Peiying PY-DVR002 Basic 2 inch Car DVR Owner’s Manual

PY-DVR002 Basic 2 inch Car DVR
Owner’s Manual

SAFETY INSTRUCTIONS

Read this instruction manual and keep it for future reference. Producer does not take responsibility for damages caused by inappropriate handling and use of the product.

• Protect this device from humidity, water and other liquid. Avoid using/storing it in extreme temperatures. Do not expose it to direct sunlight and other sources of heat.
• This appliance may be used by children who are above 8 years old and by persons with reduced physical, sensory or mental capabilities, or lack of experience and  knowledge, if they are supervised and guided by a person who is responsible for their safety in a cautious manner for all the safety precautions being understood and  followed. Children should be supervised to ensure that they do not play with the appliance. Children should not perform cleaning and servicing of the device unsupervised.
• Keep the device out of the reach of children.
• Use only authorized accessories.
• Always disconnect the product from the power source before cleaning.
• Clean this device with a soft, slightly damp cloth. Do not use any chemical agents to clean this device.
• Do not attempt to repair this device yourself. In case of damage, contact authorized service point for check-up or repair.
• Turn off the device before ejecting SD card. Otherwise, data on the SD card may be damaged or removed.

PRODUCT DESCRIPTION

MOUNTING THE DEVICE

1. Put the suction cup holder into the holder socket in the dashcam.
2. Clean the mounting area (front windscreen), hold the suction cup against the windscreen and lock the lever to secure it.
3. Plug one end of the car charger into the mini USB socket in the dashcam, plug another end into the vehicle’s cigarette lighter socket.
   Note: Place the cable in a way, that it does not disturb the driver while driving.

MicroSD card installation

1. Place the microSD card in the proper slot of the device (with pins facing the screen) and press gently, until it clicks.
2. To take out the card, press it gently. When the card slides out of the slot, take it out.
   Notes:
   • The microSD card in the device will be treated as storage device. It is advised to format it first.
   • Use microSD cards with class 10 or higher, with maximum capacity of 32 GB.

Turning on and off

• To turn on the device:
  ◦ Press and hold the power button
  ◦ If the dashcam is connected to the cigarette lighter socket, the camera will turn on automatically after ignition and start recording.

• To turn off the device:
  ◦ Press and hold the power button
  ◦ If the camera is connected to the cigarette lighter socket, after turning off the engine, the dashcam will turn off after 5 seconds.

Navigating the menu

• Press the M button to go to setting menu or to cancel selection. The settings menu consists of mode settings and general settings. To go to the general settings, press the M button again.
• Press the power button to confirm options.
• Use the up and down buttons to navigate the menu.
• Press and hold the M button to switch between recording, taking pictures, and browsing files modes.

Recording

• If the microSD card is inserted and correctly formatted, the recording will start automatically after providing the power to the dashcam (from cigarette lighter socket or  from USB port).
• To start or stop the recording press the power button, while in recording mode.
• Before starting the recording, press the up button to enable or disable voice recording (the crossed out microphone icon will appear on the screen).
• While recording, press the down button to turn on the LEDs on the front of the device.

Taking pictures

• To take a picture, while in the photography mode, press the power button.
• To change the photography mode settings, press the M button. To change the dashcam settings, press the M button again.

Browsing files

• Use the up and down buttons to switch between files.
• To play the video file press the power button.
• To delete a file, press the M button, and select Delete. To change the dashcam settings, press the M button again.

Dashcam settings

• Format: erase all data currently on the microSD card.
• Language: change the displayed language.
• LCD Brightness: set the time of automatic power off of the display (the camera will keep on working).
• Auto Power Off: set the time of automatic power off after idle (does not apply for recording).
• Reset: reset all settings to factory values. Reset procedure can also be performed by pressing the Reset button (slide a thin object into the slot, for example a paper clip).
• Frequency: change the frequency of the recordings.
• Date / time: changing date and time. After setting the year, press the power button to go to next setting (after setting minutes, press the power button to save the settings).
• USB: select camera mode after plugging it to a PC.
• Version: displays current version of software.

TROUBLESHOOTING

sufficient space.
Recording ending automatically| Use microSD card of class 10 or higher
“File error” during playing the video or picture| Error occurred during saving the file, please format the memory card.
Blurry picture| Clean the lens of the dashcam
Stripes on recording| Change the frequency settings
The device froze| Press the Reset button To do it, use thin object, for example, a paper clip

SPECIFICATION

• Display: 2″ (220 x 176 px)
• Lens: 120°
• Max. photo resolution: 3M (1920 x 1440 px)
• Photo format: JPG
• Video resolution: 720p/30 fps, VGA/30 fps
• Video format: AVI
• Automatic recording after ignition
• Recording mode: loop recording
• Memory card reader: micro SD (max. 32 GB)
• USB port: mini USB
• Functions: motion detection, taking photos, date stamp
• Battery capacity: 80 mAh (Li-ion)
• Charging voltage: 5 V / 0,3 A
• Microphone
• Built-in speaker
• Weight: 31 g
• Dimensions: 60 x 63 x 28 mm
• In set: holder with suction cup, car charger, user’s manual

Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should  not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal,  please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for  environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with  other commercial wastes for disposal.
Made in China for Lechpol Electronics Leszek Sp.k., ul. Garwolińska 1, 08-400 Miętne.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>