YEELIGHT YLCT03YL Staria Bedside Lamp Pro User Manual
- June 6, 2024
- Yeelight
Table of Contents
YEELIGHT YLCT03YL Staria Bedside Lamp Pro
Product Description
Installation
Plug the adaptor connector into the DC ternimal, then connect the power.
Instructions
ON/OFF button
More features
Night mode Set your own night mode in the app. The lamp will turn on automatically with cozy nightlight during the preset night mode period. If not in the preset period, the lamp will return to the default state saved in the APP. * The Night Mode is off by default. Please activate it in Yeelight APP.
Wireless charging
- The wireless charging indicator will flash 3 times when the lamp is connected to the power supply with its original adaptor.
- Put the mobile phone in the wireless charging area. The mobile phone is charging when yellow indicator light is on. If not, please adjust the phone to proper position.
- When the phone is fully charged, the yellow indicator light is off and the wireless charging terminates.
Wireless charging indicator status
- Power on: the indicator flashes 3 times
- Charging: indicator on
- Charging completed or not charging: indicator off
- Error warning: the indicator flashes quickly
- Foreign object: the indicator flashes quickly
Apple HomeKit Smart Control
- Open the Home APP in your iPhone or iPad.
- Tap “Add Accessories” and follow the instructions in the app to scan the QR code in the user manual or on the product base, or enter the 8-digit setup code above the QR code to grant the Apple Home app access.
- Make sure the Wi-Fi network is available and you can get access to the internet normally. This product is not compatible with 5G network.
- To ensure proper Homekit compatibility, it is recommended to use iOS 9 or above;
- HomeKit codes are indicated under the base of the lamp. Please be noted that HomeKit codes are required for reset every time.
- Apple is the trademark of Apple LLC.
How to Reset
Tap and hold the ON/OFF button, and re-insert the adaptor connector into the DC terminal till the light is breathing, and then release the ON/OFF button. * Please reset the lamp before using it in a new network environment.
Basic Parameters
- Name: Yeelight Staria Bedside Lamp Pro
- Rated input: 100 -240V~50/60Hz 0.45A
- Rated Power: 18W(Wireless Charging Module+LED modules)
- CRI: Ra95
- Input: 12V 1.5A
- Power factor: 0.5
- Wireless connection: Wi-Fi IEEE 802.11 b/g/n 2.4GhZ
- FCC ID: 2ABEU-YLCT03YL
- Contains FCC ID: 2AC7Z-ESPWROOM32D
Product Features
- Adjustable color temperature
- Adjustable brightness
- Cozy nightlight
- Foreign object detection
- Voice control
- Personalized schedule
- Smart timer
- 10W fast
- charging
Warnings
- Check the voltage before using the product. Improper voltage may damage the product and cause potential safety hazards.
- The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
- The light will produce heat during operation. Please keep proper ventilation.
- Using adapters other than the original one may cause product damage or safety hazards.
- Do not tilt the lamp but place it smoothly. potential safety hazard.
- For household use only.
- Class III Luminaire.
- All the pictures shown in this manual are for reference only.
FCC Federal Communications Commission
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To satisfy FCC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended. Limited by local law regulations, version for North America does not have region selection option.
EU Declaration of Conformity Hereby, Qingdao Yeelink Information Technology Co., Ltd., declares that the radio equipment type YLCT03YL is in compliance with Directive 2014/53/EU.
WEEE Disposal and Recycling Information All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>