August EPA25 Bluetooth Hat User Manual

August EPA25 Bluetooth Hat

Safety Instructions

Thank you for purchasing this August Audio product. You may be very familiar with similar products, but please take the time to read the instruction manual carefully. It ensures <let you familiarize yourself with the features and get the best listening experience.

Security

Please read the safety instructions before using <las product. It is for your safety and the safety of those around you. Please never open the product yourself. This can be dangerous and will also void the manufacturer’s warranty.

Disposal

When disposing of electronic items, please observe the WEEE (Waste Electrical and Electronic Equipment) regulations and any other disposal regulations in your country. – If necessary, check this with your responsible environmental authority.

Declaration of Conformity

The declaration of conformity can be found on the following website: http://augustint.com/en/declaration/

customer service

If you have any questions, please contact our customer service:
Tel : +49 (0) 511 9781 2978
Email : service-de@augustint.com

Storage and Use

Maintenance

Please remove the Bluetooth headphones from this device before washing, this can be done through the Earphone access slot ( see chapter 4. Part Names and Functions).
Refer to the product care label for washing instructions

Main Features

• Wireless Headset for Bluetooth Devices
• Hands-Free Calls with Integrated Microphone
• Built-in Rechargeable Battery
• Micro USB Charging Port
• Range: up to l0m (Class II)
• Working time : up to 20 hours.
• Bluetooth Version V5

Box Contents

Part Names and Functions

1. Volume down/previous track
2. Enter (Power ON OFF/pause/phone answer/hang up/re-dial)
3. Volume up/next track
4. Power socket
5. Earphone access

Operations

Switch On / Off

To switch the device on, press and hold the Enter button until the device chimes. When on, the status LED flashes blue.
To switch the device off. press and hold the Enter button for 3
seconds, until the device chimes. The status LED will flash red then turn off.

Bluetooth connections

To pair to a device, turn the EPA25/30 off, then press and hold the Enter button for 7 seconds to enter paring mode. Whilst in paring mode, the status LED flashes red and blue. If required, the password for pairing is: 0000

For Mobile Phones

1. Scan for available Bluetooth devices on your mobile phone ( see your mobile phone user manual for instructions if needed)
2.  Select ”EPA25/30″ from the available devices and confirm the connection.
3. The status LED will flash blue to indicate a successful connection.

Note: Accessing Bluetooth settings on mobile phones varies for each phone, to find the information for your phone, please refer to its user manual.

For computers

1. Turn on your computer’s Bluetooth function.
2. Select “Settings” in Control Panel and click “Device”, there you can turn on Bluetooth to search for new devices.
3. When the scan is complete, select “EPA25/30” from the list of results. The drivers for the EPA2/30 will be installed automatically.
4. Note : A separate Bluetooth driver is required for Windows XP and Vista (not included).
5. The status LED will double flash every second while the device is paired.
6. To enable sound playback via the EPA25/30, select “Sound settings” in the control panel, then click EPA25/30 and select “Set as default”. All audio signals are now played back via the EPA25/30.

Note : The EPA25/30 will automatically attempt a connection with the last connected device after it was powered on.

Music Playback Control

• The EPA25/30 can control music playback played by the connected device (mobile phone or computer).
• Press ” “to pause or resume playback.
• Long press “-” or “+” to control the volume. When the maximum volume is reached, a warning tone sounds.
• Just hold “-” or “+” for a short time to go to the previous or next track.
  Note: The music control works with devices that support the Bluetooth profile A2DP. Please check the user manual of your mobile phone for compatibility with A2DP.

Handsfree

• While connected to your mobile phone, the EPA25/30 can be used as a hands-free device for calls.
• Press “ ” to answer or hang up calls.
• Press “ ” twice to redial.

Loading

Connect the EPA25/30 to a charging USB port using the supplied USB charging cable. During charging, the power LED lights up red and changes to blue once the battery is fully charged.

Specification

Troubleshooting

10 meters from the device.
Can’t install the driver for EPA25/30 on a computer.| Update the driver of the Bluetooth module on your computer.
The sound quality is intermittent in Bluetooth mode.| Disable the Wi-Fi on your source device.
No sound.| Check the volume on both

the source device and the EPA25/30.

---|---
The earphones do not align with my ears| Wear the hat so that the left side earphone is where you want it, then carefully move the right earphone within the hat band to where it needs to go by gently pressing and squeezing along an edge of the earphone.

Warranty

This product is guaranteed for twelve months from the date of the original purchase. In the unlikely event of any defect arising due to faulty materials or workmanship, the unit will be either replaced or repaired free of charge (where possible) during this period. An alternative product will be offered incase the product is no longer available or repairable.

This warranty is subject to the following conditions:

• The warranty is only valid within the country where the product is purchased.
• The product must be correctly installed and operated in accordance to the instructions given in this user manual.
• The product must be used solely for domestic purposes.
• The warranty only covers the main unit, and does not cover the accessories.
• The warranty does not cover the damage caused by misuse, negligence, accident and natural disaster.
• The warranty will be rendered invalid if the product is resold or has been damaged by inexpert repairs. The manufactures disclaim any liability for incidental or consequential damages.
• Please consult our customer adviser before returning any product; we are not responsible for any unexpected product returns.
• Any faulty product must be kept and returned in the original packaging with all the accessories and the original copy of the purchase receipt.

The warranty is in addition to, and does not diminish, your statutory or legal rights.

Customer Service

Telephone: +44 (0) 845 250 0586
Email:service-de@augustint.com

This product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The Declaration of conformity may be consulted on1ine at http://www.augustint.com/en/declaration

Industry Canada Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept interference, including interference that may cause undesired operation of the device.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

No Unauthorized Modifications: Do not make any changes or modifications to this product without the prior express written approval of August International Ltd. Any changes or modifications made without express written approval could void the user’s authority to operate this product.
For details of further relevant technical standards, please contact us at the address above.

Thank you for purchasing the August EPA25/30 Bluetooth Hat. This user manual is designed to familiarize you with all the features of this device. Please take time to read this user manual carefully, even if you are already familiar with a similar product.

Safety
To ensure your safety and the safety of others, please ensure you read the Safety Instructions before using this device. Please do not disassemble the EPA25/30 electronic device, it can be unsafe and will invalidate the manufacturer’s warranty.

Disposal

Please ensure the product and accessories are disposed ofin compliance with the WEEE (Waste Electrical and Electronic Equipment) Directive and any other regulations in your country. Always check with the environment agency and relevant authorities for disposal regulations.

Declaration of Conformity
The Declaration of Conformity can be found on our website at http://augustint.com/en/declaration/

Customer Service
You can contact us by phone on: +44 (0) 845 250 0586 or by email at: service@augustint.com should you require technical support or customer service.

August International Ltd Rawmec Business Park Hoddesdon
United Kingdom
Tel: +44(0) 845 250 0586
EU Distributor:
Daffodil Germany GmbH Bayernstr. 10
D-30855 Langen hagen Germany
Tel: +49 (0) 511 97812978
www.augustint.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>