Fanvil H2U-V2 10SIP Dial Keys Hotel Phone Installation Guide

**Fanvil H2U-V2 10SIP Dial Keys Hotel Phone Installation Guide

**

Putting a call on hold

1. Press key, caller is put on hold.
2. To retrieve the call press key.

Speed dial

1. Configure speed dial on web page (Number keys 0-9).
2. Long press the corresponding number key to achieve speed dial

Phonebook

1. Add speed dial contacts on webpage.

Regulatory Compliance Federal Communication Commission (FCC) — USA This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US: 3I1IPNANH2UV2. If requested, this number must be provided to the telephone company.

Packaging list

Keys features

 Hold key, Hold/Resume the call

 Hands-free key Activate/deactivate hands free

 Mute key, with red color LED In idle mode: ringer off In communication mode: mute/un-mute a call

 Volume +/- key In idle mode or during ringing: increase or decrease ringer volume In communication: increase or decrease earpiece, headset or hands-free volume

 Message waiting indicator, with two-color LED

 Redial key, Access to redial the last record

 DSS Key, It can be set as function key/speed dial key, etc.

Installation the device

Please follow the instructions in below picture to install the device.

Wall mounting（without screws and screw anchors）

1. Drill two holes in the wall, the vertical distance between the two holes is 136.2 or 161.2mm;

2. Drive in 2 screw anchors and screws in turn;
   Note：5mm is reserved between the screw cap and the wall for easy installation of the phone base.

3. Connect the Ethernet cord, handset cord and power;

4. Align the wall mounting holes on the base with the screws made in step 2, slide down to complete the installation

Connecting to the Device

Please connect power adapter, network, and handset to the corresponding ports as described in below picture.

1.  Power port: connect the power adapter.
2. Network port: connecting local area network or internet.
3. Handset port: connect IP Phone handset.

Configuration

Configuration via Web

1.  Get the IP：Long press key, the IP Phone will report the IP address by itself.
2. Login: Input the IP address in the web browser. The PC and phone should be in the same IP address segment (The default username and password are both ‘admin’.)
3. Configure: Select network/account etc, and fill the relevant content.
4. Save the configuration.

Making a call

1. Direct dialing: lift the handset and enter the phone number,press key .
2. Hands-free: enter phone number press key and press or vice versa.

Accepting a call

1. Using the handset: pick up the handset.
2. Using the handsfree: pick up the handset, and press

Redial

1. Press key, redial a call number.

Call Mute

1. Press to Mute the microphone during the call.
2. Press again to un-mute the conversation.

References

• Fanvil Technology Co., Ltd

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>