DAEMA DWD-1001BC 10kg Auto Tumble Dryer Instruction Manual
- June 3, 2024
- DAEMA
Table of Contents
DAEMA DWD-1001BC 10kg Auto Tumble Dryer
Before using your tumble dryer, please read this manual carefully and keep it for future reference.
The appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by a utility.
Please keep this manual in a safe place
Thanks for buying this new Beautiful Cat electronic clothes dryer
Specifications
Safety Information
- Unique and luxury design: The design is according to the front-loading washing machine with a unique appearance.
- Micro Control: Simple and convenient operation with the help of a PCB board, and it will feel the temperature when drying automatically.
- Big-size door window: See the procedure of drying clearly through this window.
- Open the door 180 °: It is very convenient to put in and out clothes with a 180°angle opening range.
- Compact instruction: Big capacity and unique outlook with anti-dust, anti-humidity, anti-shake, long life, and low noise design.
- The tumble dryer is not to be used if industrial chemicals have been used for cleaning.
- The lint trap has to be cleaned frequently.
- Lint must not to be allowed to accumulate around the tumble dryer.
- Adequate ventilation has to be provided to avoid the back flow of gases into the room from appliances burning other fuels, including open fires.
- Do not dry unwashed items in the tumble dryer.
- Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes, and wax removers should be washed in hot water with an extra amount of detergent before being dried in the tumble dryer.
- Items such as foam rubber(latex foam), shower caps, waterproof textiles, rubber-backed articles, and clothes or pillows fitted with foam rubber pads should not be dried in the tumble dryer.
- Fabric softeners, or similar products, should be used as specified by the fabric softener instructions.
- The final part of a tumble dryer cycle occurs without heat (cool down cycle) to ensure that the items are left at a temperature that ensures that the items will not be damaged.
-
WARNING: Never stop a tumble dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated.
-
The exhaust air must not be discharged into a flue that is used for exhausting fumes from appliances burning gas or other fuels.
-
The appliance must not be installed behind a lockable door,a sliding door or a door with a hinge on the opposite side to that of the tumble dryer. In such a way that a full opening of the tumble dryer door is restricted.
-
Oil-affected items can ignite spontaneously, especially when exposed to heat sources such as in a tumble dryer.
The items become warm, causing an oxidation reaction in the oil. Oxidation creates heat. If the heat cannot escape, the items can become hot enough to catch fire. Piling, stacking or storing oil-affected items can prevent heat from escaping and so create a fire hazard. -
If it is unavoidable that fabrics that contain vegetable or cooking oil or have been contaminated by hair care products be placed in a tumble dryer they should first be washed in hot water with extra detergent-this will reduce, but not eliminate, the hazard.
-
The appliance should not be overturned during normal use or maintenance.
-
Remove all objects from pockets such as lighters and matches.
-
This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
-
For appliances with ventilation openings in the base, that a carpet must not obstruct the opening.
-
If the power cable is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
-
This appliance is for indoor use only.
-
The openings must not be obstructed by a carpet.
-
Children of less than 3 years should be kept away unless continuously supervised.
-
Electrical equipment didn’t intend to operate in non-air-conditioned or external atmospheres
Correct Disposal of this product:
This marking indicates that this product should not be disposed of with
other household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environmentally safe recycling.
Part name
Part name
- Top board
- Control panel
- Door
- Cabinet
- Filter
- Power lead
- Door lock
- Tumbling box
- Reset button
- Display screen
Installation before use
Step 1: Power source and grounding
The dryer employs an alternating current with the rated voltage and
frequency. When the voltage fluctuates between 10% of the rated voltage, the
dryer can work normally. A special power socket for the dryer should be set
aside the dryer for convenience and safety. The method of connection of the
socket is as the figure below.
Notices:
The socket and the grounding wire must be installed by an electrician to prevent incorrect installation or use of the socket and to guarantee the safety of the use of electricity. The power wire of the dryer employs a Y connection,if the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard. If no connection of the grounding wire with the neutral wire, otherwise the cabinet will be charged. which is likely to cause the danger of electric shock.
Step 2: Precautions
♦ Do not store or install the dryer where it will be exposed to water or the
weather. If unavoidable, please dry the dryer before each use.| ♦ Please
install dryer in a well-ventilated area for better air circulation and to
avoid obstructing air intake passage.
---|---
♦ To aviod problems from wet clothes minimize risk, dehydrate items before
placing inside the dryer.| ♦ Do not spray combustible aerosols near the
dryer during use. If accidental spray occurs do not touch the plug or start/
pause button .
♦ Do not dry any clothes that are contaminated with combustible materials:
i.e. Gasoline, methylated spirits, etc.| ♦ Dont operate this dryer if it is
damaged, malfunctioning,partially disassembled or has missing or broken parts.
♦ When the dryer is working, the back side will become hotter. In order to
avoid such risk, The dryer is not intended for use by young children or infirm
persons without supervision.| ♦ Please do not use the machine if your feet
or hands are wet.
♦ To avoid deformation of the control panel, do not place any heavy or hot articles on top of the dryer.| ♦ Do not try to dry raincoats or fluff clothes, or items containing rubber or elastic materials on any heat setting.
---|---
♦ To avoid scalding, do not open the dryer door until the program has
completed.
|
This product belongs to type I electronic products and please take note of safety problems accordingly:
1. lt is rule to use the power that is buried in the earth and will not touch any social equipment such as gas pipe or water pipe etc. Make sure the difference of different lines and they are not connected.
2. Please use special socket which is according to National Standard and will endure 10Acurrent.
To be safe, please make improvements as soon as possible according to the rules and suggestions mentioned above.
Clothes with the following markings shall not be dried in this dryer.
Simple installation
Step 1:
The dryer should be placed in a ventilated area with no less than 15 cm
distance from the wall. If placed in a room such as bathroom, it is suggested
there are no obstacles of 1.5m in front of the dryer and it is kept
ventilated. Step 2: The horizontal adjustment
Tie a heavy subject on the string on the front and two sides of the dryer.
Please refer to the below figure, and if A’=A, B=B, this means the dryer is
placed horizontally. If the objects do not match up, something should be used
to level the dryer.
Notice:
If the dryer is not placed horizontally(the lean angels is no more than 2 °
) , the dryer will operate unbalanced and be more likely to fault.
Notice when installing:
- Do not install the dryer in the open air or place were easily damaged by water;
- Do not place the back of the dryer near the curtain or other obstacles;
- Do not place the dryer near gas or flammable materials.
Operation explanation
Preparing before drying
- Clothes have to be washed and dehydrated before putting in the dryer.
- Put the same kind of clothes to dry together.
- Sort your clothes into loads that take a similar time to dry e.g. Heavier items from light items.
- Make sure the decorations and buttons are safe for high temperatures and will not damage the inner tube of the dryer. Make sure the clothes are well protected.
- It is suggested to turn the clothes inside out.
- Please check the clothes after washing, if there is dirt on the clothes, the drying process cannot be relied on to remove the remaining dirt.
- Please make sure the power plug is well connected and the supply cord is in good condition.
Check filter
- Make sure the filter is well-cleaned and in the right position.
- Filter must be cleaned regularly.
Put clothes into the dryer
- For faster results it is better put clothes with 1 /2-2/3 the capacity of the inner tube for drying because drying needs space to make clothes circulate evenly.
- When drying big clothes, it is better to include several small items to help balance the load.
- When drying expensive or little clothes ( < 1. 5kg) it is better to add several towels whose fibers won’t fall off easily, this will help dry the clothes more evenly.
- To avoid creased, rough or static electricity clothes, do not over-dry.
The reference weight of dry clothing
Close the door
Instruction on the control panel
- Start / Pause
- Program (including Extra dry, Smart Dty, Airing,30mins, 60mins, 90mins)
- Heating ( Full, Half, Airing three heating modes)
- Power On / Off
Operation explanation
- Press the power touch key to turn on (off) the power;
- Program setting, the user may according to the clothing quality and clothing quantity choose the program. Click the “program” touch key (Extra dry, Smart dry, Airing, 30mins, 60mins, 90mins), the program indicator lights up in turn, and accompanied by the touch key tone, after the election, the indicator light is no longer flashing.
- Three heating modes (optional) only can be choosed in 30mins, 60mins and 90mins three programs), the user can choose Full heating, Half heating, or Airing the three modes by cycle selection according to the quality of the clothes lights go on intrude and the touch program with the touch key tone, selected. The light is not blinking.
- Press the ”Start” touch key, the dryer will start after 2 seconds; then press this touch key again, and the dryer will pause ruler can reset the program, also can be in this status opens the door to regulating clothes, open the door to be careful of hot steam, to avoid scalding. Press again, and the dryer restarts and continues to complete the selected program. The smart touch key is the start and pause switch for the dryer. If you turn on the power and press the “start” touch key directly, the dryer will run the Smart dry program.
- The Children lock function after the dryer starts and runs, press the “Program ” + “Start ”key for about 2 seconds at the same time, and the buzzer sends out the confirmation tone, and the child lock on the display screen blinks and lights up or goes out. To prevent children misuse. Again, press the two touch keys at the same time, and the Children Lock is canceled.
The default state of each program:
- Crease Guard means after programming, it adds extra 30s’ one-way running to shake clothes in order to protect from creasing.
- The inside temperature and humidity will not affect drying time.
- Check the label attached to the clothes and choose the right temperature and time according to the explanation.
- The few clothes below 2. 0kg shall be selected with H extra dry program and HfullH heat for drying.
End of Program
At the end of the program, the buzzer rings to remind take out clothes from
the dryer.
Take out the Plug
To be safe, please unplug the unit after each use.
Clear filter, cabinet, and inner tub.
- Accumulated dust, fiber&debris will affect the air circulation inside the dryer which will cause longer drying times. It is advised to clean the filter and inner tube after each use.
- Make sure to cut off the power before clearing
Filter Clean
-
Remover filter
The lint filter is located in the door opening, remove the lint filter and open it out. -
Clean filter
Wipe down with a damp cloth. -
Re-fit filter
Once the filter is dry, re-fit into the door opening. -
Wipe the filter after using it every time.
Cleaning cabinet and inner tube
Use a soft damp cloth to wipe the cabinet and inner tube.
- do not rinse with water directly
- do not use scour wipes
- do not use gasoline and alcohol wipes
Make sure open to the front door for aeration after cleaning the inner tube.
Other functions description
Step 1: Warning function
Fault
| ****
Cause of fault
| Fault indication (sound)| Solution of alarm
---|---|---|---
Open door alarm| The door has opened during the program| not
solved, the buyer sounds every15 minutes| Close door
Step 2: Auto power-off function
- This machine will auto-power off after 10 minutes when you do not set any program.
- This machine will auto power off after 6 times the buzzer on drying.
Trouble Solution
Trouble | Cause | Solution |
---|---|---|
♦ Power cut | ♦ Wait for power to restore |
♦ Check the power socket and make sure plug is connected tight
♦ Remove clothes and check dampness, Max volume of the dryer is 7kg
♦ Please careerman exchange the temperature fuse
| ♦ Power plug not correctly connected
Dryer won’t start| ♦ Dry clothes exceed maxmum volume
| ♦ Temperature fuse is cut
Dryer releasing extensive heat| ♦ Lint trap requires cleaning
♦ Intake or exhaust passage is obstructed
| ♦ Clean lint trap
♦ Clean air intake and exhaust and check for obstructions. (eg. Curtain)
Wet clothes
| ♦ Dryer toofull
♦ Clothes left in dryer too long after the end of the program
♦ Clothes not assorted properly
♦ Wrong temperature for clothes
| ♦ Make sure the dryer is not too full
♦ immediately remove clothes when program finished
♦ See page 7.
Observe the maintenance label on clothes
Shrinks clothes
|
♦ Clothes over dried
| ♦ Observe the maintenance label on clothing. Remove clothes from dryer
while still damp, finish drying process by hang drying.
Lint balls on clothing| ♦ Synthetic fibre rubbing with each other cause
lint which attaches to clothes| ♦ Use fabric softener. Please spray settled
glue on cuff and neckline when ironing.
- If there Is no heat from the dryer, please press the plastic push button at the rear of the dryer to activate the thermostat In order to reheat the element, please see the illustration.
The sound of the dryer when runs can cause
- Excessive noise of vibration: Due to heavy wet clothes turning and bumping.
- Air bumping: When drying, the machine will generate steam which will come out from the exhaust pipe. This will cause bumping with the bottom of the inner tub.
Notice
Read before use:
-
Oil-affected items can ignite spontaneously, especially when exposed to heat sources such as in a tumble dryer. The items become warm, causing an oxidation reaction in the oil. Oxidation creates heat. If the heat can not escape, the items can become hot enough to catch fire. Piling, stacking, or storing oil-affected items can prevent heat from escaping and so create a fire hazard.
-
If it is unavoidable that fabrics that contain vegetable or cooking oil or have been contaminated by hair care products be placed in a tumble dryer they should first be washed in hot water with extra detergent-this will reduce, but not eliminate, the hazard.
-
The final part of a tumble dryer cycle occurs without heat (cool down cycle)to ensure that the items are left at a temperature that ensures that the items will not be damaged.
Warning: Never stop a tumble dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat Is dissipated. -
This dryer has ventilation openings in the base, carpet must not obstruct the openings.
-
The dryer must not be installed behind a lockable door, a sliding door, or a door with a hinge on the opposite side to that of the tumble dryer In such a way that a full opening of the tumble dryer door is restricted.
-
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instructions concerning the use of the appliance by a person responsible for their safety.
-
Children should be supervised to ensure that they don’t play with the appliance.
-
The lint trap has to be cleaned frequently, lint must not be allowed to accumulate around the tumble dryer.
-
The tumble dryer is not to be used if industrial chemicals have been used for cleaning.
-
Caution, risk of fire symbol-This appliance has a risk of fire, caution should be enforced while operating.
-
Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes, and wax removers should be washed in hot water with an extra amount of detergent before being dried in the tumble dryer.
-
Items such as foam rubber(latex foam), shower caps, waterproof textiles, rubber-backed articles, and clothes or pillows fitted with foam rubber pads should not be dried in the tumble dryer.
-
Fabric softeners, or similar products, should be used as specified by the fabric softener instructions.
When using:
- If the drying process can operate while the door is open it should be sent to maintenance.
- If the drying process can operate without pushing the START /PAUSE button it should be sent to maintenance.
- This dryer is not intended to be placed on top of a washing machine.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>