YEELIGHT V1 Pro LED Desk Lamp User Manual

YEELIGHT V1 Pro LED Desk Lamp

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

Product Description

When the desk lamp is in the normal working position and the illuminating area is horizontal, the vertical distance between the area and the work surface is 435mm.

Setup Instruction

Base version

1.  Take out the base from the package and fix it with screws.
2.  Insert the power cord into the power port and power on the lamp.
3.  Tap the ON/OFF button to turn on the desk lamp.

Clamp version

1.  Fasten the clamp to the table as shown in the figure and tighten the lamp arm.
2.  Plug into the adaptor and power on the lamp.
3.  Tap the ON/OFF button to turn on the desk lamp.

Functionalities

1.  ON/OF Button: Tap: turn on/off the desk lamp
   Press for 2s: The light flashes and the lamp is into Timer mode. The lamp will automatically turn off after 15 minutes by default. (*Timer setting is in Yeelight App.)

2.  Time Management Mode button: Press 2s to turn on/off the time management mode. The default working time is 30 minutes. After that time, the lamp will flash to remind you to rest. You can set the timing in Yeelight App.

3.  Auto-sensing Mode button: Press 2s to turn on / off the automatic light-sensing function.

   • When green indicator is on indicates that the external ambient light is suitable for reading and writing.

   • When red indicator is on indicates that the external ambient light is not suitable for reading and writing.
     Note: Colour temperature and brightness cannot be adjusted under Auto- sensing Mode.

   • It is easy to cause eye fatigue in a dark or bright environment.

4. Brightness / Colour Temperature Slide Bar: Exit the auto-sensing mode and slide the bar to adjust the brightness or color temperature. Simultaneously press the Time Management Mode button and Auto-sensing Mode button for 5s, and the lamp will flash and automatically turn to 4000K.

Lamp Body Adjustment

When the shaft is loose, please use a proper coin or other tools to tighten it.

Intelligent Control

1.  Search Yeelight App in the app store or scan the QR code below to download and install the Yeelight App.
2.  Make sure the lamp is powered on, open Yeelight App, and follow the prompts to connect.

Please make sure the Wi-Fi network is available and can access the Internet normally (this product does not support 5G network).

Apple Homekit Control

1.  Open the Home app in your iPhone or iPad.
2.  Click the “+” button and add an accessory as per the prompts in the app. Scan the QR code on the right or under the product base. Alternatively, input the 8-digit code shown above the QR code to complete the access.
   • Make sure the Wi-Fi network is available and you can get access to the internet properly. This product is not compatible with 5G network.
   •  To ensure proper Homekit compatibility, it is recommended to use iOS 9 or above.
   •  HomeKit codes are indicated under the base of the controller. Please be noted that HomeKit codes are required to reset every time.
3. Apple is the trademark of Apple LLC.
   Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standard. HomeKit is a trademark of Apple Inc., registered in the U.S. and other countries.
   To control this HomeKit-enabled accessory, the latest version of iOS or iPadOS is recommended.

How to Reset

Simultaneously press the Time Management Mode button and Auto-sensing Mode button for 5s till the lamp flashes. Then, release the button and connect the lamp to the Yeelight App or Apple HomeKit.

•  The valid time is the connection is within 10 mins.
•  The lamp is used in a new network, it is a must to reset the lamp before intelligent control.

Specifications

Features

Warnings

•  Using adapters other than the original one may cause product damage or safety hazards.
•  The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similarly qualified person.
•  The light will produce heat during operation. Please keep proper ventilation.
•  The device is not waterproof.
•  Do not tilt the lamp but the place is smooth.
•  When adjusting the lamp angle, do not put your fingers into the connecting rod of the lamp arm in case of any possible injuries.
•  It is recommended to adjust the lamp color temperature below 4000K at night.
•  Not suitable for mounting on tubular material.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase. The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

•  Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
•  Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
•  Natural wear and aging of consumables or components during use (such as batteries, etc.).
•  Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
•  If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity
Qingdao Yeelink Information Technology Co., Ltd. hereby declares that the Yeelight Smart LED Filament Bulb is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following address: Yeelight Germany GmbH, Flurweg 11, 82402 Seeshaupt.

WEEE
This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

References

• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.sk – rýchly a pohodlný nákup odkiaľkoľvek | alza.sk
• Alza | Alza.co.uk
• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.cz
• alza.de
• alza.hu
• alza.sk

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>