August AUG-SL05-M01-G01 Wi-Fi Smart Lock User Manual
- June 3, 2024
- August
Table of Contents
August AUG-SL05-M01-G01 Wi-Fi Smart Lock
Specifications
- ITEM DIMENSIONS LXWXH: 2.8 x 2.8 x 2.75 inches
- ITEM WEIGHT: 0.4 Pounds
- SPECIAL FEATURE: Wi-Fi, No Hub Needed, Biometric Verification
- LOCK TYPE: Biometric, Smart Lock, Retrofit Lock (works with your deadbolt)
- FINISH TYPE: Matte Black
- CONTROLLER TYPE: Vera, Amazon Alexa
- SHAPE: Round
- BATTERIES: 2 CR123A batteries
- BRAND: August Home
Introduction
With the August Wi-Fi Smart Lock (4th Generation) and August app, you can lock or unlock your door remotely, monitor the status of your door, give virtual guest keys, and stay aware of who is coming and going at all times. The August Wi-Fi Smart Lock is connected right out of the box and attaches to your existing deadbolt so you can maintain your original keys. It is simple to install.
Inside the box
- August Wi-Fi Smart Lock (4th gen)
- DoorSense® sensor
- CR123 batteries
- Lock adapter & mounting hardware*
- Tape
What you need
- Phillips Screwdriver
- August App for iOS or Android
- iOS or Android smartphone
- Wi-Fi internet connection
- (802.11 b/g/n 2.4GHz)
Door Compatibility
The August Wi-Fi Smart Lock is comaptible with most single-cylinder deadbolts.
To learn more go to https://support.august.com/deadbolt-compatibility-list- rkzJDLyR_G
Installation
Prepare your existing deadbolt
Place the supplied adhesive strip to hold the keyed side of the lock in place. Be sure to press down the tape against the keyhole when you install the smart lock on the inside of the door.
Remove your existing thumbturn
Use a Philips Screwdriver to remove your existing thumbturn. Be sure to unlock your deadbolt before removing the thumbturn entirely. If your deadbolt has a back plate, remove that as well.
Prepare the Mounting plate
The included Mounting Plate has two adjustable screw-holes that can be repositioned as needed. Use the two screws from the thumbturn, and insert it through the screw-holes.
Optional: Determine if you need the Cover Plate
For oversized deadbolt holes, an optional cover plate is included with your smart lock. If your smart lock’s mounting plate does not fully cover the hole left by the removed thumbturn, you may want to use the included Cover Plate.
Attach the Mounting Plate
- If using the optional Cover Plate, place it over the deadbolt hole.
- Take note of the DOOR SIDE and UP arrow.
- Pass the mounting plate screws through the larger opening in the Cover Plate, taking note of the UP arrow.
- Tighten the screws until the mounting plate is settled securely against the door.
Choose your adapter
Select your adapter from the Compatibility Chart. If your lock brand is not in the chart, slide each adapter onto the tailpiece to find the right one. The correct adapter will have one of the teeth pointing up.
Attach the adapter
Place the adapter onto the tail piece. One of the triangle shaped teeth should be facing up if you have the correct adapter. Make sure the non teeth side of the adapter goes in through the tail piece first.
Rotate to unlocked position and open wing latches
Rotate the thumbturn on your August Smart Lock all the way to the unlocked position, which may take some moderate force. The direction you turn will depend on which side of the door your deadbolt is on.
Attach the August Smart Lock
Before placing the August Smart Lock on the door, ensure the thumbturn is in the correct unlocked position. Slide the smart lock over the tailpiece and attach it to the mounting plate.
To secure the smart lock, clamp down both side wing latches to the mounting plate completely.
Make sure the back of the lock is flush with the door, and the lock is able to lock and unlock the deadbolt manually by rotating the outer shell.
Remove the faceplate
Press down on the August logo located at the bottom of the face plate. Grab the top of the faceplate and remove it.
Remove the battery tab
While holding the batteries in place, remove the plastic battery isolation tab. Make sure that the battery is properly seated in its compartment.
Reattach the faceplate
Place the faceplate back onto the smart lock, with the August logo at the bottom
Install
DoorSense ®
DoorSense® enables your lock to know when the door is open and closed. For instructions visit this support page:
https://support.august.com/what-is-doorsensetm-Hk4vL1A_z
Use the August
Home App to complete setup
Download the free August App from the App Store or Google Play Store. Create an account.
From the menu, tap “Set up a device.” Then tap “Set up a smart lock” and choose “WI-FI SMART LOCK 4TH GENERATION.”
Tap “Start” and then tap “Continue, my device is installed.” The app will then begin the process of connecting to your Smart Lock.
Frequently Asked Questions
Does this lock function when there is no wifi connection?
To make the preceding response clearer. You COULDN’T remotely control it if there was no WiFi. Bluetooth connection is only used for near proximity.
Does the August app need to be open in order to unlock the lock, or will it do so automatically when the phone is near the lock using bluetooth?
I’ll elaborate on the other response. Mine is set to unlock automatically when I go home. For a while, it was operating flawlessly and would automatically unlock when I got home. After that, it ceased to do so. I continued reading the app’s instructions. It was stated that in order for the August app to learn your behaviours, you should use it at least once every day. I therefore lock the door using the app before I leave for work in the morning. It has been functioning continually ever since.
How far away from the entrance may the keypad be?
To my understanding, the August WiFi does not include a keypad. The operations of the remote are controlled via a phone app. The outside of the door has a keyed lock.
Will this take the place of a dedicated dead bolt or will I need to drill a new hole for the position of the dead bolt?
The deadbolt is changed from the inside. August will then function as an automated system, but a key will still be required to access the building. Neither did I drill.
Can the door be manually opened from the inside?
Yes, you can lock or unlock the door by just grabbing the August unit’s outer ring.
Can you lock the door so that the key won’t work to open it?
No. The door can still be opened by anyone who has the appropriate key. Only the section of the lock set positioned on the interior is replaced with this lock.
Does the fourth generation lock require a separate purchase of the connector?
No, it has everything you require.
Is my key still valid if the Wi-Fi isn’t functioning properly?
Yes, the inside key lock remains the same; hence, the original key still functions.
Do visitors need to download an app in order to enter without a key or keypad?
The guest would need to install the app to open the lock if you did not purchase the add-on keypad. An automated text message with a link to the app’s download will be sent when you add a guest.
Why does the black cost more?
The WiFi variant is available only in black. The WiFi variant is more recent, more affordable, and smaller than the Bluetooth ones!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>