SIRUI SR-PJ125QSG Anamorphic Adapter User Manual
- June 3, 2024
- SIRUI
Table of Contents
SIRUI SR-PJ125QSG Anamorphic Adapter
Names of Parts
Instructions
-
When paired with 24mm-60mm base lens:
If the max aperture of the base lens is larger than 2.8, it is recommended to set the aperture to 2.8 or 2.9. If the base lens is not very sharp and its max aperture is smaller than 2.8, it is recommended to stop the lens down by half a stop or 1 stop. -
When paired with 60-135mm base lens:
If the max aperture of the base lens is larger than 2.8, tt is recommended to set the aperture to 2.8 or 2.9. If the image is not sharp enough, try stopping the lens by haff a stop or 1 stop. If the max aperture of the base lens is smaller than 2.8, tt is recommended to stop the lens by half a stop or 1 stop. The longer the focal length, the more you should stop down the lens.
For example, if you have a 135mm lens, tt is recommended to stop the lens down by 2 stops or more to get the best performance.
Features
- Attach the adapter to spherical lenses to transform them into 1.25x anamorphic lenses. Or pair the adapter with anamorphic lenses to increase their squeeze factors.
- The adapter has an 82mm rear thread. Three step-down rings (67mm, 72mm, 77mm) and a step-up ring (92mm) are available for working with a wide range of lenses.
- Constant squeeze ratio eliminates the “anamorphic mumps” effect.
- Set the base lens to infinity focus and focus with the adapter.
- Compact and portable.
Super Easy To Use
- STEP 1: Screw the adapter onto the base lens. Make sure the logo and the button faoe straightly upwards.
- STEP 2: Set the base lens to infinity focus and focus with the adapter. Fine-tune the focus ring of the base lens if the subject is not in focus.
- STEP 3: If the lens flares do not appear horizontal, you can overlay the gridlines on the camera screen, push the button, and fine-tune the adapter until the flares become horizontal.
- STEP 4: Rotate the adapter to remove it (Do not push the button).
- A stepping ring should be attached to the front of the base lens if the lens doesn’t have an 82mm filter thread.
Product Precautions for Normal Use
- Please avoid any long-term exposure to the lens in a wet environment which may produce mold and rust on the lens. Store the lens in an airtight cabinet with a drying agent. For other options, contact your SIRUI rep for information on a SIRUI High Performance Humidity Control Cabinet or visit www.sirui.com.
- Do not touch the lens glass surface with your fingers. GenUy remove dust and dirt with a cleaning doth or lens brush. Wipe off fingerprints with lens cleaning products and a lens cloth. Do not clean the lens with general household cleaners.
- Please avoid using the lens in the rain or near water as this may damage the lens and void the warranty.
- When transporting the lens from a hot and cold environment, please place the lens into a lens case or a commercial camera bag. When removed, allow the lens some time to adapt to the new temperature as the lens interior may develop condensation if not.
Compatibility
Specifications
Documents / Resources
|
SIRUI SR-PJ125QSG Anamorphic
Adapter
[pdf] User Manual
SR-PJ125QSG Anamorphic Adapter, SR-PJ125QSG, Anamorphic Adapter, Adapter
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>