yeelight YLDP03YL LED Bulb User Manual
- June 5, 2024
- Yeelight
Table of Contents
yeelight YLDP03YL LED Bulb
Installation Steps
-
Installing the Light Bulb
Install the light bulb and turn on the power. -
Note: Make sure that the power is off when installing, removing, or examining the light bulb.
-
Do not use this product in a lamp with a dimmer (e.g. a desk lamp with a round dimmer switch) to avoid damaging the product.
-
Do not use this product in a damp environment.
-
sing this light bulb in a narrow and ill-ventilated lamp shade is not recommended as this may cause weak signals or heat dissipation issues.
-
Download the Mobile Client
Search Yeelight in an app store or scan the QR code below to download the Yeelight mobile client. -
Run the mobile client
Open the app and operate it in accordance with the instructions provided in the app.- Make sure that your Wi-Fi connection is working and you can connect to the Internet. ]\
Product Features
- Brightness control
- 16 million colors
- Temperature adjustment
- Mood transformation
- Night light mode
- Timer switch
- Delayed switch-off
- Mobile control
- Firmware upgrade
How to Restore to Factory Settings
Use the light switch to turn the light bulb on and off five times (on for two
seconds, off for two vseconds.) The light bulb will display a circling multi-
colored effect, then automatically reset itself and display a white light
after five seconds. This shows that the light bulb has been restored to its
factory settings.
List of Functional Faults
Functional Faults
| Light bulb does not come on when connected to power
---|---
Light bulb blinks abnormally
A lack of color or unable to change color
Problems with the light bulb preventing the app from connecting to or
controlling it
A malfunction that affects use or safety due to a compromised product
structure (other than those caused by a user)
Warning
-
Before using this product, please make sure that your voltage is appropriate for this product’s working voltage. Using this product with a voltage other than the one specified may damage the product and cause safety hazards.
-
Do not disassemble this product, as the light diodes can cause damage to the eyes.
-
The light bulb will heat up when working.
Do not use it in a confined holder for an extended period of time. Ensure sufficient ventilation for the light bulb to allow for heat dissipation. -
The optical radiation of this LED light product complies with the “Exemptions and Requirements” of IEC 62471-2006.
-
For indoor use only.
-
Risk of electronic shock. Disconnect power before installation.
-
Do not use where directly exposed to water.
-
Do not use with dimmers.
-
The light source of this product is unchangeable light diodes(LED).
FCC Compliance Statement
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Please read this guide carefully before using the product
Manufacturer: Qingdao Yeelink Information Technology Co., Ltd. Address: F10-B4, Bldg B, International Innovation Park, #1 Keyuanwei Rd, Laoshan District, Qingdao City Website: www.yeelight.com
Customer Service Email Address: support@yeelight.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>