YEELIGHT W3 Smart Light Bulb User Manual
- June 4, 2024
- Yeelight
Table of Contents
Yeelight Smart LED Bulb W3
Tunable White
User Manual
Installation and Steps
01 Install the bulb
Install the bulb and turn on the power.
Notes:
- Make sure that the power is off when installing, removing, or examining the light bulb.
- Do not use this product in a lamp with a dimmer (e.g. a desk lamp with a round dimmer switch) to avoid damaging the product.
- Do not use this product in a damp environment.
- Do not use the light bulb in a narrow and ill-ventilated lamp shade as it may cause weak signals or heat dissipation issues.
Connect to Yeelight App
This product can be controlled on Yeelight App and be configured to interact
with other Yeelight products.
Download App
Search for “Yeelight” in an App store or scan the QR code on the right to
download and install the App.
http://www.yeelight.com/ctd/download
Add Device
- Go to the Yeelight App homepage, and click “+” in the upper right corner to add your device.
- Proceed with the configuration as instructed on the App.
- Once you’ve added a device successfully, you can find it in the Device List.
Note: The operation procedure may differ from what’s described here due to App updates. Please proceed as instructed on the App. This product can also be controlled on Mi home, Google Home App, and Amazon Alexa. You can download and install one of these Apps from an App store, and configure your device as instructed on the App. After you have finished the configuration, you can use the App to control the light.
How to Restore to Factory Settings
Use the switch to turn the light bulb on and off five times (on for two
seconds and off for two seconds). The light bulb will start to dim and
brighten alternately and automatically change to white light with full
brightness after five seconds. This indicates that light bulb has been
restored to its factory settings.
Specification
Model: YLDP006
Lamp Fiting: E26
Rated Power: 8 W
Luminous Flux: 900 lumens
Rated Input:
120V 60Hz 0.07A
Color Temperature Range: 2700 K-6500 K
Wireless Connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4 GHz
Service Life: Approx. 15,000 h
Operating Temperature: -10℃ to 40℃
Operating Humidity: 0‒85% RH
Dimensions: φ60 × 118 mm
FCC ID: 2ABEU-YLDP006
Product Features
|
---|---
Adjustable brightness| Smart interaction
|
Firmware upgrade| Smart scenarios
Warning
- Please make sure that the voltage you use is suitable for the operating voltage of this product before use. Using inappropriate voltage may damage the product and pose a safety hazard.
- Do not disassemble the product without permission.
- The bulb will heat during operation. Do not use this product for a long time in the closed lampshade. Please make sure that the bulb
- For indoor use only.
- Please disconnect the power before installation to avoid electric shock.
- Use in Dry Locations only.
- Only use the instructions to control this lamp. This lamp will not operate properly when connected to a standard dimmer or dimming control.
- The light source of this product is irreplaceable (LED).
- This product can neither be used in emergency exits nor emergency lighting.
- For lamps for which they are a replacement, attention should be drawn to the fact that the increased weight may reduce the mechanical stability of certain luminaires and lamp holders and may impair contact-making and lamp retention.
- Under normal use of conditions, this equipment should be kept
a separation distance of at least 20cm between the antenna and
the body of the user.
FCC Compliance Statement
Any charges granted of this device could void the user’s authority to operate
the device.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: 1) This device may not cause harmful
interference, and 2) This device must accept any interference received,
including interference that may cause undesired operation.）
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Manufacturer: Qingdao Yeelink Information Technology Co., Ltd.
Address: 10F-B4, Building B, Qingdao International Innovation Park,
No.1 Keyuan Weiyi Road, Laoshan District, Qingdao City, Shandong
Province, P.R.China
Website: www.yeelight.com
Customer Service Email: support@yeelight.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>