CREATIVE MUVO GO Portable Waterproof Bluetooth 5.3 Speaker User Guide
- June 3, 2024
- Creative
Table of Contents
CREATIVE MUVO GO Portable Waterproof Bluetooth 5.3 Speaker
MULTI-LANGUAGE QUICK START GUIDE DOWNLOAD
creative.com/support/MUVOGo
REGISTER YOUR PRODUCT
creative.com/register
TECHNICAL SUPPORT
creative.com/support
OVERVIEW
- Volume + / Next Track Button
- Volume – / Previous Track Button
- Play / Pause Button
- Lanyard Attachment Point
- Power Button
- LED Status Indicator
- Bluetooth® Button
- Charging LED Indicator
- USB-C Port (for charging only)
BLUETOOTH PAIRING
Note:
- Creative MUVO Go will automatically enter Bluetooth pairing mode upon powering on
- The LED status indicator will blink white when it is powered on and not connected to any device or when it is reconnecting to a previously connected device
CONTROLS
BATTERY CHARGING
BATTERY LEVEL INDICATOR
WIRELESS STEREO LINK
Creative MUVO Go features Wireless Stereo Link, a technology that offers a wider soundstage experience by wirelessly linking two MUVO Go speakers. Follow the instructions below to set it up:
Note: When both devices are wirelessly linked, only Device A’s buttons will remain active
ATTACHING A LANYARD
MASTER RESET
- Press and hold the Bluetooth button for 5s to perform a Master Reset. Creative MUVO Go will revert to its default state upon completion.
- Master Reset is reserved for cases where users encounter issues while the speaker is in use or during situations such as: Bluetooth Pairing failure, random LED blinking, or data reset.
© 2022 Creative Technology Ltd. All rights reserved. Creative, the Creative logo and MUVO are trademarks or registered trademarks of Creative Technology Ltd in the United States and/or other countries. The Bluetooth® word mark and logo are owned by Bluetooth SIG, Inc. and any use of such marks by Creative Technology Ltd is under license. All other trademarks are the property of their respective owners and are hereby recognized as such. All specifications are subject to change without notice. Actual product may differ slightly from images shown. Use of this product is subject to a limited warranty.
TECHNICAL SPECIFICATIONS
- Power Output: 10W RMS x 2
- Total System Peak Power: 40W
- Frequency Range: 60–20,000 Hz
- Signal-to-noise Ratio (SNR): ≥ 75 dB
- Input rating: 5V 2A
- Lithium-ion Battery Rating: 7.2V, 2600 mAh (18.72 Wh)
- Battery: 2600 mAh rechargeable Lithium-ion x 2
- Total Playtime: Up to 18 hours of audio playback^
- Charging Time: 4.5 hours*
- Bluetooth Version: Bluetooth 5.3
- Operating Frequency: 2402–2480 MHz
- Operating Range: Up to 10m / 33 ft, measured in open space. Walls and structures may affect range of device
Supported Bluetooth Profiles:
- A2DP (Advanced Audio Distribution Profile),
- AVRCP (Audio / Video Remote Control Profile) Supported Codec: SBC
Maximum RF Output Power: 7 dBm Maximum Operating Temperature: 45°C
^Based on moderate volume level. Actual battery life will vary with use,
settings, songs, and environmental conditions
*Charging time may vary depending on conditions such as environmental temperature or presence of dust on charging contact point, which may affect charging speed
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>