WAVES V13 Nx Ocean Way Nashville Acoustic and Monitoring System User Guide

WAVES V13 Nx Ocean Way Nashville Acoustic and Monitoring System

Product Overview

Ocean Way Nashville is a unique place to make music. It has an unusual history and an equally unusual location. The story began when Gary Belz, who ran House of Blues Studios, teamed up with Ocean Way Hollywood owner Alan Sides to create a dream facility in Nashville. For this they needed a dream location, which they found in a gothic revivalist church dating from 1910. Belz and Sides combined their formidable experience and resources to create a facility like none other. Each studio boasts a remarkable list of outboard gear, classic mixing consoles, and control room acoustics built with Ocean Way Audio HR1 and HR5 studio monitors in mind—making these some of the best-sounding control rooms in the world.

In 2001, Ocean Way Nashville became part of Belmont University. It continues as a world-class studio, serving the likes of Beck, George Strait, Lionel Richie, Vanessa Williams, Bob Seger, and Dolly Parton, as well as orchestral scoring for films, television, and games. The studio is also a learning space. Belmont students work alongside Ocean Way Nashville’s celebrated audio engineers, learning the perfect mix of tradition and technology.

Waves Nx Ocean Way Nashville is a headphone monitoring tool that enables you to monitor your mix in the precise acoustic space of an Ocean Way Nashville control room. It uses state-of-the-art psychoacoustic modeling of human hearing to achieve a natural, immersive, and transparent three-dimensional sound field over stereo headphones. Paired with your favorite headphones, the plugin provides a meaningful reference point for stereo mixes monitored on headphones. You can make mix decisions as though you were sitting in the mix engineer’s chair, and confidently judge depth, panning, stereo image, balance, and reverb. When you hear the mix played back in a speaker environment, you won’t be surprised.
To provide greater immersion when mixing on headphones, Nx Ocean Way Nashville incorporates the Nx HeadTracker, which changes your stereo headphones into a real-world spherical space. It recreates a room in your headphones that behaves like the real room. Nx Ocean Way Nashville does not change the processing of the mix itself, but rather the environment in which you monitor it. Plugin output is always a binaural stereo headphone signal containing all the acoustic elements of the Ocean Way Nashville control room.

1. This plugin uses impulse responses from the Ocean Way Nashville Studio B control room. We feel that this control room provides the ideal environment for virtual mixing with Nx. The image in the plugin shows Ocean Way Nashville Studio A. Since this is a unique recording space, we couldn’t help but let you see it.

Getting Started

Here are the essential steps for setting up Nx Ocean Way Nashville. Each step is described in detail in later chapters.

1. INSERT THE PLUGIN
   Insert one instance of the plugin on your master buss. Note: don’t use Nx Ocean Way Nashville on individual tracks).
   Before you bounce the final mix, make sure that the Ocean Way Nashville plugin is bypassed.

2. ESTABLISH THE CHARACTERISTICS OF YOUR HEADPHONE MONITORING
   Studio Monitors
   There are two loudspeaker types. This selection affects your perception of the sound of the speaker itself, as well as its interaction with the room. Refer to Studio Monitor Select in the next section.
   Headphone EQ Curve
   You have the option of applying a standardized EQ correction curve to your headphone signal. Refer to Selecting a Headphone EQ Curve, later in this user guide.

3. SET UP HEAD TRACKING
   Head Tracking is an important feature that coordinates your head movements with the sound imaging of the Studio. It provides the same aural feedback that you experience in the studio—the information you need to make vital mix and sound field decisions. To get the most from Nx Ocean Way Nashville, we recommended that you always work with Head Tracking on. Refer to Head Tracking, later in this user guide.

Nx Ocean Way Nashville Controls

Studio Monitors Select
Control rooms at Ocean Way Nashville are outfitted with two sets of studio monitors. Both are manufactured by Ocean Way Audio.

HR1

| This is the flagship of the Ocean Way Audio studio monitor series. The HR1 monitors have a nearly unlimited dynamic range, ultra-low distortion, and incredibly wide dispersion. They are huge, and there’s really nothing quite like them.

Meters

INPUT METERS
The stereo input signal has a full-scale meter with an infinite-hold clip indicator. Click on the clip indicator to reset it. Each channel has mute and solo buttons at the bottom of the input meter.
Range : -infinity to 0 dBFS

MONITOR LEVEL AND METERS

The binaural stereo headphone output is represented by a full-scale stereo meter with infinite-hold clip indicators. Use the knob below the meter to control the headphone monitor level.
Range : -infinity to 0 dBFS
Output volume control: -24 dBFS to +6 dBFS; Default: 0 dBFS.

Please note: Nx can introduce clipping at the output, especially when fed with a signal whose levels are controlled by a limiter. In such cases, use the output gain fader to reduce the output.

Rotate Studio

The Rotate Studio wheel rotates the studio around your position at the mixing desk. What you see and what you hear are defined by your orientation. This is what you experience when using head tracking, except that Rotate Studio is controlled manually. Click the 0º button, or Alt+Click on the Rotate Studio wheel, to reset rotation to its default position.

Ambience

increases or decreases the amount of ambiance in the room, compared with the model. The specific and accurate sound signature of the Ocean Way Nashville control room is modeled with impulse responses (IR). When you select a studio monitor type, the associated IR loads. This IR describes everything about the room: the speakers and how they interact with the space, the reflections, and the ambience of the space itself.

The Ambiance control lets you adjust room ambience to taste. The default Ambience setting of 100% presents the modeled room ambience exactly as captured by the IR. By increasing or decreasing the Ambience setting, you can subjectively alter the amount of room ambience. Your monitoring reference will no longer precisely match the Ocean Way Nashville control room, but it will provide a personalized mixing environment. Range: -60% to 160%

Use the bar at the top of the plugin to save and load presets, compare settings, undo and redo steps, and resize the plugin. To learn more, click the icon at the upper-right corner of the window and open the WaveSystem Guide.

Head Tracking

When Head Tracking is on, the virtual room does not move. Instead, it’s you—your headphones—that changes the orientation. This is how you experience a sound in the three-dimensional world. This interaction with the studio space is vital in making critical imaging decisions. The wireframe head indicates the orientation of the engineer’s head with respect to the studio. The head is grayed out when the user’s head is outside the tracking range, when there is insufficient ambient light for camera tracking, or when Head Tracking is turned off. When Head Tracking is off, the soundscape moves with you as you turn your head. This is normal stereo headphone behavior.

Head Tracking Controls

HEAD TRACKING ON/OFF
Toggles Head Tracking on or off. This does not affect Nx sound processing, which is always active.

TRACKING DEVICE MENU
Use this drop-down menu to select the device used for head tracking. Nx Ocean Way Nashville can track head movement from two sources: Camera and Nx Head Tracker.

CAMERA: activates computer’s camera for head tracking. If more than one camera is available, choose from the list.
NX HEADTRACKER: selects the Nx HeadTracker that will be used by Nx Ocean Way Nashville. Choose one HeadTracker from the list.
SENSOR FUSION: mode uses the selected camera and one of the available Nx Head Trackers together. Using these two kinds of sensors simultaneously yields a tracking rate of up to 80 fps.
SETTINGS: takes you to the HeadTracker application’s control panel. Use it to reopen the application if it has been closed or if you want to tweak certain HeadTracker controls.
Please note: The Sensor Fusion mode can be used by only one person at a time. That is, the camera must be aimed at the person who is wearing the Nx Head Tracker

CALIBRATE defines your head position as the center position. Hold your head centered, look straight forward, and click the button to let the system know where your center listening position is. Each time you start the system or change either your position or the camera’s placement, you can recalibrate.

RATE indicates the rate of head tracking in frames per second (fps). The optimal rates are:

• Camera: 25 fps–30 fps
• Nx Head Tracker: 35 fps–50 fps
• Sensor Fusion: 45 fps–80 fps

When you are not using the Sensor Fusion mode, you can have several instances of the Nx Virtual Mix Room plugin with a different tracking device for each instance. This will enable you to have more than one Nx listeners with individual head tracking for each in the same session. Note that each Nx Virtual Mix Room plugin needs to be routed to a separate headphone output per listener; a simple headphone split will not work for this use case.

Head Modeling

You can significantly improve the accuracy of the Nx psychoacoustic effect by providing your head measurements: circumference around your head (over the ears) and a half circle from ear to ear, over the back of your head. Nx is a binaural effect, so it incorporates these measurements to calculate the inter- aural delays, filters, and gains for each ear. If you do not provide these measurements, the default settings will be used.

Please note : Entering values completely unrelated to your personal head measurements will compromise the effect. If you do not enter your individual measurements, it is advised that you use the default values.

UNITS
Choose head measurement units: centimeters or inches.

CIRCUMFERENCE
To find your head circumference, use a measuring tape to measure the longest distance around your head: over the back of the head, around your ears, and around your eyebrows. Enter values directly by dragging up or down over the value box.

Default : 55 cm / 21.6 in (average adult circumference)
Range : 35 cm to 75 cm / 13.8 in to 29.5 in

EAR-TO-EAR is the distance from ear to ear around the back of your head, on a plane parallel to the floor.

Default : 25 cm / 9.8 in (average adult ear-to-ear measurement)
Range : 15.0 cm to 40 cm / 5.9 in to 15.8 in.

Head Measurements Presets
Head modeling measurements can be saved as user presets. This makes it easy to change between mixers, for several people to participate in the mix, and to move your head tracking measurements from one system to another. Click on the arrow next to the Units panel to open the Head Modeling menu. Use this menu to save and load measurement presets.

When you open or enable the plugin, the factory preset is loaded. This sets the head measurements to their default values, even if the host session includes measurement settings. If you have saved your settings as the default preset, this will load when the plugin is opened or activated. You can also create user presets and add them to the Preset menu. Save a preset to a new file to move it to another host. Click the HELP BUTTON (?) to learn more about head modeling.

The Head Modeling menu is used to save and load measurement presets only. These presets do not contain settings for the plugin as a whole. Plugin presets are managed with the WaveSystem toolbar at the top of the interface. General presets do not affect the Head Modeling settings. To learn more, click the icon at the upper-right corner of the window and open the WaveSystem Guide.

Selecting a Headphone EQ Curve

Nx Ocean Way Nashville lets you monitor your stereo mix through headphones—with the loudspeakers and the room acoustics of this famous studio. It does not, however, affect the color of the mix. In order to create a headphone mix that reliably translates to other spaces, you may choose to modify the EQ curve of your headphones. If you are familiar with the way your headphone mixes sound elsewhere, turn off Headphone EQ.

The Headphone EQ section provides EQ correction curves for specific popular headphone models. These curves are based on precision headphone measurement data provided by www.headphone.com.
Use this feature only if you are working with one of the specific headphone models provided in the menu. Otherwise, we recommend that you leave it set to “None.”

The Head Tracking Application

Waves Nx is the engine behind Ocean Way Nashville. Nx creates the space and converts stereo audio channels into a binaural headphone signal. NX HeadTracker is the Nx utility that uses camera and/or Bluetooth Head Tracker information to interpret the mix engineer’s head movements. The Nx application opens or closes automatically when you open or close the Nx Ocean Way Nashville plugin. If the application closes, head tracking will stop. This will not affect the plugin or your DAW in any way; you can restart the application and re-establish head tracking. Click the Settings button in the Nx Ocean Way Nashville Head Tracking section to bring the application forward or to reopen it if it’s been closed. The Camera Tracker and The Bluetooth Tracker are set up on separate tabs.

Camera Tracker Tab

ON/OFF SWITCH lets you turn camera tracking on for tracking or off to save CPU resources. This switch corresponds to the Head Tracking On/Off switch on the plugin.
CAMERA SELECT MENU selects the camera to track with if you have more than one camera connected to the computer. You can also select a camera in the Head Tracking panel of the plugin.
RESET FACE DETECTION resets the face detection algorithm. Reset face detection whenever you change users or if you suspect that the tracking sensor is not tracking correctly.
LOW LIGHT MODE increases the frame rate in poor lighting conditions. It is available only when you are working with a “FaceTime HD” camera built into certain MacBook Pro computers.

FRAME RATE INDICATOR displays the current frame rate. Higher frame rates indicate greater tracking resolution, and therefore greater tracking accuracy.
TRACKING DATA value boxes display the continuously refreshed head positions captured by the camera tracking device.

The Camera Tracker can follow motion on these axes: yaw, pitch, roll, x-axis, y-axis, and z-axis. Each type of motion is illustrated in the head diagrams.

Bluetooth Tracker Tab
The Bluetooth Tracker tab is used to connect Nx Head Tracker devices.

DEVICE LIST shows all available Nx Head Tracker devices, and indicates their status (Connected, Disconnected, Connecting, Unavailable). Up to seven Nx Head Tracker devices can be detected and connected simultaneously.
CONNECT (check box) – Check or uncheck this box in order to connect or disconnect an Nx Head Tracker device that appears in the device list.
REFRESH DEVICE LIST clears the list and rescans for Nx Head Tracker devices.
OPEN BLUETOOTH SETTINGS is used to manually un-pair a device when needed as a troubleshooting step.

RENAME lets you rename your Nx Head Tracker device. Renaming is permanent. The device will advertise itself with the new user-defined name.

1. Click the “Rename” button. A text box will open.
2. Enter a new name for the Nx Tracker device, between five and fifteen characters, and click OK. This process can take up to three minutes.
3. The device will restart and reconnect automatically with the new user-defined name. This process can take up to twenty seconds to complete.
   UPDATE initiates a firmware update on the selected Nx Head Tracker device. A message in red text will appear when a firmware update is available. If a firmware update is available, click Update. A dialogue box will open; follow its instructions to complete the update procedure.
   IDENTIFY causes a light on the selected Nx Head Tracker device to blink. This helps to identify the specific head tracking device when you have more than one connected.
   FW VERSION displays the current Head Tracker device firmware version.
   AUTOMATIC CONNECT automatically creates a connection with any Nx Head Tracker device (when On). When Automatic Connect is unchecked, the application will automatically detect Nx Head Tracker devices and add them to the list, but the user will have to initiate the connection using the Connect button in the list. We suggest that you select Off when there are several available Nx Tackers on different systems, in order to have better control of which system works with each Nx Head Tracker. This control is On by default.
   TRACKING DATA value boxes display the continuously refreshed head positions captured by the Bluetooth tracking device.

The Bluetooth Tracker can follow motion in these directions: yaw, pitch, and roll. Each type of motion is illustrated in the head diagrams.

Setting Up the Nx Head Tracker

CONNECTING THE NX HEAD TRACKER

1. Mount the Nx Head Tracker on top of the headphone band, with the logo facing forward. Nx Head Tracker L and R identification should have the same orientation as the L and R on your headphones. Inaccurate positioning of the Nx Head Tracker will result in inaccurate head tracking.
2. Power up the Nx Head Tracker device. Make sure your computer’s Bluetooth is on and that it supports Bluetooth Low Energy (BLE). The head tracking application will automatically connect to the Nx Head Tracker(s).
3. Select a Head Tracker device from the drop-down Tracking Device menu.
4. To take a device online or offline, rename it, or check battery status, go to the Bluetooth tab of the Nx Head Tracker app. You can bring Nx Head Tracker to the front by clicking the Settings button on the Nx Ocean Way Nashville interface.
5. Calibrate Head Tracking in the Nx Ocean Way Nashville plugin.

BASIC OPERATION

1. Move your head left and right, then up and down, to confirm that the virtual head in the Nx Ocean Way Nashville interface moves in sync with you. Note that, with some DAWs, you will need to play a bit of audio for the virtual head to wake up.
2. Position yourself where you want to be located while you mix. Press the Calibrate button in the Head Tracking section. This will now be your center position in the studio.
3. Listen to some program material, preferably a high-quality reference that you’re familiar with. Take a few minutes to let your ears adjust to the effect.
   The default values of the plugin’s controls are a good place to start. You should now be ready to monitor a mix through your headphones as though you’re sitting in the mixer’s chair at Studio 3 and to use head tracking to realistically experience the three-dimensional space.

Troubleshooting Guide

on in the plugin interface.

2.      Check if tracker app is running.

3.      Play audio through the plugin (plugin on CPU).

4.      Check tracking rate box in plugin GUI.

Head tracking application is not running| 1.      Restart head tracking through the plugin.

2.      Inactivate/reactivate plugin.

Low tracking rate in the head tracking app (<20 fps) (Camera)| 1. Improve lighting conditions.

2.      In MacBook only, select “low light” mode in the tracker app.

3.      Point the camera up slightly for a brighter frame.

4.      Make sure that your face is well lit and not shadowed.

Low tracking rate in Ocean plugin interface (<20 fps) (Camera)| 1. Check the tracking rate in the head tracking app.

2.      Verify audio buffer size is 1024 samples or lower.

Head tracking app often loses track of your head (Camera)| 1. Position the camera closer and straight in front of your face.

2.      Remove sunglasses, hat or anything covering your face.

3.      Improve lighting conditions.

4.      Stay within +/-30 degrees off the center of the camera.

5.      Make sure you’re no further than 5-6 feet away from camera.

Nx Head Tracker will not connect

(Windows only)

| Make sure that the Nx Head Tracker is NOT currently paired to your computer in the Bluetooth Settings menu. If it is paired with the computer, remove it manually.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>