YEELIGHT YLYK01YL BT Remote Control User Manual

: June 4, 2024
: Yeelight

Table of Contents

YEELIGHT YLYK01YL BT Remote Control
Specifications
Functions
Instructions
Safety Precaution
FCC Compliance Statement
EU Declaration of Conformity
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

YEELIGHT YLYK01YL BT Remote Control

Specifications

Model : YLYK01YL
Battery model : CR2032
Wireless connectivity : Bluetooth 5.0 BLE
Operating temperature : -10 ~ 40°C
Operating humidity : 0-85% RH
Operating Frequency : 2402–2480 MHz
Maximum Output Power : 6.41 dBm(for Europe);
Maximum Output Power: 6.25 dBm(for America)
FCC ID : 2ABEU-YLYK01YL

Functions

YEELIGHT-YLYK01YL-BT-Remote-Control-FIG-1

Instructions

Installing the battery
Remove the battery cover and install the CR2032 battery. Return the battery cover to its initial position

YEELIGHT-YLYK01YL-BT-Remote-Control-FIG-2

Note : Battery is not included. Battery model must be CR2032.

Pairing
Keep the remote control and the device as close as possible and make sure no obstructions between them. Press remote control’s OFF and M button in 60 secs after the device is turned on. The blinking of remote control indicator indicates that it is pairing, and the flashing of the device light indicates that the pairing is completed.

Unpairing
Open app, find and tap the device on the home page, and then tap Set-> Remote Control. Press and hold to unpair the remote control.

Safety Precaution

If the battery level is low, replace with a new battery.
It may cause a potential safety hazard if other battery models are applied.
Children should only use this product under adult supervision to prevent the cell battery from being swallowed.
Remove the battery when the remote control left unused for a long time.
Do not ingest battery, Chemical Burn Hazard
If the coin / button cell battery is swallowed, it can cause severeinternal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the productand keep it away from children.If you think batteries might have been swallowed or placed inside any partof the body, seek immediate medical attention.

FCC Compliance Statement

Any changes or modifications not expressly approved by the grantee of this device could void the user sauthority to operate the device. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interterence received, including interterence that my cause undesired operation.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Ihese limits are designed to provide reasonable protection against harmful interference in a residential installation. I his equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful harmful interterence to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment of and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorientor relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit difterent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician tor help.

EU Declaration of Conformity

Hereby, Qingdao Yeelink Information Technology Co., Ltd., declares that the radio equipment type YLYK01YL is in compliance with Directive 2014/53/EU.

WEEE Disposal and Recycling
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.