Peiying PY0109 Car Monitor Owner’s Manual
- June 4, 2024
- Peiying
Table of Contents
Peiying PY0109 Car Monitor
SAFETY INSTRUCTIONS
Please read this operation instruction carefully before use, and keep it for future reference. Producer does not take responsibility for damages or injuries caused by inappropriate handling / use / installation of the product.
- Make sure to perform connections when the vehicle engine is turned off.
- Protect this device from water, humidity and other liquids. Avoid using/storing it in extreme temperatures. Do not expose this product to direct sunlight, heat sources, or use near strong magnetic fields. Do not handle this appliance with wet hands.
- It is suggested that all connections and mounting should be carried out by qualified personnel.
- Make sure all the connections are executed in a proper manner. Improper connection may cause damage.
- Keep away from flammable materials!
- Do not attempt to repair this appliance yourself. In case of damage, contact authorized service point for check-up/repair.
- Any modifications on the vehicle in order to mount this device or any other components have to be performed in a way that do not threaten security nor stability of the vehicle.
- It is forbidden to mount any components near air bags!
- In case of any doubts concerning place of installation, contact your vehicle’s dealer. During installation keep in mind, that any loose parts may pose danger in case of an accident – make sure to install every piece properly to ensure safety.
Safe driving
Keep in mind that responsibility for safety while operating a vehicle is solely on the driver of the vehicle. The monitor is intended as a supplement tool and CANNOT be considered as a device dismissing the driver from cautious vehicle operation. It is intended to assist in safe driving. The device does NOT allow for not exercising special caution while driving! The producer of this device does not claim liability for any misuse of the product nor damages or accidents resulting from failure to observe these precautions or safety instructions.
PRODUCT DESCRIPTION
- Monitor
- Power supply input (red)
- Video V1 input (yellow)
- Video V2 input (white)
MOUNTING
- Execute all connections before connecting the device to power supply. Power off the car engine first.
- Connect the power (+12 V) to power supply input (5,5/2,5 socket).
- Connect V1 (yellow cinch) to the front view camera.
- Connect V2 (white cinch) to the rearview camera.
- The monitor should be located in a place that does not obstruct driver’s view, nor where it could disturb operation of the safety systems of the vehicle. Make sure to mount the monitor firmly (use the double-sided adhesive tape).
- Turn on the vehicle’s engine. The view from the camera will be displayed on the monitor. Please note, the V2 channel has the priority. When connected as instructed above, the monitor will display view from the front view camera; switch on reverse gear to display the rearview camera image.
SPECIFICATION
- Display: 5” TFT (16:9 color)
- Resolution: 480 x 272 px RGB
- Brightness: 300 cd / m2
- Contrast: 350:1
- System TV: PAL / NTSC (auto switching)
- Video inputs: 2 channels (auto switching)
- Power: 5 W
- Power consumption: =< 3 W
- Stand-by power consumption: =< 0,5 W
- Casing material: ABS
- Operation temperature: -30ºC ~ +80ºC
- Power supply: 12 – 24 V DC
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate
collection systems) This marking shown on the product or its literature,
indicates that it should not be disposed with other household wastes at the
end of its working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate this from other types
of wastes and recycle it responsibly to promote the sustainable reuse of
material resources. Household users should contact either the retailer where
they purchased this product, or their local government office, for details of
where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed with
other commercial wastes for disposal.
Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k., ul. Garwolińska 1, 08-400 Miętne.
