Deerma DX700S Vacuum Cleaner Instruction Manual

Thank you for choosing vertical Deerma Vacuum Cleaner!
Please read this manual carefully before starting operation.

Product overview

Product components

1. On and off button
2. Power cord
3. Main body
4. HEPA filter
5. Filter cloth
6. Dust collector
7. Cord holder
8. Extension tube
9. Brush
10. Narrow nozzle
11. Brush with a round nose
12. Air brush *

Note:

1. Technical characteristics and appearance of the product may differ, the real product has priority.
2. The air brush is not included, it can be purchased separately.

Operation of the product

1. Remove the dust collector, check the filtration components and put the dust collector back.
2. Install the extension tube and brush or the required nozzle.
3. Turn on the device, perform cleaning and turn off the device.
4. After use, clean the dust container and store the vacuum cleaner.

Note: the device can be used without an extension tube, for this install the necessary brush or nozzle in the corresponding groove on the body.

Cleaning and maintenance

1. Take out the dust collector, pull out the HEPA filter and the filter mesh, rinse with water and dry naturally. It is recommended to wash the HEPA filter at least once a month.
2. If the hair is wound on the roller of the air brush*, remove the brush, press the special button and remove the roller for cleaning.
3. Remove the hair along the axis of the roller, rinse it with clean water and dry it naturally, then install it back.

Additional Information

1. Before cleaning the product, make sure that the power of the device is turned off;
2. If the device is not used for a long time, it should be stored in a dark, cool and dry place. Do not place the device under direct sunlight or in a humid environment;
3. Do not disassemble and repair the device yourself;
4. For cleaning, the device should be wiped using a dry wrung out cloth. Do not use gasoline, alcohol, thinner or other chemicals, otherwise cracking or discoloration of the case is possible;
5. To ensure the best cleaning result and long service life of the electric motor, you should clean the dust collector and dust filter in a timely manner. In case of damage, the filter should be replaced immediately;
6. The filter can be washed with water. Before installation in the device, it is necessary to make sure that it is completely dry (Avoid drying in the sun), otherwise it may have a detrimental effect on performance;
7. After use, brushes may retain hair or dust accumulations and other large contaminants that should be removed immediately for best cleaning results.

Troubleshooting

Before troubleshooting, turn off the power source and remove the plug from the outlet.

cools down
Contamination of brushes| Clean the brushes from contamination
Contamination of the filter| Clean or replace the filter
The motor of the vacuum cleaner does not work| Check whether the power plug is correctly installed in the outlet
The device stopped working unexpectedly| Turn off the device, disconnect the power plug, clean the dust collector of debris. Wait for the engine to cool down.

Safety notes

1. Before starting to use the device, carefully read the contents of this manual. Assembly of the device should be carried out in accordance with the given order;
2. Use of the device other than in accordance with this manual may result in damage or personal injury.
3. Before turning on the power, make sure that the nominal power supply voltage meets the requirements indicated on the device nameplate (220V, 50 Hz);
4. The product is suitable for use in homes, hotels, educational institutions and other closed spaces, it should not be used to remove industrial or metal waste and dust;
5. The product is not intended for use by persons with impaired physical or cognitive functions, as well as persons without the necessary knowledge and experience (including children), except for cases of use under the supervision of another person capable of ensuring their safety;
6. The device should not be used in potentially dangerous environments, such as car gas stations, fuel and lubricant storage facilities, chemical industry enterprises and other explosive and fire-hazardous places;
7. To avoid risks or damage to the device, it should not be used to clean laser printer toner, as well as inks and color pigments used in printers;
8. To avoid deformation and damage to the body of the device, do not place it directly on or near sources of high temperature, such as ovens and fireplaces;
9. The device should not be used for suction of hightemperature objects, dangerous substances (acids, alkalis, corrosive or chemically active substances), finely dispersed substances (stone dust, cement, coal dust) and flammable substances (cement, kerosene, diesel fuel, paint, alcohol) etc.);
10. During use, if there is an abnormal sound from the electric motor or an abnormally high temperature of the air from the blowing hole, you should immediately stop using the device and contact the after-sales service center;
11. In case of damage to the power cable or problems in the operation of the device, you should not carry out independent disassembly. In this case, you should immediately stop using the device and contact the after-sales service center.

Disclaimer

This user manual is published by Rumik brand store. Changes or corrections may be made to this user manual due to typographical errors, inaccuracies of current information, or software and hardware improvements at any time and without notice. All  illustrations are for demonstration purposes only and may not accurately represent the actual device.

Specifications

Наименование: Deerma Vacuum Cleaner
Name: Deerma Vacuum Cleaner
Model: DX700/DX700S
Dimensions: 260 x 288 x 1123 mm
Weight: 2.2 kg
Nominal power: 600 W
Dust collector capacity: 0.8 l
Pressure: up to 15 kPa
Noise level: up to 75 dB
Input parameters: 220V ~50 Hz

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>