/Canopy with toys when baby begins to push up on hands and knees. Recommended use from birth to 5 months.
• Toys are not intended to be mouthed by the baby and should be positioned clearly out of reach of the baby’s face and mouth.
• ALWAYS attach all provided fasteners (strings, straps, clamps, etc.) tightly to playard according to these instructions. Check frequently.
• Do not add additional strings or straps to attach to any other crib or playpen.
• The Toybar/Mobile/Canopy with toys is intended for visual stimulation and not to be grasped by the child.

MOBILE ASSEMBLY

ATTENTION:
A crib mobile is intended for visual stimulation and not to be grasped by the child. If attached to the crib or playpen, remove when baby begins to push up on hands and knees. Always attach all provided fasteners (strings, straps, clamps, etc.) tightly to a crib or playpen according to the instructions. Check frequently.
DO NOT add additional strings and straps to attach to a crib or playpen.

• Insert the Mobile Lower Arm (a) into the Mobile Arm Holder (b) until they lock together (Fig. 15).
• Insert the Mobile Upper Curved Arm (c) into the Mobile Lower Arm (a, b) until locked together (Fig. 16).
• Snap the Mobile Tri-shaped Arm (d) onto the end of the Upper Curved Arm  (a, b, c) (Fig. 17). Connect each of the three Toys (e) to the Mobile by threading the string into the slot at the end of each arm.
• Insert the bottom of the Mobile Arm into the frame of the Playard (Fig. 18).

Maintenance

MAINTENANCE AND CLEANING INSTRUCTIONS:
Use only household mild soap and warm water.
DO NOT USE BLEACH.
DO NOT MACHINE WASH.

BABY TREND® CUSTOMER SERVICE
The Customer Service Department can be contacted at 1 800-328-7363 Monday through Friday between
8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®.

References

• Limited Warranty Coverage – Baby Trend
• Baby Trend® | Car Seats, Strollers, High Chairs, Nursery and More!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>