VICSEED CTVK54 Holder Bike Phone Holder Instruction Manual
- June 14, 2024
- vicseed
Table of Contents
CTVK54 Holder Bike Phone Holder
Instruction Manual
Specifications
| Product Name | Bike Phone Holder |
|---|---|
| Model | CTVK54 |
| Applicable Places | Bicycle, Motorcycles, Baby Strollers, etc. |
Phone Holder
Compatibility| 4.7- 6.8 inch smartphones (thickness s1 5mm )
Package List| Bike Phone Holder x1, Bicycle Clip x1, User Guide x1
The parameters above are derived from the laboratory of VICSEED. The actual parameters may differ from product to product or other factors. All images shown here are for reference only.
OVERVIEW
Installation Steps
- Unscrew and remove the fixed nut from the phone holder.
- Put the fixed nut on the connecting ball of the handlebar clamp (the connecting ball must face the side with small opening)
- Align the round hole on the back of the phone holder with the connecting ball and push firmly, and tighten the fixed nut.
- Loosen the adjusting screw and open the jaws of the handlebar clamp to the width of the handlebar.
- Install the handlebar clamp on the bicycle handle, and tighten the adjusting screw to fix the bracket.
Using Steps
- Turn the lock catch to OPEN.
- Hold the phone against the bottom clamp arm and press down firmly. The upper clamp arms will automatically open and lock the phone.
- Turn the lock catch to the lock status to secure the phone.
- According to the needs of use, you can rotate the phone 360°; turn up or down, left or right, horizontal or vertical to adjust the mobile phone viewing angle.
- The phone holder has a charging port at the bottom, which is convenient for managing the charging cable when plugging in.
- After using, turn the lock catch to the unlock status, press down the mobile phone firmly to open the bracket and take out your mobile phone.
Attentions
- Please make sure the mount is installed steadily to avoid the phone falling on the bump riding.
- Please do not disassemble.
- Please install the phone mount in a suitable place before Starting your journey. Do not operate and adjust the phone mount while riding.
- Please take off the phone holder clamp while not in use. Avoid long time exposure to the sun or rain, in case shorten its working life.
- Keep the product away from children.
Customer Service
12-month limited warranty
Lifetime technical support
[email protected]
****www.vicseed.com
Any questions, Please feel free to contact us. Fix issue within 24 hours.
SCAN THE CODE TO WATCH USING VIDEO
http://v.vicseed.com/38/
SHENZHEN HOMGMI TECHNOLOGY CO., LTD.
Add: RM1503, BLK C, Shanta Technology BLDG,
Minho Avenue,Minzhi ST, Longhead DIST, Shenzhen, China
Shenzhen Hommix Technology Co., Ltd. All Rights Reserved.
Made in China