Peiying PY-DVR005 Car DVR Owner’s Manual
- June 4, 2024
- Peiying
Table of Contents
- Peiying PY-DVR005 Car DVR Owner’s Manual
- SAFETY INSTRUCTIONS
- PRODUCT DESCRIPTION
- MicroSD card installation
- Turning on and off
- Navigating the menu
- Recording
- Taking pictures
- Browsing files
- Connecting to the PC
- SPECIFICATION
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Peiying PY-DVR005 Car DVR Owner’s Manual
SAFETY INSTRUCTIONS
Read this instruction manual and keep it for future reference. Producer does not take responsibility for damages caused by inappropriate handling and use of the product.
- Protect this device from humidity, water and other liquid. Avoid using/ storing it in extreme temperatures. Do not expose it to direct sunlight and other sources of heat.
- This appliance may be used by children who are above 8 years old and by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they are supervised and guided by a person who is responsible for their safety in a cautious manner for all the safety precautions being understood and followed. Children should be supervised to ensure that they do not play with the appliance. Children should not perform cleaning and servicing of the device unsupervised.
- Keep the device out of the reach of children.
- Use only authorized accessories.
- Always disconnect the product from the power source before cleaning.
- Clean this device with a soft, slightly damp cloth. Do not use any chemical agents to clean this device.
- Do not attempt to repair this device yourself. In case of damage, contact authorized service point for check-up or repair.
- Turn off the device before ejecting SD card. Otherwise, data on the SD card may be damaged or removed.
PRODUCT DESCRIPTION
- Speaker
- IR sensors
- Camera lens
- Holder socket
- Micro USB socket
- AV socket
- Reset button
- MicroSD card slot
- Power button
- Up button
- Down button
- M button
MOUNTING THE DEVICE
- Put the suction cup holder into the holder socket in the dashcam.
- Clean the mounting area (front windscreen), hold the suction cup against the windscreen and lock the lever to secure it.
- Plug one end of the car charger into the mini USB socket in the dashcam, plug another end into the vehicle’s cigarette lighter socket.
Note: Place the cable in a way, that it does not disturb the driver while driving
MicroSD card installation
- Place the microSD card in the proper slot of the device (with pins facing the screen) and press gently, until it clicks.
- To take out the card, press it gently. When the card slides out of the slot, take it out.
Notes:
- The microSD card in the device will be treated as storage device. It is advised to format it first.
- Use microSD cards with class 10 or higher, with maximum capacity of 32 GB.
Turning on and off
-
To turn on the device:
◦ Press and hold the power button
◦ If the dashcam is connected to the cigarette lighter socket, the camera will turn on automatically after ignition and start recording. -
To turn off the device:
◦ Press and hold the power button
◦ If the camera is connected to the cigarette lighter socket, after turning off the engine, the dashcam will turn off after 5 seconds.
Navigating the menu
- Press the M button to go to setting menu or to cancel selection.
- Press the power button to confirm options.
- Use the up and down buttons to navigate the menu.
- Press and hold the M button to switch between recording, taking pictures, and browsing files modes.
Recording
- If the microSD card is inserted and correctly formatted, the recording will start automatically after providing the power to the dashcam (from cigarette lighter socket or from USB port).
- To start or stop the recording press the power button, while in recording mode.
- Press the M button to change recording and general settings.
- In order for camera to turn on and start recording after shake, turn on the Parking guard on (in the recording menu). Select the desired sensitivity of the function in the G-sensor menu.
- If a rear view camera (not included, sold separately) is connected to the AV socket, the preview will be shown on the display. To change the preview, press the up button.
Taking pictures
- To take a picture, while in the photography mode, press the power button.
- Press the M button to change picture settings.
Browsing files
- Use the up and down buttons to switch between files.
- To play the video file press the power button. While playing, press the up or down button to change the volume.
- To delete or lock the file, press the M button and select desired option.
To change the dashcam settings, press the M button again.
Dashcam settings
- Video resolution: change the recording resolution.
- Picture resolution: change the resolution of taken pictures.
- Clip length: change the duration of a single recorded clip.
- Motion detection: after enabling this option, the camera will start recording after detecting a motion in front.
- White balance: adjust white balance to current lighting conditions.
- Sharpness: adjust the sharpness of the recordings.
- EV: adjust brightness of the recordings.
- LCD Brightness: set the time of automatic power off of the display (the camera will keep on working).
- Auto Power Off: set the time of automatic power off after idle (does not apply for recording).
- Sound recording: enable or disable voice recording. After enabling, the crossed out microphone icon will appear on the display.
- Parking mode: use the parking function in combination with the Gsensor function. After shutting down, if the device detects a shake, it will turn on and start recording.
- G-sensor: adjusting sensitivity of the G-sensor function. If while recording, the device will detect a sudden shift, the recording will be locked from deleting or overwriting.
- Date / time: changing date and time.
- Language: change the displayed language.
- Date stamp: show date and time in recordings.
- Frequency: change the frequency of the recordings.
- Format: erase all data currently on the microSD card.
- Default settings: reset all settings to factory values.
- Version: displays current version of software.
Connecting to the PC
After connecting to the PC, the following options will appear:
- Mass storage: allows for browsing the files in the microSD card.
- PC camera: operating system will detect the dashcam as webcam.
- Recording mode: the dashcam will return to recording mode, while charging the battery.
Problem | Possible solution |
---|
Cannot record or take pictures
| Check if the card is locked and if it has sufficient space.
Recording ending automatically| Use microSD card of class 10 or higher
“File error” during playing the video or picture| Error occurred during saving
the file, please format the memory card.
Blurry picture| Clean the lens of the dashcam
Stripes on recording| Change the frequency settings
The device froze
| Press the Reset button To do it, use thin object, for example, a paper clip
SPECIFICATION
- Display: 2,4″ (240×320 px)
- Lens: 125°
- Max. photo resolution: 12M (4032 x 3024 px)
- Photo format: JPG
- Video resolution: 1080p/30 fps, 720p/30 fps, VGA/30 fps
- Video format: AVI
- Automatic recording after ignition
- Recording mode: loop recording
- Memory card reader: micro SD (max. 32 GB)
- USB port: mini USB
- Functions: motion detection, G-Sensor, taking photos, parking monitor, date stamp
- Battery capacity: 150 mAh (Li-ion)
- Charging voltage: 5 V / 1 A
- Microphone
- Built-in speaker
- Weight: 48 g
- Dimensions: 75 x 54 x 35 mm
- In set: holder with suction cup, car charger, user’s manual
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment) (Applicable in the European Union
and other European countries with separate collection systems) This marking
shown on the
product or its literature, indicates that it should not be disposed with other
household wastes at the end of its working life. To prevent possible harm to
the environment or human health from uncontrolled waste disposal, please
separate this from other types of wastes and recycle it responsibly to promote
the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they
can take this item for environmentally safe recycling. Business users should
contact their supplier and check the terms and conditions of the purchase
contract. This product should not be mixed with other commercial wastes for
disposal.
Made in China for Lechpol Electronics Leszek Sp.k., ul. Garwolińska 1, 08-400
Miętne.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>