EMOS EV107 Digital Personal Bluetooth Scales User Manual

EV107
Digital Personal Scales with Bluetooth ****www.emos.eu

Digital Personal Scales with Bluetooth
Read this manual and safety instructions carefully before first use of the product!

Technical specifications:

Toughened safety glass: 6 mm
LCD display: 88 × 40 mm
Maximum weight: 150 kg
Minimum load: 5 kg
Measurement increments: 0.1 kg / 0.2 lb
Unit of measure: kg/lb/st
Memory: max. 9 users; 8 users in Bluetooth app
Minimum requirements for connecting to a Bluetooth device: iOs 6.0 or higher + Bluetooth 4.0 or higher
Android 4.3 or higher + Bluetooth 4.0 or higher height setting: 60–240 cm age setting: 10 to 99 years
unit, increment of fat content measurement: 0.1 %
unit, increment of water content measurement: 0.1 %
unit, increment of muscle mass measurement: 0.1 %
Automatic switch-off after 10 seconds
Low battery/scales overloaded indicator
Power supply: 4× 1.5 V AAA (not included)

Basic rules for use:

1. Digital bathroom scales EV107 are designed for household use only.

2. Have all repairs done by a profeswsional in a repair shop or the store where you bought the device!

3. Do not use the scales in the vicinity of devices which create electromagnetic fields. Place the scales at a sufficient distance from such products to prevent mutual interference.

4. The result is only an approximate value. The product is not a medical tool. Please always consult your doctor regarding medication or diet to achieve optimal weight.

5. Do not insert any objects into the openings on the device.

6. The scales are intended for weighing persons older than 10 and younger than 99 years of age.

7. Weighing house pets is not allowed.

8. Protect the scales from falls or impacts. Do not jump on the scales.

9. You or the device may slip when on a wet surface. Similarly, never stand on the edge of the scales when on a smooth surface, and keep balance while standing on the scales.

10. Due to electronic impedance, never use the device in the following circumstances:
    a) you have an implanted pacemaker or another medical electronic implant,
    b) you suffer from heart problems or disease,
    c) during pregnancy,
    d) you are treated with dialysis,
    e) you have a fever,
    f) you suffer from osteoporosis,
    g) you have an oedema or swelling,
    h) you have been exercising longer than 5 hours,
    i) your heart rate is lower than 60 beats per minute.

11. Only use the scales in accordance with the instructions provided in this manual.

12. The producer is not liable for damage caused by improper use of the device.

13. This appliance is not intended for use by persons (including children) whose physical, sensory or mental disability or lack of experience and expertise prevents safe use, unless they are supervised or instructed in the use of the appliance by a person responsible for their safety. Children must always be supervised and must never play with the appliance.

Description of the scale:

1. button – increases value by 1 unit of measure.
2. SET button – manually turns on the scales, input information settings.
3. button – reduces value by 1 unit of measure.
4. Display
5. Contact surface

Overview of Icons

Inserting/Replacing Batteries

1. Open the battery compartment cover on the bottom side of the scales.

2. Remove the depleted batteries.

3. Insert new 4× 1.5 V AAA batteries. Make sure you observe the correct polarity.
   If batteries are protected by a safety film, remove it first before putting the batteries into the scales.
   Only use alkaline batteries of the same type; do not use old and new batteries at the same time; do not use rechargeable batteries.

4. Close the cover.

Basic Weight Measurement (without BMI) / Changing Unit of Weight

1. Place the scales on a flat, hard and stable surface.

2. Carefully step onto the scales – the scales turn on automatically.
   If you wish to change the unit of weight, repeatedly press the kg/lb/st button on the bottom side of the scales.

3. Stand still on the scales and do not move – after a while, the measured weight will be displayed.

4. Set the desired unit of weight by repeatedly pressing the kg/lb/st button.

5. After 30 seconds, the scales turn off automatically.

MEASURING BODY FAT, WATER, MUSCLE MASS, BONES

INFORMATION FOR MEASURING BODY FAT
WARNING: Persons using a pacemaker or another implant with electronic components are not allowed to use these scales – proper functioning of the implant might be impaired.
NOTE: Correct measurements can only be achieved when standing evenly on the scales, barefoot and with dry feet! The basic principle of the device is measuring the electrical impedance within the human body. To obtain data, the scales send a weak, unnoticeable electronic signal through the body.
The signal is completely safe! The method is called „Bioelectrical Impedance Analysis“ (BIA), a factor based on the mutual relation between the body and weight and the associated percentage of water in the body, as well as other biological data (age, sex, body weight). There are corpulent people with a balanced ratio between fat and muscle mass and lean people with very high body fat value. Body fat is a factor which can significantly impact for instance the cardiovascular system. Therefore, checking both values (fat and weight) is a useful tool for maintaining good fitness and a healthy body.
BODY FAT
Body fat is an important component of the body – it is key for protecting the joints, and is also a source of vitamins, serves as a body temperature regulator, and overall plays a vital role in the human body. It is advised to not reduce its amount rapidly, but to ensure it is at a healthy level, keeping a good balance between muscle mass and fat.
VISCERAL FAT
Visceral fat (or organ fat) is located in the abdominal cavity around and inside our organs. It serves as their protection. Visceral fat is hidden. The amount of visceral fat is not dependent on the amount of subcutaneous fat in the body.
If we have excess visceral fat, it can be more dangerous than subcutaneous fat. Visceral fat is linked to hyperlipidemias (elevated level of lipids in blood). These may lead to more serious chronic diseases, such as diabetes, or acute diseases such as heart attacks or
strokes.

IMPORTANCE OF WATER FOR OUR HEALTH

The human body is approximately 55–60 % water, with ratios varying based on age and sex.
Water has several roles in the human body:

• Constitutes our cell blocks; meaning that every cell, such as skin cells, brain cells, muscle cells, operate correctly only if they contain sufficient water.
• It is an important substance released in our body.
• It transports nutrients and metabolites in the body.

You can compare the reference values for your fitness profile with the following table. It shows the dependence of body fat on age and sex. Focus more on keeping a balance of water in the body. Similarly to fat levels, water levels fluctuate during the day. The obtain relevant results, make measurements always at the same time of the day. The obtained measurements for body fat and water should be taken rather as informative. They are not recommended for medical purposes. Always consult these measurements with your doctor before making radical changes to your regimen.

Age (in years)| Women| Men|
---|---|---|---
Body fat| Water in the body| Body fat| Water in the body| Type
30 and less| 4.0–20.5| 66.0–54.7| 4.0–15.5| 66.0–58.1| Underweight
20.6–25.0| 54.6–51.6| 15.6–20.0| 58.0–55.0| Normal
25.1–30.5| 51.5–47.8| 20.1–24.5| 54.9–51.9| Overweight
30.6–50.0| 47.7–34.4| 24.6–50.0| 51.8–34.4| Obesity
above 30| 4.0–25.0| 66.0–51.6| 4.0–19.5| 66.0–55.4| Underweight
25.1–30.0| 51.5–48.1| 19.6–24.0| 55.3–52.3| Normal
30.1–35.0| 48.0–44.7| 24.1–28.5| 52.2–49.2| Overweight
35.1–50.0| 44.6–34.4| 28.6–50.0| 49.1–34.4| Obesity

Measuring Weight with Display of Body Fat, Water, Muscle Mass, Bones, BMI
Before weighing, enter basic information about each user.
You can save a maximum of 9 users (max. 8 users in Bluetooth application).
Take off your shoes and socks before weighing, otherwise the displayed information will be incorrect.

Saving User Information

Press the SET button.
P1 will begin flashing on the screen, indicating user no. 1.
Again press the SET button to save information for the user under number 1 or press / to change the user number.
Enter input information using buttons / in the following order:
User number – sex – age – height.
Confirm each value by pressing SET.
You can later change the saved information by pressing the SET button.
If you wish to change the unit of weight, repeatedly press the kg/lb/st button on the bottom side of the scales.
After entering input information, the display will show 0.0 kg.
Step onto the scales and stand still; do not move – after a while, the display will show:
Current weight → body fat → water→ bone weight → visceral fat → muscles daily → kilocalorie requirement → BMI → icon for degree f obesity weight loss (down arrow + Decrease) or weight gain (up arrow + Increase) compared to previous measurement.
This information will be displayed 3× in a row.
Then the scales will turn off.
Amount of fat in the body:

Amount of water in the body:

Calories:

BMI:

Visceral fat:

Bluetooth Application

The scales can be used with a Bluetooth application for Android and iOS devices.
If you have a device connected to the scales via Bluetooth, the measured values will automatically save into the application upon each weighing.
Make sure your device meets the following requirements:
Android 4.3 or higher + Bluetooth 4.0 or higher.
iOs 6.0 or higher + Bluetooth 4.0 or higher.
Based on your operating system, find and download the“Smart Scale“ app.
Or you can use the following QR codes to download it:

|
---|---
https://play.google.com/store/apps/details?id=com.vtrump.smartscale&hl=cs| https://itunes.apple.com/us/app/smart-scale-bmi-fat-loss-body-tracking-for- your-family/id674501749?mt=8

Setting Up and Using the Bluetooth Application during Weighing

1. Activate Bluetooth in the settings of your device.
2. Install the „Smart Scale“ application from App Store (iOS) or Google Play (Android).
3. Turn on Bluetooth, slightly shake the device.
4. Slightly press onto the scales with your foot and then let go. Your device will automatically link with the scales.
5. Weigh yourself.

Note:
If you reset your device to factory settings while using the application, all measured/saved data will be deleted.

Saved Users
You can save up to 8 users in the application.

1. Click on the User field on the bottom left in the application.
2. Press + and save user information (add photo, name, age, sex, height); confirm by clicking on the button on the top right.
3. If you later wish to change user information, click on the pencil icon .
4. If you wish to delete a user, click on the Delete button on the bottom.

Sharing Measured Values / Detailed Overview of Measured Values

1. Select a user with the arrows on top and click on the weight value in the middle of the green circle.
2. You will see details about the measured values.
3. Click on the arrow icon on the top right .
4. Select how you want to share the measured values (SMS/e-mail).

BMI

1. Click on the Info icon on the bottom.
2. A table with BMI data will be shown
3. Select a BMI table based on sex using icons .

Calendar of Measurements

1. Open any of the measured values (BMI, fat, calories etc.).
2. A calendar/chart with all past measured values will be shown:
3. You can sort the values by year or month.
4. Clicking the individual points in the chart shows details for each measurement.

Setting the Unit of Weight

1. Click the Settings icon ****on the bottom right.
2. Click on the Unit icon.
3. Select a unit of weight: kg/lb/st.

You can also change the unit of weight when viewing the measured weight by clicking the Kg/Lb./St. icon.
Weighing Reminder

1. Click the Settings icon ****on the bottom right.
2. Click on the Reminder icon.
3. Set the time and date for the reminder (daily, weekly, monthly or off).
4. A reminder icon will be shown on the screen at the set time.

Note:
The reminder function only works if the device was not turned off/restarted or reset to factory values (data deletion) after the reminder was set.
Error Indicators on the Display:

every time you insert batteries).
| Flat batteries.
| Weight limit of the device exceeded.
| Percentage ratio of body fat is above or below the measuring range limit.
| Entered user information is incorrect. Enter correct user information.

Do not dispose of electrical appliances as unsorted municipal waste; use sorted waste collection points. Contact local authorities for up-to-date information about collection points. If electrical appliances are deposited in waste landfills, hazardous substances may leak into the groundwater, enter the food chain and harm your health.

Servis: EMOS SI, d.o.o., Ob Savinji 3, 3313 Polzela, Slovenija
tel: +386 8 205 17 21
e-mail: naglic@emos-si.si

References

• EMOS | Elektro eshop a velkoobchodEMOS | Elektro eshop a velkoobchod

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>