LOD JSP2060 ARMOR LITE Series Jeep Jt Armor Lite Skid Plate Pair Installation Guide
- June 13, 2024
- LOD
Table of Contents
LOD JSP2060 ARMOR LITE Series Jeep Jt Armor Lite Skid Plate Pair
WEB LINK: http://lodoffroad.com/assets/pdfs/JSP2060 JT Armor Lite Skid Plate Pair.pdf
INSTALLATION INSTRUCTIONS
VERIFY YOU HAVE ALL THE COMPONENTS BEFORE STARTING THE INSTALLATION. REFER TO THE ENGINEERING DRAWINGS AT THE END OF THIS DOCUMENT FOR A COMPLETE PARTS LIST
Loosely assemble the supplied Flat Head Screw, washer and T-Nut into all 4
positions on the Armor Lite Skid Plate as shown.
Position the Skid Plate on the Armor Lite Slider so the T-Nuts are inserted
into the T-Slot on the bottom of the Slider.
Using a Allen wrench, turn each Flat Head Screw 90° clockwise so that the
shoulder on the T-Nut catches on the T-Slot as shown below.
With the T-Nut in this position, you will be able to fully tighten the Flat
Head Screws.
The Skid Plate should now be able to hang loosely on the bottom of the Slider.
Position the Skid Plate forward or backward as needed to center it on the
bottom of the Slider, then fully tighten each screw equally.
| ITEM NO. | PART NUMBER | DESCRIPTION | QTY. |
|---|---|---|---|
| 1 | 2JSP2060-01 | JT ROCK SLIDER SKID PLATE 4DR | 2 |
| 2 | FHSCS142008CZ | FHSCS 1/4-20 X .50 CZ | 8 |
| 3 | TN2520-1 | T-NUT 1/4-20, DROP IN, ZINC PLATE | 8 |
| 4 | FW2512ZP | FLAT WASHER Ø1/4″ X .75 ZINC PLATE | 8 |
| UNLESS OTHERWISE SPECIFIED: | NAME | DATE | LOD LLC. |
|---|
DIMENSIONS ARE IN INCHES TOLERANCES: ±0.010
ANGULAR: MACH ±1°
TWO PLACE DECIMAL :±0.015
THREE PLACE DECIMAL ±0.005
| DRAWN| MCH| 5/13/2020
CHECKED| | | DESCRIPTION:
JEEP JT 4DR ARMOR LITE SKID PLATE
ENG APPR.| |
MFG APPR.| |
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF LOD LLC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF LOD LLC IS PROHIBITED.
| MATERIAL:N/A| DWG. NO. JSP2060 JSP2061| REV
B
FINISH: SEE NOTES
ECO: 1067| SCALE: 1:6| SHEET SIZE: B| SHEET 1 OF 1
Instruction Booklet
PARTS
JT INDICATOR
Maintenance
- Periodically check and re-tighten all fasteners.
- Periodically check your Armor Lite Skid Plate for scratches or dings which
can happen over time or after heavy use or highway driving. It is important to address these areas as soon as possible to prevent flaking and corrosion or rust from spreading. We recommend using Rustoleum© brand Black Semi-Gloss Protective Enamel (oil based). Remove loose powder coating, sand the area and clean using alcohol. Apply using a foam brush by dabbing to match the powder coat texture.
PARTS
1/4-20 X .50” FLAT HEAD CAP SCREW
(94222)
(x8)
DROP IN T-NUT 1/4-20
(0961746) (13120)
**(x8)
**
WASHER Ø1/4” X .75
(33004)
**(x8)
**
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>