CDWTPS Windshield Wiper Blades Installation Guide
- June 1, 2024
- CDWTPS
Table of Contents
CDWTPS Windshield Wiper Blades
Packaging Accessories Display
The image shows the packaging accessories for wiper blades, which include:
- A wiper blade held in a person’s hand with a yellow cover attached to the blade.
- A box packaging for the wiper blades.
- A small stall block.
- An installation manual booklet.
Attention: Be sure to remove the yellow cover before using.
Specifications
| Item | Description |
|---|---|
| Wiper Blades | 2 pieces per package |
| Stall Block | 1 piece included for installation aid |
| Yellow Cover | Protective cover, to be removed before installation |
| Manual | Installation instructions included |
Installation Instructions
#1 & #2 Connector Installation
Instructions for installing the wiper blade using connector #1 (16mm) or #2 (19mm):
- Select connector #1 or #2 based on size.
- Press down to install the connector on the adapter.
- Align the blade with the arm and slide into position.
- Click into the arm to ensure the blade is locked in position.
Reminder: Put your arm inside the stall block to avoid damaging the windshield when removing the old blade and installing the new one.
#3 Connector Installation
Instructions for installing the wiper blade using connector #3:
- Select connector #3 and press down to install on the adapter.
- Push two butterfly retainers together.
- Slide the new blade onto the arm.
- Optionally, click butterfly retainers into recess tabs under the arm.
Reminder: Use the stall block as instructed previously to protect the windshield.
#4 Connector Installation
Instructions for installing the wiper blade using connector #4:
- Rotate to remove the old wiper blade.
- Select connector #4 and press down to install on the adapter.
- Insert the wiper arm cylinder in the direction of the arrow.
- Rotate the wiper blade and install parallel to the arm on the adapter.
- For 17mm arms, snap the hook into the slot to complete the installation.
- For 22mm arms, snap the hook onto the outer bar to complete the installation.
Reminder: Use the stall block as instructed previously to protect the windshield.
FAQ
Q: How do I know which connector to use for my vehicle?
A: The type of connector depends on the size of your vehicle's wiper arm. Connector #1 is for 16mm, #2 for 19mm, #3 is a different style, and #4 is for 17mm or 22mm arms.
Q: What is the purpose of the yellow cover on the wiper blade?
A: The yellow cover is a protective cover for the blade and must be removed before installation.
Q: Can I install the wiper blade without the stall block?
A: It's recommended to use the stall block to prevent damage to your windshield during the removal of the old blade and installation of the new one.
Q: What should I do if the wiper blade does not lock into position?
A: Ensure that you have selected the correct connector for your wiper arm and that you have followed the installation steps correctly. If the issue persists, consult the manual or contact customer support.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>