Peiying URZ0466 Car FM Transmitter with Bluetooth Function Owner’s Manual

CAR FM TRANSMITTER
WITH BLUETOOTH FUNCTION
URZ0466
OWNER’S MANUAL

SAFETY INSTRUCTIONS

Read this instruction manual carefully before use, and keep it for future reference. The producer does not claim liability for inappropriate use and handling

1. Protect this product from moisture, humidity, water, and any other liquid. Avoid using/storing it in extreme temperatures. Do not expose it to direct sunlight and sources of heat.
2. Use only authorized accessories.
3. Do not use this device if it has been damaged or its operation is abnormal.
4. Do not attempt to repair this device yourself. In case of damage, contact an authorized service point for a check-up/ repair.
5. ALWAYS disconnect the device from power supply before cleaning.
6. Clean this device with a soft, slightly damp cloth. Do not use any abrasives or chemical agents to clean this product.

PRODUCT DESCRIPTION

1.  USB port 1 (charging and music streaming)
2. USB port 2 (charging)
3. Microphone
4. LED display
5. Previous track
6. Multifunction knob (call management, music control, volume adjustment, frequency setting)
7. Next track
8. microSD card slot

OPERATION

Answer/end
a call| Press the knob
Reject a call| Press the knob twice
Redial last
number| Press the knob twice
Play/Pause| Press the knob
Adjust volume| Rotate the sal. knob right to increase the volume
Rotate the knob left to decrease the volume
Set frequency| Press and hold the knob until digits on the display start flashing; rotate the knob right/ left to increase/decrease the frequency
Select a track| Press and button to go to the previous/next track
---|---
Select mode| Press and hold the knob to switch between available modes (microSD card, USB, Bluetooth)
Detect
voltage| Press and hold the **** button to display the car voltage

FM TRANSMITTER

1. Plug the FM transmitter into your vehicle’s cigarette lighter or power socket.
2. Tune your radio to the desired FM frequency, then match the same frequency of the FM transmitter. To do this, first press and hold the knob until the frequency starts flashing.  Then rotate the knob to set the desired frequency.
3. Insert a USB flash drive to a USB port 1 or insert a microSD card into the microSD card slot. The device will play and transmit music files automatically.
   Notes:
   • Only USB port 1 can serve as a USB flash drive reader.
   • The maximum capacity of the USB flash drive and microSD card is 64 GB.

BLUETOOTH

1. Enable the Bluetooth function on the external device and search for new Bluetooth devices.
2. Select and connect with this device (URZ0466). Enter password “0000” if necessary.
3. When there is an incoming call in the music playing mode, the device will automatically switch to the call.

CHARGING

1. Make sure the FM transmitter is connected to the cigarette lighter socket in your vehicle.
2. Insert one end of the USB cable into the micro USB port of the mobile device; insert the other end into USB port 2 of the  FM transmitter.
3. Charging starts automatically.

SPECIFICATION

Bluetooth 4.2
Bluetooth range: up to 10 m
Bluetooth profiles: AVRCP, HFP, A2DP
2x USB ports:
USB 1 – charging and music streaming
USB 2 – charging MicroSD card slot (max 64 GB)
Music format: MP3, WMA
LED display Built-in microphone Call management Voltage tester

Output voltage:
USB 1 – 5 V / 1 A
USB 2 – 5 V / 2,1 A
Frequency range: 87,5 – 108 MHz
Frequency stability: ±10 ppm
Power supply: 12 – 24 V

Lechpol Electronics Leszek Sp.k. hereby declares that the Car FM transmitter with Bluetooth function URZ0466 is consistent with directive 2014/53/UE.
The full text of the EU Declaration of Conformity is available at the following Internet address: www.lechpol.pl.

Correct Disposal of This
Product
(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or Its literature indicates that It should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal.

Made in China
for Lechpol Electronics Leszek Sp.k., ul.
Garwolińska 1, 08-400 Miętne.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>