OPTIKA IM-3 IM-3 Series Routine Lab Inverted Microscopes Instruction Manual

June 4, 2024
OPTIKA

IM-3 SeriesOPTIKA IM 3 IM 3 Series Routine Lab Inverted Microscopes -
fig

Routine Lab Inverted Microscopes
Laboratory

Your Preferred Inverted Microscope for Routine

ROUTINE IN UNIVERSITIES, LABS & INDUSTRIES
» Wide range to fulfill specific lab requirements
» Valuable solutions for life and material sciences
» Compliant with several observation methods
AN AFFORDABLE PARTNER WITH HIGH-END FEATURES
» IOS LWD W-PLAN objectives for flat images on 22 mm FN
» Fast, efficient investigation with no particular sample prep
» Trinocular port with beam splitter for most light-demanding needsOPTIKA IM
3 IM 3 Series Routine Lab Inverted Microscopes - LABS

Optically Impressive

MAINTAINING GOOD EYESIGHT
» 10x/22 eyepieces for large specimen view
» Comfortable rubber cup to get rid of annoying external light
» High eye-point for glasses wearers, dioptric adjustment (left eyepiece)
IM-3 & IOS W-PLAN: THE PERFECT COMBINATION
» IOS Infinity corrected optical system
» Full planarity optics on 22 mm (W-PLAN) according to ISO 19012-1
» High-grade Semi-Apo lens available ideal for fluorescenceOPTIKA IM 3 IM 3
Series Routine Lab Inverted Microscopes - COMBINATION

An Extensive Range of Different Configurations

OBSERVE EVEN THE MOST COMPLEX SAMPLES
» Phase contrast lens for transparent sample examination
» LED and HBO fluorescence available for specific purposes
» High quality no cover glass objectives for material science
CONCEPTUAL INNOVATION IN LED FLUORESCENCE
» Choose the lowest operational cost, LED lifetime of 65,000 hours
» Immediate operation, eliminating warm-up/cool-down times
» Forget about lamp centering, adjustment and maintenance OPTIKA IM 3 IM 3
Series Routine Lab Inverted Microscopes - INNOVATION

RPC – Relief Phase Contrast

RPC system is designed to increase visibility and contrast in unstained and living material by detecting optical gradients (or slopes) and converting them into variations of light intensity. Typical applications are transparent specimens, bacteria, tissue culture work, spermatozoa, cells in glass containers, protozoa, mites, fibers, etc.
When viewed under modulation contrast optics, transparent objects that are essentially invisible in ordinary brightfield microscopy take on an apparent three-dimensional appearance dictated by phase gradients in the specimen. There are also no halos exhibited in the image, unlike the images produced with phase contrast optics.
RPC is recommended over DIC technique in case of specimens like crystals (with effects upon polarized light), or contained in specimen carriers such as plastic culture vessels, Petri dishes, etc.

X-LED 8 – Only Available at OPTIKA

STATE-OF-THE-ART ILLUMINATION SYSTEM
» Uncomparable light intensity, exclusive lens & collector design
» Constant pure-white color temperature at all intensity levels
» Unmatched color fidelity, uniformity and brightness
CUT ELECTRICITY BILLS BY 90%
» Money & energy saving, 8 W
» More efficient brightness than a 100 W halogen lamp
» LED long lifetime (65,000 hours = 22 years at 8 hours/day usage)

OPTIKA IM 3 IM 3 Series Routine Lab Inverted Microscopes - Phase
1
Go Digital – Vivid Colors & Contrast For Stunning Images

STAY CONNECTED WITH YOUR SPECIMEN, EASILY
» Trincular port to be always updated with the latest technology cameras, even in the future
» Wide range of cameras matching all the needs, including the more specific ones
» Modern C-mount focusable professional adapters for all kinds of cameras
PROFESSIONAL IMAGE ANALYSIS
» Multi-language software for live-view, picture and video in different file formats
» Advanced functions for pictures processing (EDF, stitching, multi- fluorescence combine)
» Powerful tools to perform measurements and generate custom reports

Multiple Observation Methods

OPTIKA IM 3 IM 3 Series Routine Lab Inverted Microscopes -
METALLOGRAPHY

IM-3 Series Inverted microscopes are useful for observing living cells or organisms at the bottom of a large container (e.g., a tissue culture flask) under more natural conditions than on a glass slide, as it occurs with a conventional microscope. IM-3 Series is engineered and designed to be your ideal solution for fast and reliable routine inspections, with the exclusive, state-of-the-art X-LED 8 illumination system. A particularly simple and ingenious optical design allows stable alignments and smooth and accurate movements. OPTIKA provides different configurations, including innovative LED fluorescence technology for a new, enhanced experience.
X-LED 8 Exclusive Lighting Source
Special technology is able to double the light intensity for incomparable performance, ensuring constant pure-white color temperature (6,300K color temperature).
Relevant money and energy saving thanks to the incredibly low energy consumption which allows you to cut the electricity bills by 90%!
The electric consumption (8 W only) proves the high efficiency of this system: incredibly high light intensity combined with low consumption. Large Specimen View (22 mm Field Number) The F.O.V. (field of view) is based on a comfortable diameter of 22 mm.
This means that an extra wide area of the sample can be inspected and allows a natural and easy view, particularly needed in a laboratory environment.

OPTIKA IM 3 IM 3 Series Routine Lab Inverted Microscopes -
fig In fluorescence, we can offer several options.
According to your application and to the fluorochromes you are using, we can help you to identify the best light source.
Traditional, HBO Fluorescence
» The most used and diffused method, worldwide
» Wide spectrum range for future upgrades
Innovative, LED Fluorescence
» Recommended for routine applications
» Cost-effective, money-saving technology
» Ready for immediate operation
» Eliminate warm-up/cool-down times
» Forget lamp replacement & centering

Routine Lab Inverted Microscopes

Get the most out of our accessories

IM-3 – Brightfield & Phase Contrast Microscope
IM-3 looks at the challenge of the future with confidence, offering first- class optical quality and mechanical versatility, to extend its use with several accessories.
Ensuring top-level brightfield and phase contrast observation, as it comes with a set of 3 IOS LWD W-PLAN PH objectives (10x, 20x and 40x).
The high-efficiency X-LED makes it reliable for all transmitted light observations.
For a more complete solution, choose among the several accessories available (objectives, translating stage, side extensions, holders and stage inserts).

OPTIKA IM 3 IM 3 Series Routine Lab Inverted Microscopes -
Brightfield

Part Description
Observation mode: Brightfield, phase contrast.
Head: Trinocular (2-position 100/0, 50/50), 45° inclined.
Interpupillary distance: Adjustable between 50 and 75 mm.
Dioptric adjustment: On the left eyepiece tube.
Eyepieces: WF10x/22 mm, high eye-point and with rubber cups.
Nosepiece: Quintuple revolving nosepiece, rotation on ball bearings.
Objectives: IOS LWD W-PLAN PH 10x/0.25

IOS LWD W-PLAN PH 20x/0.40
IOS LWD W-PLAN PH 40x/0.65
All with anti-fungus treatment.
Part| Description
---|---
Specimen stage:| Fixed stage, 250×160 mm, with glass and metal stage inserts.
Focusing:| Coaxial coarse (adjustable tension) and fine focusing mechanism with limit stop to prevent the contact between objective and specimen.
Condenser:| LWD pre-centered condenser, N.A. 0.30, W.D. 72 mm. With 4x/10x, 20x/40x phase contrast slider and brightfield. Removable to extend the working distance up to 150 mm.
Transmitted| X-LED 8 with white 8 W LED (6,300K) with brightness control.
With aperture diaphragm. Multi-plug 100-240Vac/6Vdc external power supply.

IM-3F – HBO Fluorescence Microscope
Routine inverted fluorescence microscope for transmitted brightfield, phase contrast and fluorescence observations with IOS LWD W-PLAN objectives. The HBO fluorescence illuminator is combined with blue and green excitation filter set for the visualization of the following fluorochromes: Acridine Yellow, Acridine Orange, Auramine, DiO, DTAF, FITC, GFP, YFP, etc. (blue) plus Rhodamine, Texas Red and TRITC (green). Transmitted light through the exclusive X-LED 8 to ensure a great-looking, rich and high-quality specimen view.OPTIKA IM 3 IM 3 Series Routine Lab Inverted Microscopes - IMAGE
112

Standard filter sets

Name| Excitation filtier (nm)| Dichroic mirror cat off(nm)| Emission filter (nm)
---|---|---|---
B (Blue)| 450 – 490| 495| 520LP
G (Green)| 527 – 553| 565| 575LP
Part| Description
---|---
Observation mode:| Brightfield, phase contrast, HBO fluorescence.
Epi-illumination and filter:| HBO 100 W high-pressure mercury lamp.
3-position filter holder; blue & green included.
Head:| Trinocular (2-position 100/0, 0/100), 45° inclined.
Interpupillary distance:| Adjustable between 50 and 75 mm.
Dioptric adjustment:| On the left eyepiece tube.
Eyepieces| WF10x/22 mm, high eye-point and with rubber cups.
Nosepiece| Quintuple revolving nosepiece, rotation on ball bearings.
Objectives:| IOS LWD W-PLAN 4x/0.13
IOS LWD W-PLAN PH 10x/0.25
IOS LWD W-PLAN PH 20x/0.40
IOS LWD W-PLAN 40X/0.60
All with anti-fungus treatment.
Part| Description
---|---
Specimen stage:| Fixed stage, 250×160 mm, with glass and metal stage inserts.
Focusing| Coaxial coarse (adjustable tension) and fine focusing mechanism with limit stop to prevent the contact between objective and specimen.
Condenser| LWD pre-centered condenser, N.A. 0.30, W.D. 72 mm.
With 4x/10x, 20x/40x phase contrast slider and brightfield.
Removable to extend the working distance up to 150 mm.
Transmitted illumination:| X-LED 8 with white 8 W LED (6,300K) with brightness control. With aperture diaphragm. Multi-plug 100-240Vac/6Vdc external power supply.

IM-3FL4 – HBO Fluorescence Microscope

Advanced inverted microscope for brightfield and fluorescence observations with Semi-Apo IOS LWD U-PLAN F objectives to enhance the visibility of the sample and increase the overall contrast. The HBO fluorescence illuminator provides outstanding flexibility of use, standing the blue and green filter sets (supplied as standard) for Auramine, FITC, GFP and YFP (with blue filter set) plus Rhodamine, Texas Red and TRITC (with the green one), yet giving the possibility to combine any other specific filter sets for future upgrade. Transmitted light through the exclusive X-LED 8 to ensure a great-looking, rich and high-quality specimen view.

Standard filters

Name| Excitation filter (nm)| Dichroic mirror cut-off (nm)| Emission filter(nm)
---|---|---|---
B Blue| 460 – 490| 500| 520LP
G Green| 527 – 553| 565| 575LP

Additional filters (optional)

Name Excitation filter (nm) Dichroic mirror cut-off (nm Emission filter(nm)
V (Violet) 390 – 420 440 455LP
UV 325 – 375 415 435LP
Part Description
--- ---
Observation mode: Brightfield, HBO fluorescence.
Epi-illumination and filter: HBO 100 W high-pressure mercury lamp.

4-position filter holder; blue & green included.
Head:| Trinocular (2-position 100/0, 0/100), 45° inclined.
Interpupillary distance:| Adjustable between 50 and 75 mm.
Dioptric adjustment:| On the left eyepiece tube.
Eyepieces:| WF10x/22 mm, high eye-point and with rubber cups.
Nosepiece:| Quintuple revolving nosepiece, rotation on ball bearings.
Objectives| IOS LWD U-PLAN F 10x/0.30
IOS LWD U-PLAN F 20x/0.45
IOS LWD U-PLAN F 40x/0.65
All with anti-fungus treatment.
Part| Description
---|---
Specimen stage:| Fixed stage, 250×160 mm, with glass and metal stage inserts.
Focusing:| Coaxial coarse (adjustable tension) and fine focusing mechanism with limit stop to prevent the contact between objective and specimen.
Condenser:| LWD pre-centered condenser, N.A. 0.30, W.D. 72 mm.
Removable to extend the working distance up to 150 mm.
Transmitted illumination:| X-LED 8 with white 8 W LED (6,300K) with brightness control. With aperture diaphragm. Multi-plug 100-240Vac/6Vdc external power supply.

IM-3LD2 – LED Fluorescence Microscope
Routine inverted fluorescence microscope for transmitted brightfield, phase contrast, and fluorescence observations with IOS LWD W-PLAN PH objectives. The LED fluorescence illuminators are combined with a blue and green excitation filter set for the visualization of the following fluorochromes: Acridine Yellow, Acridine Orange, Auramine, DiO, DTAF, FITC, GFP, YFP, etc. (blue) plus Rhodamine, Texas Red and TRITC (green). LED fluorescence ensures unparalleled convenience eliminating warm-up/cooldown times and all the inconveniences related to lamp replacement and adjustment. Transmitted light through the exclusive X-LED 8 to ensure a great-looking, rich and high-quality specimen view.OPTIKA IM 3 IM 3 Series Routine Lab Inverted Microscopes - identif
4

Part Description
Observation mode: Brightfield, phase contrast, LED fluorescence.
Epi-illumination and filter: High-power LED with brightness control.

3-position filter holder; blue and green filtesets included.
Head:| Trinocular (2-position 100/0, 50/50), 45° inclined.
Interpupillary distance:| Adjustable between 50 and 75 mm.
Dioptric adjustment:| On the left eyepiece tube.
Eyepieces:| WF10x/22 mm, high eye-point and with rubber cups.
Nosepiece:| Quintuple revolving nosepiece, rotation on ball bearings.
Objectives:| 105 LWD W-PLAN PH 10x/0.25
IOS LWD W-PLAN PH 20x/0.40
105 LWD W-PLAN PH 40x/0.65
All with anti-fungus treatment.

A new milestone achieved in Fluorescence Microscopy
» 10% higher light intensity than HBO
» 35% higher light intensity than Metal-Halide
» Adjustable light intensity
» The selection of filter sets automatically involves the switching on of the corresponding LEDs
» Recommended for routine applications
» Cost-effective, money-saving technology
» Ready for immediate operation
» Eliminate warm-up/cool-down times
» Forget lamp replacement & centering

LED Fluorescence Cubes (LED + Filterset) included

Name| LED emission (nm)| Excitation filter (nm)| Dichroic mirror cut-off nm| Emission filter nm
---|---|---|---|---
Blue| 460| 455 – 495| 500| 510LP
Green| 523| 510 – 550| 570| 575LP
Part| Description
---|---
Specimen stage:| Fixed stage, 250×160 mm, with glass and metal stage
inserts. Mechanical stage as option.
Focusing:| Coaxial coarse (adjustable tension) and fine focusing mechanism with limit stop to prevent the contact between objective and specimen.
Condenser:| LWD pre-centered condenser, N.A. 0.30, W.D. 72 mm. With 4x/10x, 20x/40x phase contrast slider and brightfield. Removable to extend the working distance up to 150 mm.
Transmitted| X-LED 8 with white 8 W LED (6,300K) with brightness control.
With aperture diaphragm. 100-240Vac/12Vdc external power supply.

IM-3LD4 – LED Fluorescence Microscope
Advanced fluorescence inverted microscope for transmitted brightfield and fluorescence observations with IOS LWD U-PLAN F objectives. The extremely powerful LED Fluorescence Illuminators are combined with corresponding excitation filter sets for the visualization of most fluorochromes. LED fluorescence ensures unparalleled convenience eliminating warm-up/cool-down times and all the inconveniences related lamp replacement and adjustment. Transmitted light through the exclusive X-LED 8
to ensure a great-looking, rich and high-quality specimen view.

A new milestone achieved in Fluorescence Microscopy
» Full-modular Fluorescence System
» Interchangeable LED-Filter sets
» 4 LED-Filter sets slots
» 10% higher light intensity than HBO
» 35% higher light intensity than Metal-Halide
» Adjustable light intensity
» The selection of filter sets automatically involves the switching on of the corresponding LEDs
» Recommended for research applications
» Cost-effective, money-saving technology
» Ready for immediate operation
» Eliminate warm-up/cool-down times
» Forget lamp replacement & centering

LED Fluorescence Cubes available (LED + Filterset)

Name| LED emission (nm)| Excitation filter (nm)| Dichroic mirror cut-off (nm)| Emission filter (nm)
---|---|---|---|---
M-1230 – Blue| 460| 455 – 495| 500| 510LP
M-1230.1 – Blue (pass band)| 460| 455 – 495| 500| 518-542
M-1231 – Green| 523| 510 – 550| 570| 575LP
M-1231.1 – Green (pass band)| 523| 510 – 550| 570| 585-625
M-1232 – Violet| 405| 390 – 420| 440| 450LP
M-1233 – UV| 365| 325 – 375| 415| 435LP
M-1233.1 – UV (pass band)| 365| 340 – 390| 405| 420-470
M-1234 – Red 1| 623| 590 – 650| 660| 665LP
M-1235 – Red 2| 623| 595 – 645| 655| 665 – 715
M-1236 – Deep Red| 660| 623 – 678| 685| 690 – 750
M-1237 – Far Red| 740| 720 – 760| 770| 780LP
M-1238 – Amber| 590| 582 – 603| 610| 615 – 645
Part| Description
---|---
Specimen stage:| Mechanical stage, 250×290 mm, with glass and metal stage inserts for slides and 54mm dia. Petri dishes.
Focusing:| Coaxial coarse (adjustable tension) and fine focusing mechanism with limit stop to prevent the contact between objective and specimen.
Condenser:| LWD pre-centered condenser, N.A. 0.30, W.D. 72 mm. Removable to extend the working distance up to 150 mm.
Transmitted| X-LED 8 with white 8 W LED (6,300K) with brightness control. With aperture diaphragm. Multi-plug 100-240Vac/12Vdc external power supply.
Part| Description
---|---
Observation mode:| Brightfield, LED fluorescence.
Epi-illumination and filter:| high -Power LED with brightness control. 14-position filter holder; none included.
Head:| Trinocular (2-position 100/0, 50/50), 45° inclined.
Interpupillary distance:| !Adjustable between 50 and 75 mm.
Dioptric adjustment| On the left eyepiece tube.
Eyepieces:| IWF10x/22 mm, high eye-point and with rubber cups.
Nosepiece:| ‘Quintuple revolving nosepiece, rotation on ball bearings.
Objectives:| IOS LWD U-PLAN F 10x/0.30 IOS LWD U-PLAN F 20x/0.45 IOS LWD U-PLAN F 40x/0.65 II with anti-fungus treatment.

IM-3LD4D – LED Fluorescence Microscope

OPTIKA IM 3 IM 3 Series Routine Lab Inverted Microscopes - COMBINATION
4

Part Description
Observation mode: Brightfield, LED fluorescence.
Epi-illumination and filter: High-Power LED with brightness control.

4-position filter holder; none included.
Head:| Trinocular (2-position 100/0, 50/50), 45° inclined.
Interpupillary distance:| Adjustable between 50 and 75 mm.
Dioptric adjustment:| On the left eyepiece tube.
Eyepieces:| WF10x/22 mm, high eye-point and with rubber cups.
Nosepiece:| Quintuple revolving nosepiece, rotation on ball bearings.
Objectives:| 105 LWD U-PLAN F 10x/0.30
105 LWD U-PLAN F 20x/0.45
105 LWD U-PLAN F 40x/0.65
All with anti-fungus treatment.

Advanced fluorescence inverted microscope for transmitted brightfield and fluorescence observations with IOS LWD U-PLAN F objectives. The extremely powerful LED Fluorescence Illuminators are combined with corresponding excitation filter sets for the visualization of most fluorochromes. LED fluorescence ensures unparalleled convenience eliminating warm-up/cool-down times and all the inconveniences related to lamp replacement and adjustment. Transmitted light through the exclusive X-LED 8 to ensure a great-looking, rich and high-quality specimen view. This model is equipped with an Intel micro PC, a 12” screen, a 6Mpx high-sensitivity color camera, Optika ProView image analysis software for fluorescence, and a wireless mouse and keyboard.
A new milestone achieved in Fluorescence Microscopy
» Full-modular Fluorescence System
» Interchangeable LED-Filter sets
» 4 LED-Filter sets slots
» 10% higher light intensity than HBO
» 35% higher light intensity than Metal-Halide
» Adjustable light intensity
» The selection of filter sets automatically involves the switching on of the corresponding LEDs
» Recommended for research applications
» Cost-effective, money-saving technology
» Ready for immediate operation
» Eliminate warm-up/cool-down times
» Forget lamp replacement & centering

LED Fluorescence Cubes available (LED + Filterset)

Name| LED emission (nm)| Excitation filter (nm)| Dichroic mirror cut-off (nm)| Emission filter (nm)
---|---|---|---|---
M-1230 – Blue| 460| 455 – 495| 500| 510LP
M-1230.1 – Blue (pass band)| 460| 455 – 495| 500| 518-542
M-1231 – Green| 523| 510 – 550| 570| 575LP
M-1231.1 – Green (pass band)| 523| 510 – 550| 570| 585-625
M-1232 – Violet| 405| 390 – 420| 440| 450LP
M-1233 – UV| 365| 325 – 375| 415| 435LP
M-1233.1 – UV (pass band)| 365| 340 – 390| 405| 420-470
M-1234 – Red 1| 623| 590 – 650| 660| 665LP
M-1235 – Red 2| 623| 595 – 645| 655| 665 – 715
M-1236 – Deep Red| 660| 623 – 678| 685| 690 – 750
M-1237 – Far Red| 740| 720 – 760| 770| 780LP
M-1238 – Amber| 590| 582 – 603| 610| 615 – 645
Part| Description
---|---
Specimen stage:| Mechanical stage, 250×290 mm, with glass and metal stage inserts for slides and 54mm dia. Petri dishes.
Focusing:| Coaxial coarse (adjustable tension) and fine focusing mechanism with upper limit stop.
Condenser:| LWD pre-centered condenser, N.A. 0.30, W.D. 72 mm.
Removable to extend the working distance up to 150 mm.
Transmitted illumination:| X-LED 8 with white 8 W LED (6,300K) with brightness control. With aperture diaphragm. Multi-plug 100-240Vac/12Vdc external power supply.
Digital equipment:| Intel micro PC with Image analisys software for Fluorescence. 12” screen; 6Mpx high-sensitivity color camera. Supplied with wireless mouse & keyboard.

IM-3MET- Metallurgical Microscope
Routine inverted microscope with IOS LWD U-PLAN MET objectives for material science and metallographic applications, combining a sturdy yet compact structure
with dedicated components required in this field, like the NCG (no cover glass) objectives working without cover slide ideal for metallographic samples and other
opaque specimens. A particularly simple and ingenious optical design allows stable alignments and smooth and accurate movements.OPTIKA IM 3 IM 3 Series
Routine Lab Inverted Microscopes - metallographic

Part Description
Observation mode: Brightfield, simple polarized light on incident light.

Epi-illumination and
polarizing filters:| Halogen 12 V/50 W with brightness control. With aperture and field (centrable) diaphragms. With polarizer and analyzer.
Head:| Trinocular (2-position 100/0, 50/50), 45° inclined.
Interpupillary
distance:| Adjustable between 50 and 75 mm.
Dioptric adjustment:| On the left eyepiece tube.
Eyepieces:| WF10x/22 mm, high eye-point and with rubber cups.
Nosepiece: _| Quintuple revolving nosepiece, rotation on ball bearings.
Part| Description
---|---
Objectives:| IOS LWD U-PLAN MET 5x/0.15
IOS LWD U-PLAN MET 10x/0.30
IOS LWD U-PLAN MET 20x/0.45
IOS LWD U-PLAN MET 50x/0.55
All with anti-fungus treatment.
Specimen stage:| Fixed stage, 250×160 mm, with metal stage insert.
Focusing:| Coaxial coarse (adjustable tension) and fine focusing
mechanism with limit stop to prevent the contact
between objective and specimen.

IM-3METLD- Metallurgical Microscope
LED routine inverted microscope with IOS LWD U-PLAN MET objectives for material science and metallographic applications, combining a sturdy yet compact structure with dedicated components required in this field, like the NCG (no cover glass) objectives working without cover slide ideal for metallographic samples and other opaque specimens. A particularly simple and ingenious optical design allows stable alignments and smooth and accurate movements. This model is equipped with an 18W LED lighting system.OPTIKA IM
3 IM 3 Series Routine Lab Inverted Microscopes -
Microscope

Part Description
Observation mode: Brightfield, simple polarized light on incident light.
Epi-illumination and polarizing filters: Halogen 12 V/50 W with brightness

control. With aperture and field (centrable) diaphragms. With polarizer and analyzer.
Head:| Trinocular (2-position 100/0, 50/50), 45° inclined.
Interpupillary distance:| Adjustable between 50 and 75 mm.
Dioptric adjustment:| On the left eyepiece tube.
Eyepieces:| WF10x/22 mm, high eye-point and with rubber cups.
Nosepiece:| Quintuple revolving nosepiece, rotation on ball bearings.
Part| Description
---|---
Objectives:| IOS LWD U-PLAN MET 5x/0.15
IOS LWD U-PLAN MET 10x/0.30
IOS LWD U-PLAN MET 20x/0.45
IOS LWD U-PLAN MET 50x/0.55
All with anti-fungus treatment.
Specimen stage:| Fixed stage, 250×160 mm, with metal stage insert.
Focusing:| Coaxial coarse (adjustable tension) and fine focusing mechanism with limit stop to prevent the contact between objective and specimen.

IM-3METLD- Metallurgical Microscope
LED routine inverted microscope with IOS LWD U-PLAN MET objectives for material science and metallographic applications, combining a sturdy yet compact structure with dedicated components required in this field, like the NCG (no cover glass) objectives working without cover slide ideal for metallographic samples and other opaque specimens. A particularly simple and ingenious optical design allows stable alignments and smooth and accurate movements. This model is equipped with an 18W LED lighting system.

Part Description
Observation mode: Brightfield, simple polarized light on incident light.
Epi-illumination and polarizing filters: LED 18 W with brightness control.

With aperture and field (centrable) diaphragms. With polarizer and analyzer.
Head:| Trinocular (2-position 100/0, 50/50), 45° inclined.
Interpupillary distance:| Adjustable between 50 and 75 mm.
Dioptric adjustment:| On the left eyepiece tube.
Eyepieces:| WF10x/22 mm, high eye-point and with rubber cups.
Nosepiece:| Quintuple revolving nosepiece, rotation on ball bearings.
Part| Description
---|---
Objectives:| IOS LWD U-PLAN MET 5x/0.15
IOS LWD U-PLAN MET 10x/0.30
IOS LWD U-PLAN MET 20x/0.45
IOS LWD U-PLAN MET 50x/0.55
All with anti-fungus treatment.
Specimen stage:| Fixed stage, 250×160 mm, with metal stage insert.
Focusing:| Coaxial coarse (adjustable tension) and fine focusing mechanism with limit stop to prevent the contact between objective and specimen.

IM-3 Series – Comparison chart

Common features:
– Head: Trinocular (2-position), 45° inclined.
– Eyepieces: WF10x/22mm, high eye-point.
– Nosepiece: Quintuple, reversed, on ball bearings.
– Stage: Fixed, 250×160 mm (mechanical stage and side extension available as accessories).
– Focusing mechanism: Coaxial coarse (adjustable tension) and fine focusing mechanism with limit stop to prevent the contact between objective and specimen.

Model
IM-3| Type
BF, PH| Objectives
IOS LWD W-PLAN PH
10x, 20x, 40x| Condenser LWD, N.A. 0.30,
iris diaphragm| Incident illumination –| Fluorescence
slider| Transmitted illumination
8 W X-LED8, brightness control
---|---|---|---|---|---|---
IM-3F| BF, FL, PH| IOS LWD W-PLAN 4x,
10xPH, 20PH, 40x| LWD, N.A. 0.30,
iris diaphragm| FL HBO with blue and
green filtersets| 2-position +BF| 8 W X-LED8, brightness control
IM-3FL4| BF, FL| IOS LWD U-PLAN F
10x, 20x, 40x| LWD, N.A. 0.30,
iris diaphragm| I FL HBO with blue and
green filtersets| I 3-position +BF| 8 W X-LED8, brightness control
IM-3LD2| BF, FL, PH| IOS LWD W-PLAN PH
10x, 20x, 40x| LWD, N.A. 0.30,
iris diaphragm| FL LED with blue and
green filtersets| 2-position +BF| 8 W X-LED8, brightness control
IM-3LD4| BF, FL| IOS LWD U-PLAN F
10x, 20x, 40x| LWD, N.A. 0.30,
iris diaphragm| LED Fluorescence
Cubes as optional| 4-position
.| 8 W X-LED8, brightness control
IM-3LD4D| BF, FL| IOS LWD U-PLAN F
10x, 20x, 40x| LWD, N.A. 0.30,
iris diaphragm| LED Fluorescence
Cubes as optional| 2-position| 8 W X-LED8, brightness control
IM-3MET| MET| IOS LWD U-PLAN MET
5x, 10x, 20x, 50x| –| Halogen bulb,
12 V/50 W, brightness
control| –| –
IM-3METLD| MET
a| IOS LWD U-PLAN MET
5x, 10x, 20x, 50x
a| –| LED 18 W, brightness
control| –| –

IM-3 Series – Optical performance
IM-3 / IM-3LD2 / IM-3F

Eyepiece 10x (M-780)
Field number (mm) 22
Objective N.A. W.D. (mm) Total magnification

Field of view (mm)
4x| 0.13| 10.40| 40x| 5.50
10x PH| 0.25| 7.30| 100x| 2.20
20x PH| 0.40| 6.80| 200x| 1.10
40x PH| 0.60| 3.00| 400x| 0.55
60x| 0.70| 1.70| 600x| 0.37

IM-3FL4 / IM-3LD4 / IM-3LD4D

Eyepiece 10x (M-780)
Field number (mm) 22
Objective N.A. W.D. (mm) Total magnification

Field of view (mm)
4x| 0.13| 18.52| 40x| 5.50
10x| 0.30| 7.11| 100x| 2.20
20x| 0.45| 5.91| 200x| 1.10
40x| 0.65| 1.61| 400x| 0.55
60x| 0.75| 1.04| 600x| 0.37

IM-3MET / IM-3METLD

Eyepiece 10x (M-780) 15x (M-601)
Field number (mm) 22 16
Objective N.A. W.D. (mm) Total magnification
Field of view (mm) Total magnification Field of view (mm)
5x 0.15 10.80 50x 4.40
10x 0.30 10 100x 2.20
20x 0.45 4 200x 1.10
50x 0.55 7.90 500x 0.44
100x 0.80 2.10 1000x 0.22

IM-3 Series – Accessories

Eyecups & Eyepieces
M-601 WF15x/16 eyepiece, high eyepoint
M-780 PL10x/22 eyepiece, high eyepoint, with rubber cup
M-781 PL10x/22 micrometric eyepiece, high eyepoint, with a rubber cup
Objectives
IOS W-PLAN
M-1049 IOS W-PLAN objective 2x/0.08
M-782 IOS LWD W-PLAN objective 4x/0.10
M-773 IOS LWD W-PLAN objective 40x/0.60
M-786 IOS LWD W-PLAN objective 60x/0.70
IOS W-PLAN PH
M-782.1 IOS LWD W-PLAN PH objective 4x/0.13
M-783N IOS LWD W-PLAN PH objective 10x/0.25
M-784N IOS LWD W-PLAN PH objective 20x/0.40
M-785 IOS LWD W-PLAN PH objective 40x/0.65

IOS U-PLAN F
M-800 IOS LWD U-PLAN F objective 4x/0.13
M-801 IOS LWD U-PLAN F objective 10x/0.30
M-802 IOS LWD U-PLAN F objective 20x/0.45
M-803 IOS LWD U-PLAN F objective 40x/0.65
M-804 IOS LWD U-PLAN F objective 60x/0.75

IOS U-PLAN F PH
M-1177 IOS LWD U-PLAN F PH objective 20x/0.45
M-1178 IOS LWD U-PLAN F PH objective 40x/0.65
IOS U-PLAN MET
M-1100 IOS LWD U-PLAN MET objective 5x/0.15
M-1101 IOS LWD U-PLAN MET objective 10x/0.30
M-1102 IOS LWD U-PLAN MET objective 20x/0.45
M-1103 IOS LWD U-PLAN MET objective 50x/0.55
M-1104 IOS LWD U-PLAN MET objective 100x/0.80 (dry)
IOS LWD U-PLAN RPC
M-861 IOS LWD U-PLAN RPC objective 4x/0.13
M-862 IOS LWD U-PLAN RPC objective 10x/0.25
M-863 IOS LWD U-PLAN RPC objective 20x/0.40
M-864 IOS LWD U-PLAN RPC objective 40x/0.65
Attachments
M-797 HBO fluo attachment, 2-pos. (B & G filter set), EU (only for IM-3)
M-798 HBO fluo attachment, 4-pos. (B & G filter set), EU (only for IM-3)
Stages
M-792 Mechanical stage
M-792.2 Mechanical stage (for IM-3LD2 only) Condensers & Filters
M-676 Empty fluorescence filter block (only for IM-3F)
M-677 Fluorescence filter set V (filter block included) (only for IM-3F)
M-677.1 Fluorescence filter set V (filter block NOT included) (only for IM-3F & IM-3FL4)
M-677ND Neutral density filter, 25% transmission (only for IM-3F & IM-FL4)
M-678 Fluorescence filter set UV-DAPI (filter block included) (only for IM-3F)
M-678.1 Fluorescence filter set UV-DAPI (filter block NOT included) (only for IM-3F & IM-3FL4)
M-678ND Neutral density filter, 50% transmission (only for IM-3F & IM-3FL4)
M-1230 Blue LED Fluorescence Cube (LED+Filterset), for IM-3LD4
M-1230.1 Blue (passband)LED Fluorescence Cube (LED+Filterset), for IM-3LD4
M-1231 Green LED Fluorescence Cube (LED+Filterset), for IM-3LD4
M-1231.1 Green (passband) LED Fluorescence Cube (LED+Filterset), for IM-3LD4
M-1232 Violet LED Fluorescence Cube (LED+Filterset), for IM-3LD4
M-1233 UV LED Fluorescence Cube (LED+Filterset), for IM-3LD4
M-1233.1 UV (pass band) LED Fluorescence Cube (LED+Filterset), for IM-3LD4
M-1234 Red 1 LED Fluorescence Cube (LED+Filterset), for IM-3LD4
M-1235 Red 2 LED Fluorescence Cube (LED+Filterset), for IM-3LD4
M-1236 Deep Red LED Fluorescence Cube (LED+Filterset), for IM-3LD4
M-1237 Far Red LED Fluorescence Cube (LED+Filterset), for IM-3LD4
M-1238 Amber LED Fluorescence Cube (LED+Filterset), for IM-3LD4
How to connect the cameras to our microscopes.
Please refer to the Adapter reference list on the Digital section.
Camera Adapters
M-113.1 Ring adapter, 30mm (for monocular and binocular microscopes)
M-115 0.35x C-Mount projection lens
M-114 0.5x C-Mount projection lens
M-118 0.75x C-Mount projection lens
M-173 C-Mount projection lens for APS-C/full frame reflex cameras (trino)
M-620 0.35x focusable C-Mount adapter (biological microscopes)
M-620.1 0.5x focusable C-Mount adapter (biological microscopes)
M-620.2 0.65x focusable C-Mount adapter (biological microscopes)
M-620.3 1x focusable C-Mount adapter (biological & stereomicroscopes)
M-699 Universal adapter for C-Mount projection lens (trino)
Miscellaneous
15104 Cleaning kit
DC-004 TNT dust cover, large, 700(l)x550(h) mm
M-005 Micrometric slide, 26x76mm, with 2 scales (1mm/100 & 10mm/100)
M-151 HBO 100W high-pressure mercury bulb for fluorescence (only for IM-3F & IM-3FL4)
M-151.1 HBO 100W high-pressure mercury bulb for fluorescence (OSRAM) (only for IM-3F & IM-3FL4)
M-622 Halogen bulb 12V/50W (only for IM-3MET)
M-785.2N Slider with phase rings (4x/10x, 20x/40x, BF) (except for IM-3MET)
M-793.1 Holder for Petri 38mm diameter (M-793.2 needed) (except for IM-3MET)
M-793.2 Holder for Terasaki and Petri 65mm diameter (except for IM-3MET)
M-793.3 Holder for slides and Petri 54mm diameter (except for IM-3MET)
M-793.4 Holder for 2+2 slides (except for IM-3MET)
M-793.5 Holder for metallurgical samples (only for IM-3MET)
M-793.6 Holder for Utermohl-Chamber (M-793.3 needed) (except for IM-3MET)
M-793.7 Load bearing side extension
M-860 Slider with rotating 10x-20x-40x OPTIKA Modulation Contrast slit
M-860.1 Slider with rotating 4x OPTIKA Modulation Contrast slit
M-1004.N Centering telescope, 30mm diameter
VP-IM3 IQ/OQ/PQ manual for IM-3 series
AB-030 Antibacterial surface treatment, only for newly purchased microscope
15104 – Cleaning kit
It cleans glass quickly and effectively, without leaving residue or odor. Ideal for precision lens or prism cleaning. 4 Cleaning kit s glass quickly and effectively, leaving residue or odor. r precision lens or prism cleaning.OPTIKA IM 3 IM 3 Series Routine Lab Inverted Microscopes -
FACILITATE 5

v 6.7 – OPTIKA reserves the right to make corrections, modifications, enhancements, improvements, and other changes to its products at any time without notice.
Headquarters and Manufacturing Facilities
OPTIKA® S.r.l. Via Rigla, 30 – 24010 Ponteranica (BG) – ITALY –
Tel.: +39 035.571.392 – info@optikamicroscopes.com
Optika Sales branches
OPTIKA® Spain spain@optikamicroscopes.com
OPTIKA ®China china@optikamicroscopes.com
OPTIKA® India india@optikamicroscopes.com
OPTIKA  ® USA usa@optikamicroscopes.com
OPTIKA® Central America camerica@optikamicroscopes.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals