SPT SD-2224DW ENERGY STAR Countertop Dishwasher Instruction Manual

SPT SD-2224DW ENERGY STAR Countertop Dishwasher

Dear Customer,

• Please read this manual thoroughly before use. Understanding the unit will help you use and maintain the dishwasher properly.
• Please keep it in a safe place for future reference.
• Pass it on to any subsequent owner of the appliance.

For your safety, the information detailed in this manual should be followed. Improper use/handling can cause serious damage to the appliance and/or to the user, including but not limited to fire, explosion, electric shock, resulting in personal injury or death.

Before Calling for Service

• Review the section on Troubleshooting Tips – it may help you solve some common issues.
• If you can not resolve the troubles by yourself, please ask for the help of professional technicians.

NOTE: The manufacturer, following a policy of constant development and updating of the product, may make modifications without giving prior notice.

WARNING! When using your dishwasher, follow the precautions

IMPORTANT SAFETY INFORMATION

GROUNDING INSTRUCTIONS

• This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance of electric current. This appliance is equipped with a cord having an equipment-grounding conductor and a grounding plug.
• The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local codes and ordinances.

WARNING!

• Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
• Check with a qualified electrician or service representative if you are in doubt whether the appliance is properly grounded. Do not modify the plug provided with the appliance; If it does not fit the outlet. Have a proper outlet installed by a qualified electrician.

WARNING! PROPER USE

• Use this appliance only for its intended purpose as described in this manual.
• This appliance is not intended for use by children.
• Do not abuse, sit on, or stand on the door or dish rack of the dishwasher.
• Do not touch the heating element during or immediately after use. (This instruction is only applicable to machines with a visible heating element.)
• Do not operate your dishwasher unless all enclosure panels are properly in place. Open the door very carefully if the dishwasher is operating, there is a risk of water squirting out. Do not place any heavy objects or stand on the door when it is open. The appliance could tip forward.
• When loading items to be washed:
  • Locate sharp items so that they are not likely to damage the door seal;
  • Warning: Knives and other utensils with sharp points must be loaded in the basket with their points down or placed in a horizontal position.
• Check that the detergent receptible is empty after completion of the wash cycle.
• Do not wash plastic items unless they are marked dishwasher safe or the equivalent. For plastic it ems not marked as dishwasher safe, refer to the manufacturer’s recommendations.
• Use only detergent and rinse additives designed for an automatic dishwasher.
• Never use soap, laundry detergent, or hand-washing detergent in your dishwasher. Keep these products out of the reach of children.
• Keep children away from detergent and rinse aid, and keep children away from the open door of the dishwasher, there could still be some detergent left inside.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Dishwasher detergents are strongly alkaline, they can be extremely dangerous if swallowed. Avoid contact with skin and eyes and keep children away from the dishwasher when the door is open.
• The door should not be left in the open position since this could present a tripping hazard.
• If the supply cord is damaged, it must be replaced by the manufacturer its service agent, or a similarly qualified person in order to avoid a hazard.
• Remove the door before discarding an old dishwasher.
• Please dispose of packing materials properly.
• Use the dishwasher only for its intended function. During installation, the power supply must not be excessively or dangerously bent or flattened. Do not tamper with controls.
• Use a new set of hoses to connect this appliance to the water mains. Do not reuse old hose sets.
• The maximum number of place settings to be washed is 6.
• The maximum permissible inlet water pressure is 1Mpa.
• The minimum permissible inlet water pressure is 0.04Mpa.

PARTS IDENTIFICATION

1. Detergent Dispenser
2. Cutlery Basket
3. Filter assembly
4. Rinse Aid Dispenser
5. Spray Arms
6. Cup Shelf
7. Basket
8. Power Cord
9. Inlet pipe connector
10. Drain pipe connector

ACCESSORIES

1. Drain Hose:

2. Drain port connection

3. Quick connect connection
   Inlet Hose:

4. Inlet port connection

5. Quick connect connection
   Faucet Adapter:

6. Faucet Adapter

7. Faucet washer
   Quick Connect:

8. Pressure relief valve

9. Faucet adapter connection

10. Locking collar

11. Inlet hose connection

12. Drain hose connection

Your dishwasher comes equipped with a ‘quick connect’ assembly (includes inlet and drain hose). The faucet adapter must be installed on the faucet before you can connect the dishwasher. This adapter is installed on the Quick Connect. The faucet adapter is compatible with faucets inclusive of either male (outside) or female (inside) threaded faucet connections.

WARNING!

In order to avoid water pressure buildup, please turn off the faucet after each use.

INSTALLATION

Attention: The installation of the pipes and electrical equipment should be done by professionals.

Warning

• Electrical Shock Hazard Disconnect electrical power before installing the dishwasher.
• Failure to do so can result in death or electrical shock.

1. Unpacking
   Have at least two people move and install the dishwasher to prevent personal injuries. Remove all packaging materials: shipping tape, foam pieces, etc. before use. Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners. Check and make sure all parts necessary for installation are included. If parts are missing, please contact Sunpentown at 1-800-330-0388. The dishwasher must be placed on a level and flat surface that can support the weight when the dishwasher is fully loaded.

2. Positioning
   This dishwasher is designed for countertop installation. The dishwasher is equipped with a water supply and drain hoses that can be positioned to the right or the left to facilitate proper installation. Make sure the water supply/faucet connection is within reach of the inlet and drain hose assembly (5 ft).

3. Electrical Requirements

   • Read all safety precautions listed at the beginning of the manual. Make sure the electrical outlet is within reach of the power supply cord (4.5 ft). It is recommended
     to not use receptacles that can be turned on/off by a switch or pull chain.

   • Refer to the rating label and be sure the voltage and frequency correspond to the power supply. Use a dedicated circuit that is rated for 10 amps.

   • The dishwasher is equipped with a power supply cord with a 3-prong grounding plug. The cord must be plugged into a mating 3-pronged wall receptacle. If a mating wall receptacle is not available, it is the personal responsibility of the customer to have a properly grounded, 3-pring wall receptacle installed by a certified electrician.

WARNING!

• DO NOT use an extension cord or an adapter plug with this appliance.
• DO NOT, under any circumstances, cut or remove the ground-prong.
• Improper connection of the connection of the equipment grounding conductor can result in electric shock.
• Check with a qualified electrician or service representative if you are in doubt whether the appliance is properly grounded.

Connecting the Dishwasher

Your dishwasher is equipped with a Faucet Adapter (installed on the Quick Connect), Quick Connect, Drain and Inlet Hose. The faucet adapter must be installed on the faucet before connecting the dishwasher.

Remove the Faucet Adatper by pulling back the locking collar on the Quick Connect; while pulling the Faucet Adapter in the opposite direction.

The Faucet Adapter is compatible with either female (inside) or male (outside) threaded faucet connections:

• If your faucet is “female” type, both rubber washers must be installed inside the faucet adapter.
• If your faucet is “male” type, use only one rubber washer. Remove the second rubber washer.

Installing Quick Connect to faucet

1. Screw the Faucet Adapter onto (or into) the faucet. Check for leaks (use Teflon or plumber tape to eliminate any leaks if necessary).
2. Connect the six-sided connection of the Drain Hose to the dishwasher’s drain port, located on the back of the dishwasher cabinet. To avoid damage to threads, do not over-tighten.
3. Connect the star-shaped connection of the Inlet Hose to the dishwasher’s inlet port, located on the back of the dishwasher cabinet. Do not over-tighten.
4. Connect the circular connection of the Drain Hose to the longer (bottom) male connection on the Quick Connect.
5. Connect the circular connection of the Inlet Hose to the shorter (top) male connection on the Quick Connect.
6. Attach the Quick Connect assembly onto the Faucet Adapter – pull down on the locking collar, while pushing the Quick Connect assembly upwards onto the Faucet Adapter.
7. Release the locking collar when the Quick Connect Assembly snaps onto the Faucet Adapter. Verify connection is secure.
8. Slowly turn on the water line and check for any signs of water leak at all connections. If leaks are located, immediately turn off the water supply and repair hose connections.

• IMPORTANT

  • Once you turn on the water supply (even if turned off immediately), the inlet hose will be pressurized.
  • To relieve the water pressure (make sure the water supply is turned off): press and hold the red pressure relief button on the Quick Connect until the flow of water stops.

• WARNING
  FAILURE TO RELIEVE WATER PRESSURE, BEFORE DISCONNECTING THE QUICK-CONNECT FROM THE FAUCET, WILL RESULT IN BACK-PRESSURE OVER-SPRAY. THE TEMPERATURE OF INCOMING WATER CAN BE VERY HOT, AND BACK-PRESSURE OVER-SPRAY CAN CAUSE SEVERE BURNS AND/OR SCALDING.

• DANGER
  DO NOT LET CHILDREN DISCONNECT THE DISHWASHER; CLOSE SUPERVISION OF CHILDREN IS ALWAYS IMPORTANT AROUND APPLIANCES.

• NOTE: Hard water conditions will adversely affect the washing performance of your dishwasher. Hard water conditions will also contribute to ‘lime’ (white film substance) deposits and/or ‘scaling’ on the stainless steel surface of the dishwasher tub and heater element, located in the sump underneath the removable filter screen. To assist in minimizing these conditions, it is recommended to periodically operate/rinse the inside of the dishwasher (empty) using 1 cup of white vinegar at least once a week.

Disconnecting the Dishwasher

1. Turn off the water supply at the faucet.
2. Disconnect the power supply cord.
3. Release water pressure inside the inlet hose. Press and hold the red Pressure Relief Valve until the flow of water stops.
4. Disconnect the Quick Connect assembly by pulling down on the locking collar and releasing it from the Faucet Adapter.

OPERATING INSTRUCTIONS

IMPORTANT To get the best performance from your dishwasher, read all operating i

Checklist

The following things should be checked before using the dishwasher:

• The dishwasher is level
• The water (faucet) is turned on
• There are no leaks at the drain and inlet ports
• The unit’s power plug is connected to a grounded outlet
• Power is turned on
• There are no kinks in the drain and inlet hoses
• All packaging and printed materials are removed from the dishwasher

Attention: After installation, please make sure to keep this manual.

Control Panel

1. Power Button: Press to turn the unit ON/OFF
2. Delay Button: Press to delay the start of the wash cycle
3. Display Screen: Shows remaining time or current running state
4. Rinse-Aid Warning Indicator: Indicates the rinse aid needs to be refilled
5. Water Supply Indicator: Indicates no water supply (faucet is not turned on) Wash Program Selector: Press to select the desired wash program
6. Start/Pause Button: Press to START or PAUSE the dishwasher
7. Wash Program Indicators: Indicates selected wash program

Loading the Dishwasher

A properly loaded dishwasher is key for optimal performance. Never overflow the dishwasher as it can reduce the unit’s efficiency. Improper placement of items can also affect the dishwasher’s performance. Position the dishes and utensils so they are secure during the wash cycle and will not be moved by sprayed water.

This dishwasher is designed to hold 6 place settings:

• 6 cups
• 6 glasses
• 2 serving dish/bowls
• 6 saucers
• 6 bowls
• 1 large platter
• 6 dinner plates
• 6 dessert/bread plates
• 6 sets of utensils

Plate racks The basket is fitted with plate racks which can be stowed horizontally if required.

Cutlery Basket Flatware should be placed in the cutlery basket with handles at the bottom. Knives and other sharp utensils should be placed with handles up, but make sure the tips do not extend through the bottom. If the rack has side baskets, spoons should be loaded individually into appropriate slots. Longer utensils should be placed horizontally on the cup shelf.

WARNING!

• Do not let any item extend through the bottom.
• Always load sharp utensils with the sharp point down!
• Be sure similar pieces do not nest together.

FOR BEST PERFORMANCE:

• Scrape off food particles before loading.
• Soften remnants of burnt food in pans
• Place cups, glasses, pots/pans face down.
• Curved items, or those with recesses, should be loaded at a slant so water can run off.
• Allow sufficient space between items to allow water and detergent to reach each surface.
• Ensure glasses and stemware are secure and balanced.
• Ensure breakable items are not sitting on metal cutlery which can ship the dishes.
• Do not overload the dishwasher.

WARNING

To prevent damage, do not remove glass and cutlery from the dishwasher immediately after the end of the program. Allow the dishware to return to room temperature.

The following items are not suitable for wash in the dishwasher:

• Cutlery with wooden, horn china or mother-of-pearl handles and wooden platters
• Plastic items that are not heat resistant.
• older cutlery with glued parts that are not temperature-resistant.
• Bonded cutlery items or dishes
• Pewter or copper items
• Crystal glass
• Steel items subject to rusting
• Very small items as they may fall out of the basket
• Items made from synthetic fibers

The following are of limited suitability:

• Silver and aluminum – tend to discolor after washing
• Glazed patterns may fade

1. Detergent Dispenser
   Use only detergent specifically made for use with dishwashers. Keep detergent fresh and dry. Do not put powder detergent into the dispenser until you are ready to wash dishes, which can get damp and not dissolve properly.
   The hardness of your water will affect the amount of detergent to use. With hard water, extra detergent is needed to remove deposits left by excessive minerals. Soft water requires less detergent (too much detergent with soft water can cause permanent cloudiness of glassware)

2. DETERGENT TABLETS
   Detergent tablets of different brands dissolve at different speeds. For this reason, some tablets cannot dissolve and develop their full cleaning power during short programs.
   If using a detergent tablet, please select a long program to ensure complete removal of detergent residuals.

3. ADDING DETERGENT
   The dispenser must be filled before the start of each wash cycle. Your dishwasher uses less detergent and rinse aid than a conventional dishwasher. Generally, only one tablespoon of detergent is needed for a normal wash load. After filling, close the lid and press until it locks in place.

WARNING! Dishwasher detergent is corrosive! Take care to keep i

• Main detergent chamber (holds up to 15 grams of detergent)
• Tablet or pre-wash cycle detergent chamber. If dishes are heavily soiled, add additional detergent here, which will be released during the pre-wash phase. (holds up to 25 grams of detergent)

NOTE

• Please observe manufacturers’ dosing and storage recommendations as stated on detergent packaging.
• NEVER USE HAND DISH DETERGENT!

Rinse Aid Dispenser

The rinse aid is released during the final rinse to help remove spots and prevent film build-up on your dishes, flatware, and cookware. Also improves drying by allowing water to sheet off the dishes. Your dishwasher is designed to use liquid rinse aids.

ADDING RINSE AID

The rinse aid dispenser is located inside the door, next to the detergent dispenser.

1. Make sure the dishwasher door is fully open.
2. Turn the dispenser cap counterclockwise to the left arrow. Lift and remove the cap.
3. Add rinse aid until the indicator window turns completely black – be careful not to overfill.(The capacity of the rinse aid container is approx. 3.7 oz.)
4. Replace the cap by aligning to the “open” (left) arrow and turn clockwise to close.
5. Clean up any spilled rinse aid to avoid excessive foaming in the next wash.

REFILLING RINSE AID

When the rinse aid container is full, the Rinse Aid Indicator (next to the cap) will be dark. As the rinse aid diminishes, the size of the dark dot will also reduce. Do not let the rinse aid fall below 1/4 full:

Attention! Only use a branded rinse aid for the dishwasher. Never fill the rinse aid dispenser with other substances such as liquid detergent.

ADJUSTING THE RINSE AID DISPENSER

The rinse aid dispenser has four settings. It is recommended to start with the dispenser set at “3”. If spots or poor drying occurs, increase the setting to “4”. If there are sticky whitish stains on dishes or a bluish film on glassware, reduce the setting to “2” or “1”.

Wash Cycle Table

Starting A Wash Cycle

Once the dishwasher is loaded, follow these instructions to start the wash cycle:

1. Ensure the dishwasher is properly connected to the power supply.
2. Ensure the water supply is properly connected and is turned on to full pressure.
3. Add detergent and check Rinse Aid is full.
4. Close the door and press the POWER button to turn on the dishwasher.
5. Press the PROGRAM button to select the desired program: Heavy -> Normal -> Light -> Mini Party -> Rinse -> Speed -> Soak.
6. If you wish to delay the start time, press the DELAY button to select: 2 hrs -> 4 hrs -> 6 hrs -> 8 hrs.
7. Press the START/PAUSE button to begin the wash cycle.

NOTE: When the START/PAUSE button is pressed during a wash cycle, the unit’s operation is suspended and the display on the screen will stop blinking. During the pause, the unit will beep once every minute until the START/PAUSE button is pressed again to resume operation.

Changing the Wash Program

You can change the wash program if the unit just started and only ran for a short time. Otherwise, detergent may have been released and water drained. If this is the case, the detergent dispenser must be refilled.
Press and hold the START/PAUSE button for three seconds or more and the unit will be in the standby state. The program can be changed at this point.

NOTE: If you open the door during a wash cycle, the unit will be paused. After the door is closed, you need to press the START/PAUSE button to resume operation.

WARNING: opening the door during the wash cycle may result in injury from hot water.

Note the following indications of the dishwasher:

• All lights off = Stand-by mode
• Display is on steady (not blinking) = Unit is paused
• Display is blinking = Operating

Forgot to Add a Dish?

The dish can be added any time before detergent is released:

1. Press the START/PAUSE button
2. Open the door slightly to stop the cycle
3. After the spray arm has stopped spinning, open the door fully
4. Add the forgotten dishes
5. Close the door
6. Press the START/PAUSE button and the unit will resume operation after 10 seconds

At the End of the Wash Cycle

When the wash cycle has finished, the dishwasher will buzz for 8 seconds.

1. Turn off the unit by pressing the POWER button
2. Shut off the water supply and open the door.
3. Leave the door ajar and wait a few minutes before unloading. This will allow the dishes to cool and assist in the drying process. Dishes that are still hot are more susceptible to breakage.
4. Unload the dishwasher. It is normal for the dishwasher to be wet inside.

MAINTENANCE

Filter System

The filter system consists of a Coarse Filter, a Fine Filter, and a Main Filter. The filter system prevents large remnants of food or other objects from getting inside the pump.

• C. Coarse Filter
  Larger items, such as pieces of bone or glass, that could block the drain are trapped in the coarse filter. To remove items caught by this filter, gently squeeze the tap on the top of the filter and lift out.

• B. Fine Filter
  This filter holds soil and food residue in the cylindrical base and prevents it from being redeposited on the dishes.

• A. Main Filter
  Food and soil particles trapped by this filter are pulverized by a special jet on the spray arm and washed down the drain.

Filter Assembly

The filter efficiently removes food particles so the wash water can be recycled during a wash cycle. For best performance and results, the filter assembly must be cleaned regularly. It is recommended to remove the larger food particles trapped in the filter after each use by rinsing the filter assembly under running water.

To remove filter assembly:

1. Turn the Filter assembly counter-clockwise and lift to remove entire assembly.
2. Lift B and C upwards to remove from A.
3. Lift C upward to remove from B.

Reassemble in reverse order – make sure the Fine Filter is properly seated.

WARNING!

• Inspect the lters after each use.
• Never run the dishwasher without lter assembly in place.
• Improper placement of the lter or damaged lter may reduce the unit’s performance and may cause damage to dishes and/or utensils.
• The entire lter assembly should be cleaned at least one a week.

Cleaning the Filters

Use a soft cleaning brush or old toothbrush to clean the Coarse and Fine Filters.  trotnoc dluoc siht ,seudiser evomer ot meht gnab ro kconk t’nod ,sretl eht gninaelc nehW rehsawhsid eht fo ecnamrofrep ecuder dna sretl eht.

Cleaning the Dishwasher

• The control panel can be cleaned by using a slightly dampened cloth. Dry thoroughly with a soft towel.
• The exterior can be wiped with a towel and mild detergent solution. Wipe clean and follow with a good appliance polish wax.
• Never use sharp objects, scouring pads or harsh cleaners on any part of the dishwasher.

Cleaning the Door

Use only a soft, damp cloth with warm water to clean the edge around the door. To avoid penetration of water into the door lock and electrical components, do not use a spray cleaner of any kind.

Cleaning the Spray Arm

The spray arm can be easily removed for periodic cleaning of the nozzles to prevent possible clogging. Remove the spray arm by grasping the middle and pulling upwards. Wash the spray arm under running water and carefully reinstall making sure the rotary movement is in no way impeded.

WARNING: Abrasive agents and some paper towels may scratch or leave spots on the stainless steel surface.

Protect Against Freezing

Please take frost protection measures during the winter months. Please follow these procedures after each wash:

1. Turn off the dishwasher.
2. Turn off the water supply and disconnect the water inlet hose from the back of the unit.
3. Drain water from the inlet hose and inlet port – use a pan to catch the water.
4. Reconnect the water inlet hose to the inlet port.
5. Remove the Filter System and use a sponge to absorb the water in the sump.

NOTE: if your dishwasher cannot operate due to ice, please contact professional service.

Keeping Your Dishwasher in Shape

• After Every Wash
  Turn off the water supply and leave the door slightly open so moisture and odors are not trapped inside

• No Solvents or Abrasive Cleaners
  Never use abrasive cleaners or solvents to clean the dishwasher. Only use a dampened soft towel with warm water. To remove spots or stains on the interior surface, you may use a cloth dampened with water and a little white vinegar.

• Clean the Door Seals
  Food that gets trapped in the seals may cause odors to form. Periodic cleaning with a damp sponge will prevent this from occurring.

• Clean Filters Regularly
  Clean the filters regularly to prevent clogs and odors.

• Moving the Dishwasher
  If the dishwasher must be moved, try to keep it in the upright position. Never position the dishwasher on its side or upside down.

• Preparation for Storage
  It is recommended you run a wash cycle with the dishwasher empty. Disconnect from power and turn off the water supply. Remove any water remaining in the sump area with a sponge. Leave the door slightly open. this will help the door seals to last longer and prevent odors from forming inside the dishwasher.

TROUBLESHOOTING

Review the troubleshooting guide below to resolve common issues:

__

The dishwasher does not start

| The fuse is blown or the circuit breaker is tripped| Replace the fuse or reset the circuit breaker. Remove any other appliances sharing the same circuit
__

The power supply is not turned on

| Make sure the dishwasher is turned on and the door is closed securely.

Make sure the power is properly connected

The dishwasher door is not properly closed| Close the door and make sure the door latches
__

__

Water not pumped from the dishwasher

| Kink in the drain hose| Check drain hose
Filter clogged| Check and clean filters
__

Kitchen sink clogged

| Ensure the kitchen sink is draining well. Contact a plumber if a sink is not draining
__

__

__

__

Suds in tub

| __

__

__

Improper detergent

| Use only specified detergent for dishwasher use. If improper detergent was used, open the dishwasher and allow the suds to evaporate. Add 1 gallon of cold water to the tub. close the door and start the SOAK cycle to drain the water.

Repeat if necessary.

__

Spilled rinse-aid

| Always clean up rinse-aid spills immediately.
__

Stained tub interior

| __

The detergent used contains colorant

| Do not use any detergents with colorants.
__

White film on dishwasher interior surface

| __

__

Hard water minerals

| Clean the interior with a damp sponge and dishwasher detergent and wear rubber gloves. Never use any other cleaner for the risk of foaming or suds.
Rust stains appear on cutlery| Items are not non-corrosive| Do not place non- dishwasher-safe items in the dishwasher.
Knocking noise inside the dishwasher| Spray arm is knocking against an item in the basket| Pause the wash cycle and rearrange items that are obstructing the spray arm.
Rattling noise inside the dishwasher| Items are not securely placed in the dish rack| Pause the wash cycle to rearrange and secure items.
__

Knocking noise in water pipes

| This may be caused by on-site installation or the cross-section of the piping| __

Contact a plumber. This is not related to the dishwasher.

__

__

__

__

Dishes are not cleaned

| Dishes were not properly loaded| Reload dishes properly.
The selected wash cycle was not powerful enough| Select a more intensive wash cycle.
Not enough detergent| Use more or change the brand of detergent.
Items are blocking the path of the spray arm| Rearrange items so the spray arm can fully rotate.
The filters are dirty/clogged or installed incorrectly| Clean the filter and/or check installation.
__

Cloudiness on glassware

| Combination of too much detergent with soft water| Use less detergent and/or select the shortest wash cycle to clean glassware.
The filter may be dirty or clogged| Clean filter and/or check installation.
Black or gray marks on dishes| Utensils may have rubbed against dishes| Use a mild abrasive cleaner to eliminate marks. Load more carefully.
Detergent left in the dispenser cup| Dishes blocked the detergent cup| Re-load dishes properly.
__

__

__

__

Dishes are not dry

| Improper loading| Re-load dishes properly.
Not enough rinse-aid| Rell the rinse aid.
Dishes were removed too soon| Do not remove dishes from the dishwasher immediately after washing.
__

Wrong cycle selected

| Short cycles have lower cleaning performance. Choose a more intensive cycle.
| Dishes/cutlery have a low-quality coating| Water drainage is more difficult with these items. Dishes/cutlery of this type are not suitable in this dishwasher.

Error Indications

or the water pressure is too low
E4| Overflow| Some elements of the dishwasher leak.

WARNING!

If overflow occurs, turn off the main water supply before calling for service. If there is water in the base pan due to an overflow or small leak, the water should be removed before restarting the dishwasher.

Technical Information

Your Guarantee

If this product is found to be faulty as a result of faulty materials or workmanship within one year from the date of purchase, it will be repaired free of charge.

This guarantee is subject to the following terms:

• Sunpentown must be notified of the fault.
• Proof of purchase must be presented to Sunpentown’s nominated representative.
• The warranty will be void if the product is modified, misused, or repaired, by an unauthorized person.
• The warranty after repair will not be extended beyond the original one-year period.
• All replacement parts will be new or reconditioned.
• Parts, that are replaced, become the property of Sunpentown.
• The warranty applies for the use of the product in the USA only.

What is NOT COVERED:

• Warranty does not include freight charges.
• Damage due to installation error, product abuse, and/or misuse.
• Incidental or consequential damage caused by possible defects with this product.
• Labor cost incurred for the installation and/or removal of a possible defective unit.
• Damage to the product caused by improper power supply voltage, accident, fire, floods, or acts of nature.
• Failure of the product results from unauthorized modifications to the product.
• Improper installation or failure to perform the necessary maintenance.
• Normal wear and tear on parts or replacement of parts designed to be replaced.
• Damage to personal property from the use of the product.
• Replacement or repair of household fuses, circuit breakers, wiring, or plumbing.

This GUARANTEE is in addition to your Statutory Rights SUNPENTOWN INTERNATIONAL INC. 14625 Clark Ave. City of Industry, CA 91745

Tel: 800-330-0388

• service@sunpentown.com
• www.sunpentown.com

FREQUENTLY ASKED QUESTIONS

What is the SPT SD-2224DW ENERGY STAR Countertop Dishwasher?

The SPT SD-2224DW is an ENERGY STAR-rated countertop dishwasher designed to provide efficient and convenient dishwashing for small kitchens and spaces. It's known for its compact size and energy-saving features.

What sets the SPT SD-2224DW Dishwasher apart from other dishwashers?

The SPT SD-2224DW is distinct for its countertop design, which is ideal for small kitchens and apartments. It is also ENERGY STAR certified, offering energy efficiency and eco-friendly operation.

What is the capacity of the SPT SD-2224DW Countertop Dishwasher?

The SPT SD-2224DW typically has a capacity of approximately six standard place settings, making it suitable for smaller households and kitchens with limited space.

What are the key features of the SPT SD-2224DW Dishwasher?

The SPT SD-2224DW dishwasher often includes features like multiple wash cycles, delay start options, a durable stainless steel interior, and a user- friendly control panel.

Is the SPT SD-2224DW Dishwasher easy to install?

Yes, the SPT SD-2224DW is designed for easy installation. It can be connected to a standard kitchen faucet and does not require permanent plumbing modifications.

What are the available wash cycles on the SPT SD-2224DW Dishwasher?

The SPT SD-2224DW often offers a selection of wash cycles, including normal, heavy, eco, glass, and rapid. This variety allows you to choose the best cycle for your dishwashing needs.

Is the SPT SD-2224DW ENERGY STAR certified?

Yes, the SPT SD-2224DW is typically ENERGY STAR certified, indicating its energy efficiency and eco-friendly operation, which can help reduce water and energy consumption.

Can the SPT SD-2224DW Dishwasher accommodate larger dishes and pots?

While the SPT SD-2224DW is designed for smaller dishware, it often features an adjustable and removable dish rack, allowing you to create more space for larger items when needed.

What type of detergent should I use with the SPT SD-2224DW Dishwasher?

The SPT SD-2224DW dishwasher is typically compatible with standard dishwasher detergents, including powder, liquid, or tablet forms. Be sure to follow the manufacturer's recommendations for best results.

Can the SPT SD-2224DW Dishwasher be used with hard water?

Yes, the SPT SD-2224DW often includes a water softener function, making it suitable for use with hard water. This feature helps prevent mineral buildup and ensures clean dishes.

Is the SPT SD-2224DW Dishwasher quiet during operation?

The SPT SD-2224DW dishwasher typically operates with a low noise level, making it a quiet and unobtrusive addition to your kitchen.

What is the warranty period for the SPT SD-2224DW ENERGY STAR Countertop Dishwasher?

Warranty periods for the SPT SD-2224DW range from 1 year to 2 years.

Can I use the SPT SD-2224DW Dishwasher for commercial purposes?

The SPT SD-2224DW is typically designed for residential use and is not recommended for commercial purposes. It's best suited for home kitchens.

What is the price range of the SPT SD-2224DW Countertop Dishwasher?

The SPT SD-2224DW is typically budget-friendly and offers an affordable option for those seeking a compact and energy-efficient dishwasher.

Where can I purchase the SPT SD-2224DW ENERGY STAR Countertop Dishwasher?

You can typically purchase the SPT SD-2224DW ENERGY STAR Countertop Dishwasher from authorized appliance retailers, online marketplaces, or directly from the manufacturer to ensure you receive a genuine product.

DOWNLOAD THE PDF LINK:SPT SD-2224DW ENERGY STAR Countertop Dishwasher Instruction Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>