Peiying PY-DVR011 Car DVR Owner’s Manual

PY-DVR011 Car DVR
Owner’s Manual Car DVR PY-DVR011

SAFETY INSTRUCTION

Read this instruction manual and keep it for future reference. Producer does not take responsibility for damages caused by inappropriate handling and use of the product.

• Protect this device from humidity, water and other liquid. Avoid using/ storing it in extreme temperatures. Do not expose it to direct sunlight and other sources of heat.
• This appliance may be used by children who are above 8 years old and by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they are supervised and guided by a person who is responsible for their safety in a cautious manner for all the safety precautions being understood and followed. Children should be supervised to ensure that they do not play with the appliance. Children should not perform cleaning and servicing of the device unsupervised.
• Keep the device out of the reach of children.
• Use only authorized accessories.
• Always disconnect the product from the power source before cleaning.
• Clean this device with a soft, slightly damp cloth. Do not use any chemical agents to clean this device.
• Do not attempt to repair this device yourself. In case of damage, contact authorized service point for check-up or repair.
• Turn off the device before ejecting SD card. Otherwise, data on the SD card may be damaged or removed.

PRODUCT DESCRIPTION

1. Speaker
2. LED indicator
3. Camera lens
4. Reset button
5. Display
6. Power indicator
7. Mini USB socket
8. Holder socket| 9. AV socket
10.MicroSD card slot
11.Mode button
12.Up button
13.Power button
14.Down button
15.Menu button
---|---

MOUNTING THE DEVICE

Dashcam:

1. Screw the holder thread into the camera holder socket and secure it with a nut that is on the thread itself.
2. Clean the mounting area (front windscreen) and hold the suction cup against the windscreen.
3. Plug one end of the car charger into the mini USB socket in the dashcam, plug another end into the vehicle’s cigarette lighter socket.

Note: Place the cable in a way, that it does not disturb the driver while driving.
Rear camera:
Before installation, choose the correct place for mounting. Mounting place has to be installed in a way, that it does not obstruct field of view. Rear camera can be installed in two ways:

• On mounting tape. Peel off first piece of paper from the tape and stick it to the camera’s mounting bracket. Peel off second piece of paper from the tape and stick the camera do selected place.
• On screws. Drill the holes in selected place and screw in the camera. During drilling make sure, that no damage is done to any wire, especially for safety systems.
  After connecting the 2,5 mm plug to the AV socket in the dashcam, the view from rear camera will appear in the top left corner of the display. If red wire will be connected to the reversing lights (for example with quick connector), after shifting into reverse gear, the view from rear camera will be enlarged, helping the driver with maneuvering the vehicle.

MICROSD CARD INSTALLATION

1. Place the microSD card in the proper slot of the device (with pins facing the lens) and press gently, until it clicks.
2. To take out the card, press it gently. When the card slides out of the slot, take it out.

Notes:

• The microSD card in the device will be treated as storage device. It is advised to format it first.
• Use microSD cards with class 10 or higher, with maximum capacity of 32 GB.

TURNING ON AND OFF

•  To turn on the device:
  • Press and hold the power button
  • If the dashcam is connected to the cigarette lighter socket, the camera will turn on automatically after ignition and start recording.
• To turn off the device:
  • Press and hold the power button
  • If the camera is connected to the cigarette lighter socket, after turning off the engine, the dashcam will turn off after 10 seconds.

NAVIGATING THE MENU

• Press the menu button to go to setting menu or to cancel selection.
• Press the power button to confirm options.
• Use the up and down buttons to navigate the menu.
• Press the mode button to switch between recording, taking pictures, and browsing files modes.

Recording

• If the microSD card is inserted and correctly formatted, the recording will start automatically after providing the power to the dashcam (from cigarette lighter socket or from USB port).
• To start or stop the recording press the power button, while in recording mode.
• Press the menu button to change the recording settings. Press the menu button to change the general settings.
• In order for camera to turn on and start recording after shake, turn on the Parking guard on (in the recording menu). Select the desired sensitivity of the function in the G-sensor menu.

Taking pictures

• To take a picture, while in the photography mode, press the power button.
• Press the menu button to change the picture taking settings. Press the menu button to change the general settings.

Browsing files

• Use the up and down buttons to switch between files.
• To play the video file press the power button. During playing the video, use the up and down buttons to control playing speed. Pressing the up  and down button again will change the playing speed.
• To delete or lock the file, press the menu button and select the option.

To change the dashcam settings, press the menu button again.
Dashcam settings

• LCD Brightness: set the time of automatic power off of the display (the camera will keep on working).
• Auto Power Off: set the time of automatic power off after idle (does not apply for recording).
• Frequency: change the frequency of the recordings.
• Beep sound: turn on or off keys sound.
• Language: change the displayed language.
• Date / time: changing date and time.
• TV system: select PAL or NTSC.
• Format: erase all data currently on the microSD card.
• Default settings: reset all settings to factory values.
• Version: displays current version of software.

 TROUBLESHOOTING

sufficient space.
Recording ending automatically| Use microSD card of class 10 or higher
“File error” during playing the video or picture| Error occurred during saving the file, please format the memory card.
Blurry picture| Clean the lens of the dashcam
Black screen during bright scenery| Set the Exposure setting to fit the scenery
Stripes on recording| Change the frequency settings
The device froze| Press the Reset button To do it, use thin object, for example, a paper clip

SPECIFICATION

• Display: 4″ (480 x 800 px)
• Chipset: GC1054
• Max. photo resolution: 12M (3840×3024 px)
• Lens: 130° wide angle lens
• Photo format: JPG
• Video resolution:
• Front camera: 1080p/30 fps, 720p/30 fps, VGA/30 fps
• Rear camera: VGA
• Video format: AVI
• Automatic recording after ignition
• Recording mode: loop recording
• Memory card reader: micro SD (max. 32 GB)
• USB port: mini USB
• Functions: motion detection, G-Sensor, taking photos, parking monitor, date and registration stamp, seamless recording
• Battery capacity: 300 mAh (Li-ion)
• Charging voltage: 5 V / 1 A
• Microphone
• Built-in speaker
• Weight: 110 g
• Dimensions: 110 x 60 x 34 mm
• In set: rear camera, holder with suction cup, car charger, user’s manual

Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
Made in China for Lechpol Electronics Leszek Sp.k., ul. Garwolińska 1, 08-400 Miętne.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>