Peiying URZ0478 Car FM Transmitter with Bluetooth Function Owner’s Manual
- June 9, 2024
- Peiying
Table of Contents
Peiying URZ0478 Car FM Transmitter with Bluetooth Function
SAFETY INSTRUCTIONS
Read this instruction manual carefully before use, and keep it for future reference. Producer does not claim liability for inappropriate use and handling.
- Protect this product from moisture, humidity, water and any other liquid. Avoid using/storing it in extreme temperatures. Do not expose it to direct sunlight and sources of heat.
- Use only authorized accessories.
- Do not use this device if it has been damaged or its operation is abnormal.
- Do not attempt to repair this device yourself. In case of damage, contact with an authorized service point for check-up/repair.
- ALWAYS disconnect the device from power supply before cleaning.
Clean this device with soft, slightly damp cloth. Do not use any abrasives or chemical agents to clean this product.
PRODUCT DESCRIPTION
- USB 1 port (charging and playing music)
- Microphone
- Previous track
- Multifunction knob (call management, music control, volume adjustment, frequency setting)
- Next track
- BASS function button
- USB 2 port (QC 3.0 charging)
- Changing the light mode / Siri button
- MicroSD card slot
OPERATION
| Function | FM transmitter |
|---|---|
| Answer/end a call | Press knob |
| Reject a call | During an incoming call, press the knob two times |
| Redial last number | Press knob twice |
| Play / Pause | Press knob |
| Adjust volume | Rotate the knob right to increase volume Rotate the knob left |
to decrease volume
Set frequency| Press and hold knob for 3 seconds until digits on the display
start flashing; rotate the knob right/left to increase / decrease the
frequency
Select a track| Press and button to go to the previous / next track
BASS function button| Press the BASS button on the unit.
RGB change / Siri function| Press the backlight button to change the backlight
mode. A long press of this button activates the Siri function.
Mode switch| Press and hold the next song button to change the play source
between USB / Memory stick / Bluetooth.
---|---
Voltage detection| Press and hold the
function| previous track button
| to check the current
| battery voltage.
FM TRANSMITTER
- Plug the FM transmitter into your vehicle’s cigarette lighter or power socket.
- Tune your radio to a desired FM frequency, then match the same frequency of the FM transmitter. To do this, first press and hold for about 3 seconds until the frequency starts flashing. Then rotate the knob to set the desired frequency.
- Insert a USB flash drive to a USB port 1 or insert a microSD card into microSD card slot. The device will play and transmit music files automatically.
Notes:
- Only USB port 1 can serve as a USB flash drive reader.
- The maximum capacity of the USB flash drive and microSD card is 64 GB.
BLUETOOTH
- Enable Bluetooth function on the external device and search for new Bluetooth devices.
- Select and connect with this device (URZ0478). Enter password “0000” if necessary.
- When there is an incoming call in the music playing mode, the device will automatically switch to the call.
CHARGING
- Make sure the FM transmitter is connected to the cigarette lighter socket in your vehicle.
- Insert one end of the USB cable (not included) into USB port of the mobile phone; insert the other end into USB port 2 of the FM transmitter.
- Charging starts automatically.
SPECIFICATIONS
-
Bluetooth 5.0
-
Bluetooth range: up to 10 m
-
Bluetooth profiles: EDR, HSP, HFP, A2DP, AVRCP, AVCTP, AVDTP, SPP, SMP, ATT, GAP, GATT, RFCOMM, SDP, 12CAP
2x USB ports: -
USB 1 – charging and music streaming
-
USB 2 – charging microSD card slot (max 64 GB)
-
Music format: MP3, WMA, WAC, FLAC
-
LED display: 0,75”
BASS function
- Built-in microphone
- Call management
Output voltage:
- USB 1 – 5 V / 2,4 A
- USB 2 – QC 3.0 – 5 V / 3 A, 9 V / 2 A, 12 V / 1,5 A
- Frequency range: 87,5 – 108 MHz
- Power supply: 12 – 24 V
In set: user’s manual
Lechpol Electronics Leszek Sp.k. hereby declares that Car FM transmitter with Bluetooth function URZ0478 is consistent with directive 2014/53/UE. Full text of the EU Declaration of Conformity is available at following Internet address: www.lechpol.pl.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate
collection systems) This marking shown on the product or Its literature,
indicates that It should not be disposed with other household wastes at the
end of its working life. To prevent possible harm lo the environment or human
health from uncontrolled waste disposal, please separate this from other types
of wastes and recycle it responsibly to promote the sustainable reuse of
material resources. Household users should contact either the retailer where
they purchased this product, or their local government office, for details of
where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract This product should not be mixed with
other commercial wastes for disposal.
Made in China for LECHPOL ELECTRONICS Leszek Sp.k., ul. Garwolińska 1, 08-400
Miętne.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>