Playtive IAN 446428_2307 Nest Swing Instruction Manual
- August 2, 2024
- Playtive
Table of Contents
Playtive IAN 446428_2307 Nest Swing Instruction Manual
IAN 446428_2307
Congratulations!
You have chosen to purchase a high-quality product. Familiarise yourself with
the product before using it for the first time.
Read the following instructions for use carefully.
Use the product only as described and only for the given areas of
application. Store these instructions for use carefully. When passing the
product on to third parties, please also hand over all accompanying documents.
Package contents (Fig. A)
1 x nest swing, disassembled (1–4)
4 x cable with adjustment lug and suspension elements (5)
1 x instructions for use
Technical data
Maximum weight limit of the product: 150kg
Height adjustable: approx. 105–180cm
Dimensions: approx. 167 x 71cm
Grease suspension hooks and eyelets with waterproof machine oil
Check rings, hooks and eyelets regularly
Date of manufacture (month/year): 12/2023
Delta-Sport Handelskontor GmbH hereby declares that this product meets the following basic requirements, as well as other important regulations: 2009/48/EC – Toy Safety Directive
Intended use
This product is a toy for private use and for children aged 3 years and above.
The product may not be used in public facilities such as playgrounds, schools,
etc.
****Safety information
- Warning. The packaging and mounting mate- rials are not a constituent part of the toy and they must be removed in all cases for safety reasons before the product is given to children to play with.
Risk of injury!
- Warning. Not suitable for children under 36 months. Risk of falling.
- Warning. Not suitable for children under 36 months. Strangulation hazard. Long cord.
- Warning. Only for domestic use.
- Warning. The distance between the swing seat and the ground must be at least 35cm.
- Warning. Intended for outdoor use.
- Children may only play with the product under adult supervision.
- Maximum weight limit of the product: 150kg.
- The swing may only be mounted on fixtures with sufficient stability (solid wood frames, metal frames or concrete ceilings).
- Adult assembly required. Ensure that the product and all components are not given to children until after assembly.
- Mount the swing only as described in this manual. Other mounting methods could damage the cables or mounting materials.
- Before each use, an adult must inspect the mounting of the cables, protective covers, side reinforcements, hooks and rings, to avoid injuries caused by defective parts. As soon as the swing’s mounting elements show defects, the swing must not be used anymore. Check also whether all screws and nuts are tightened firmly before each use and tighten them if necessary.
- All covers of screws and sharp edges must be checked by an adult before each use and replaced if necessary.
- Defective parts should only be replaced with original spare parts and according to the manufacturer’s instructions.
- The swing must not be mounted near steps.
- Mount the swing far enough away from other objects so that no one can be injured. In doing so, consider the radius the swing will reach when it is swinging.
- Make sure there are no sharp-edged or hard objects within the swinging area.
- Do not mount the swing above concrete, asphalt or other hard surfaces.
- Use the appropriate mounting materials for mounting the swing onto wood or metal frames or concrete ceilings (see ‘Mounting the swing’).
- When mounting on wooden frames or wooden beams, the mounting hook must pass all the way through the wood and be secured with a nut from above.
- Make sure your child does not wear a helmet or clothing with cords when using this product, as these may get caught and the child could be injured.
- Do not jump off the product while it is swinging. Only get off the swing when it has come to a complete stop.
- Ensure there is enough space around the product from objects and other people, so that no one can be injured.
- The product should be a suitably safe distance of at least 2m away from buildings, stairs, fences, walls, water, overhanging branches, washing lines, electrical wires and other obstacles.
- Be aware that the product can heat up in intense sunlight.
- No technical alterations may be made to the product.
Mounting the swing
Before using the product for the first time, use a commercially available, waterproof machine oil to grease the metal suspension rings on the nest swing as well as the customer-supplied mounting hooks, which are subject to constant friction.
- Select a level and clean surface with enough room to assemble the product.
- Lay the seat cover (1) out on the floor.
- For each side, connect one side tube with a locking pin (3) to one without a locking pin (4) (Fig. B).
- Guide the connected side tubes (3/4) and the corner tubes (2) through the loops around the edge of the seat cover (1) (Fig. C).
- Lay the cables with the suspension elements (5) between the ends of the tube (2), (3/4). The protrusion (5a) at the suspension element must show at the thinner end of the side tubes (3/4) (Fig. D).
- Connect the tubes (2), (3/4) together. To do this, press the locking pins (3a/4a) at the thinner end of the side tube down, guide the thin end through the protrusion (5a) and then into the thicker end (2) (Fig. D).
Note : the parts are correctly locked when the locking pin is audibly
engaged.
Important : only mount the swing on fixtures where you can guarantee
sufficient stability with absolute certainty. For mounting, use commercially
available swing hooks with min. 10mm thickness and a safety function to
prevent unintentional release. When mounting on wooden beams, the attachment
must pass all the way through the wood and be secured with a nut from above to
ensure a sufficiently secure connection.
Various mounting hooks
Note: to mount the product, you need two mounting hooks, to which two
cables on each of the long sides are attached.
Only mount the swing on suitable mounts.
These are:
No. 1: closed mounting eyelets that are attached to the swing elements with
carabiner hooks (Fig. E).
No. 2: commercially available swing hooks with a safety function that prevents
unintentional release (Fig. F).
Note! The eye of the mounting eye- lets (A) must be aligned transversely to
the swinging direction so that the swing’s mounting element is not dam- aged
too much during use.
Note: observe the direction of oscillation as shown in Fig. I.
Setting the height of the swing
The height of the seat can be adjusted at the ring at the top of the swing. After you have set the length of the cable, it will tighten again under load (Fig. G). Adjust the length of both cables so the swing is perfectly balanced.
Maintenance (Fig. H)
Regularly check that the product’s rings, hooks and lugs are in perfect condition, and grease the product’s suspension rings as well as the customer- supplied suspension hooks with commercially available, waterproof machine grease. Alternatively, use chain lubricant.
Storage, cleaning
When not in use, always store the product clean and dry at room temperature.
Clean only with water and wipe dry afterwards with a cloth.
IMPORTANT! Never clean the product with harsh cleaning agents.
Disposal
Dispose of the product and packaging materials in accordance with current local regulations. Store the packaging materials (foil bags, for example) out of the reach of children. For further information about disposal of the product no longer needed, contact your local council. Dispose of the product and the packaging in an environmentally friendly manner.
The Recycling Code distinguishes different materials to be returned for recycling. The Code consists of the recycling symbol for the recycling process and a number that identifies the material.
Notes on the guarantee and service handling
The product was produced with great care and under continuous quality control.
DELTA-SPORT HANDEL SKONTOR GmbH gives private end customers a three-year
guarantee on this product from the date of purchase (guarantee period) in
accordance with the following provisions. The guarantee is only valid for
material and manufacturing defects. The guarantee does not cover parts that
are subject to normal wear and tear and that are thus considered wear parts
(e.g. batteries) and it does not cover fragile parts such as switches or parts
that are made of glass. Claims under this guarantee are excluded if the
product has been used incorrectly, improperly, or contrary to the intended
purpose, or if the provisions in the instructions for use were not observed,
unless the end customer proves that a material or manufacturing defect exists
that was not caused by one of the aforementioned circumstances.
Claims under the guarantee can only be made within the guarantee period by
presenting the original sales receipt. Please therefore keep the original
sales receipt. The guarantee period is not extended by any repairs carried out
under the guarantee, under statutory guarantees, or as a gesture of goodwill.
This also applies to replaced and repaired parts.
If you wish to make a claim please first contact the service hotline mentioned
below or contact us by e-mail. If there is a guarantee case, then the product
will be repaired or replaced free of charge to you or the purchase price will
be refunded, depending on our choice. There are no further rights from the
guarantee.
Your legal rights, in particular guarantee claims against the respective
seller, are not limited by this guarantee.
AN: 446428_2307
Service Great Britain
Tel.: 0800 404 7657
E-Mail: deltasport@lidl.co.uk
Service Ireland
Tel.: 1800 101010
E-Mail: deltasport@lidl.ie