SW-MOTECH 10061280 SysBag 30 Side Bag System Instruction Manual
- June 3, 2024
- SW-MOTECH
Table of Contents
SW-MOTECH 10061280 SysBag 30 Side Bag System
Contains
- KFT.05.067.20000/B
- SYS.00.001.13000
- SYS.00.003.10000L/B
- SYS.00.003.10000R/B
- BC.SYS.00.003.10000
Mounting Instructions
- This product is designed only for mounting on vehicles in their original condition. We do not guarantee compatibility with accessories from other manufacturers.
- German safety regulations require that no metal edge with a radius of less than 2.5 mm be exposed while driving a motorcycle. The side carriers should not be used when luggage is not attached to them.
- SW-MOTECH products should be installed by a qualified, experienced motorcycle technician. If you are unsure of your ability to properly install a product, please have the product installed by your local motorcycle dealer. SW-MOTECH takes no responsibility for damages caused by improper installation.
- All screws, bolts and nuts, including all replacement hardware provided by SW-MOTECH, should be tightened to the torque specified in the OEM maintenance manual for your motorcycle. If no torque specifications are provided in the OEM maintenance manual, the following torques may be used:
- All screws, bolts and nuts should be checked regularly to ensure that all are tightened to the proper torque. Medium strength liquid thread-locker (i.e., “Locktite “) should be used to secure all screws, bolts and nuts.
- Maximum load: 12.5 kg (27.5 lbs) per side carrier 0nclusive case and adapter kit). The manufacturer’s maximum load of the motorbike is still valid. Maximum speed with mounted cases: 130 km/h (So mph).
Subject to change. Not responsible for typos.
SPARE PARTS
Mounting
STEP 1
INFORMATION
- For mounting the SW-MOTECH ALU-RACK together with the QUICK-LOCK EVO Side Carrier, exclude/remove spacers (14) an (17) and install the ALU-RACK in their place.
- Attention: Please note, that the holes for the license plate are not specified by the manufacturer. So it will be neccessary to drill new screw holes for the cross girder.
STEP 2
Use a screwdriver to attach/ detach the quick fasteners of the QUICK-LOCK EV0 Side Carriers. Attach the quick fasteners at the fixing points marked with the quick fastener- symbol.
Adapter kit for SysBag
- Thank you for choosing this premium product from SW-MOTECH. Please visit our webshop for additional information, such as application charts and PDF mounting instructions. Any other documents that may be required (e.g. ABE certifications), are also available for download at our webshop.
- Installation and/or maintenance of this product require good technical understanding! For your own safety SW-MOTECH recommends having installation and/or servicing carried out by a specialist workshop! SW-MOTECH assumes no liability for damage caused by improper installation and/or maintenance work!
- Carefully follow all the directions given in the mounting instructions and pay attention to all relevant information in the vehicle manual during assembly. Nonconformance can lead to vehicle damage or even endanger the driver! These mounting instructions are written based on our current state of knowledge. Legal requirements for accuracy do not exist.
- This product was developed for vehicles in their factory setting. Compatibility with original accessory parts or other manufacturers” accessory parts is not guaranteed.
- Furthermore, BEFORE installing this product, make sure that all moving parts (e.g. the chain) are in the original state of maintenance. Installed accessories can change the driving behaviour and/or stability of your vehicle.
GENERAL INFORMATION
Observe the country-specific regulations concerning vehicle registration/ operation as well as TUV regulations if applicable. If required, register installed parts in the vehicle documents through an appropriate inspection authority.
-
PREPARATION: Read the mounting instructions carefully and make sure that all items of the parts list are included. Make sure that your vehicle is parked safely and cannot fall over. Turn off the engine and remove the ignition key. Let the motor/exhaust cool off if necessary. Disconnect the vehicle battery when working on the electrical system. Use appropriate tools. Have another person to help you.
-
MOUNTING: All parts and connections removed from the vehicle must be reinstalled in accordance with the vehicle manufacturers· specifications or replaced by parts delivered by SW-MOTECH. Secure all threads, unless otherwise specified, with medium-strength liquid thread locker.
Torque specifications undefined by SW-MOTE CH must be obtained from the vehicle manufacturer or by a specialist workshop! -
FUNCTION CHECK : After installation make sure that all parts and connections previously removed are properly replaced. Also make sure that no moving parts are obstructed and no function of the vehicle is hindered in any way. Cables and hoses must not rub and/or be pinched. Before starting to ride, perform a comprehensive check of all functions. After the first 50 km and then at regular intervals, check the tightening torque of all screw connections and the proper fit of the product.
PARTS LIST
Al! measurements in millimeters.
- The second number indicates the total quantity of the part in the delivery.
- No torque specifications: Use the torque defined by vehicle manufacturer! The standard torque in this table can be used as long as it is within the vehicle manufacturer s specifications.
PRO side carrier and adapter plate for SysBag 15
Attach the shown parts to your PRO side carrier [right PRO side carrier
shown). Tighten the screws as specified in the illustration.
Adapter plate for STREET-RACK and adapter plate for Sys Bag 10 / 15 Attach the
shown parts to your
Adapter plate for STREET-RACK.
ATTENTION: Make sure that the locking mechanism of the adapter plate for
SysBag and the lock bolt (2) are mounted opposite to each other! Tighten the
screws as specified in the illustration.
STEEL-RACK and adapter plate for SysBag 15 Attach the shown parts to your
STEEL-RACK.
ATTENTION: Use liquid thread locker (screws (6) only)! Tighten the
screws as specified in the illustration.
ADVENTURE RACK and adapter plate for SysBag 15 Attach the shown parts to your
ADVENTURE RACK.
ATTENTION: Use liquid thread locker (screws (6) only)! Tighten the screws
as specified in the illustration.
EVO side carrier and adapter plate for SysBag 30
Attach the shown parts to your EVO side carrier [right EVO side carrier
shown).
Tighten the screws as specified in the illustration.
PRO side carrier and adapter plate for SysBag 30
Attach the shown parts to your PRO side carrier (right PRO side carrier shown
I.
Tighten the screws as specified in the illustration.
STEEL-RACK and adapter plate for SysBag 30 Attach the shown parts to your
STEEL-RACK.
ATTENTION: Make sure that the locking mechanism of the adapterplate for
SysBag and the lock bolt (2) are mounted opposite to each other!
ATTENTION: Use liquid thread locker!
Tighten the screws as specified in the illustration.
ADVENTURE RACK and adapter plate for SysBag 30Attach the shown parts to your
ADVENTURE RACK.
ATTENTION: Make sure that the locking mechanism of the adapter plate for
SysBag and the lock bolt(2) are mounted opposite to each other!
ATTENTION: Use liquid thread locker!
Tighten the screws as specified in the illustration.
Adapter plate for ALU-RACK and adapter plate for SysBag 30 Attach the shown
parts to your Adapter plate for ALU-RACK.
ATTENTION: Make sure that the locking mechanism of the adapter plate for
SysBag and the lock bolt (2) are mounted opposite to each other!
Tighten the screws as specified in the illustration.
Adapter plate for STREET-RACK and adapter plate for SysBag 30 Attach the shown
parts to your Adapter plate for STREET-RACK.
ATTENTION: Make sure that the locking mechanism of the adapter plate for
SysBag and the lock bolt (2) are mounted opposite to each other!
Tighten the screws as specified in the illustration.
Revision: 01 . Datum / Date: 10 – 2018
Adapter plate for SysBag 30
Thank you for choosing this premium product from SW-MOTECH. Please visit our
webshop for additional information, such as application charts and PDF
mounting instructions. Any other documents that may be required (e.g. ABE
certifications), are also available for download at our webshop. Installation
and/or maintenance of this product require good technical understanding! For
your own safety SW-MOTECH recommends having installation and/or servicing
carried out by a specialist workshop!
SW-MOTECH assumes no liability for damage caused by improper installation
and/or maintenance work!
Carefully follow all the directions given in the mounting instructions and pay
attention to all relevant information in the vehicle manual during assembly.
Nonconformance can lead to vehicle damage or even endanger the driver!
These mounting instructions are written based on our current state of
knowledge. Legal requirements for accuracy do not exist.
This product was developed for vehicles in their factory setting.
Compatibility with original accessory parts or other manufacturers’ accessory
parts is not guaranteed. Furthermore, BEFORE installing this product, make
sure that all moving parts (e.g. the chain) are in the original state of
maintenance. Installed accessories can change the driving behaviour and/or
stability of your vehicle.
GENERAL INFORMATION
Observe the country-specific regulations concerning vehicle registration/
operation as well as TUV regulations if applicable. If required, register
installed parts in the vehicle documents through an appropriate inspection
authority.
PREPARATION: Read the mounting instructions carefully and make sure that
all items of the parts list are included. Make sure that your vehicle is
parked safely and cannot fall over. Turn off the engine and remove the
ignition key. Let the motor/exhaust cool off if necessary. Disconnect the
vehicle battery when working on the electrical system. Use appropriate tools.
Have another person to help you.
MOUNTING: All parts and connections removed from the vehicle must be
reinstalled in accordance with the vehicle manufacturers· specifications
orreplaced by parts delivered by SW-MOTECH. Secure all threads, unless
otherwise specified, with medium-strength liquid thread locker. Torque
specifications undefined by SW-MOTECH must be obtained from the vehicle
manufacturer or by a specialist workshop!
FUNCTION CHECK: After installation make sure that all parts and
connections previously removed are properly replaced. Also make sure that no
moving parts are obstructed and no function of the vehicle is hindered in any
way. Cables and hoses must not rub and/or be pinched. Before starting to ride,
perform a comprehensive check of all functions. After the first 50 km and then
at regular intervals, check the tightening torque of all screw connections and
the proper fit of the product.
PARTS LIST
- Al!measurements in millimeters.
** The second number indicates the total quantity of the part in the delivery.
*** No torque specifications: Use the torque defined by vehicle manufacturer! The standard torque in this table can be used as long as it is within the vehicle manufacturer s specifications.
Configuration A for:
EVO side carrier
PRO side carrier
NOTE: The mounting steps [1] to [3] show the mounting of the right
adapter plate. Mount the left adapter plate in the same way as on the
rightside. Mount the shown parts on the other side of the adapter plate.
ATTENTION: Pay attention to the markings (parallelogram or triangle)
which define the respective mounting side (seedetail drawing on the top right
side)! Attach the parts (2) to [5) to the adapter plate [11. as shown in the
drawing. Tighten the screws as specified in the parts list.
Configuration B for:
Adapter plate for ALU-RACK
Adapter plate for STREET-RACK
STEEL-RACK
ADVENTURE-RACK
ATTENTION: Make sure that the locking mechanism (2) and the lock bolt of
the adapter kit for SysBag 15/30 are mounted opposite to each other! Attach
the parts (2) to [5) to the adapter plate [11, as shown in the drawing.
Tighten the screws as specified in the parts list.
Attach the adapter plate [1) to your SysBag 30, as shown in the drawing.
Pay attention to the alignment of the lid of the SysBag 30.
ATTENTION: Use medium-strength liquid thread locker!
Tighten the screws as specified in the parts list.
Place the locking openings of the locking mechanism [2) and the locking
adapter [3) onto the guide bolts of the adapter kit for SysBag 15/30 [sold
separately). Then press the SysBag 30 onto the guide bolts, until it properly
rests on your
SW-MOTECH carrier system.
ATTENTION: Make sure that all guide bolts of the adapter kit for SysBag
15/30 engage at the same time! Pay attention to the clearly audible snap sound
of the locking mechanism and that the red marking under the slider is not
visible!
To release press the slider downward or pull the release cord.
Revision: 03 . Datum /Date: 11- 2018
SysBag 10 / 15 / 30
Thank you for choosing this premium product from SW-MOTECH. Please visit our
webshop for additional information, such as application charts and PDF
mounting instructions. Any other documents that may be required (e.g. ABE
certifications), are also available for download at our webshop. Installation
and/or maintenance of this product require good technical understanding! For
your own safety SW-MOTECH recommends having installation and/or servicing
carried out by a specialist workshop!
SW-MOTECH assumes no liability for damage caused by improper installation
and/or maintenance work!
Carefully follow all the directions given in the mounting instructions and pay
attention to all relevant information in the vehicle manual during assembly.
Nonconformance can lead to vehicle damage or even endanger the driver! These
mounting instructions are written based on our current state of knowledge.
Legal requirements for accuracy do not exist. This product was developed for
vehicles in their factory setting. Compatibility with original accessory parts
or other manufacturers’ accessory parts is not guaranteed. Furthermore,
BEFORE installing this product, make sure that all moving parts (e.g. the
chain) are in the original state of maintenance. Installed accessories can
change the driving behaviour and/or stability of your vehicle.
GENERAL INFORMATION
Observe the country-specific regulations concerning vehicle registration/
operation as well as TUV regulations if applicable. If required, register
installed parts in the vehicle documents through an appropriate inspection
authority. PREPARATION: Read the mounting instructions carefully and make sure
that all items of the parts list are included. Make sure that your vehicle is
parked safely and cannot fall over. Turn off the engine and remove the
ignition key. Let the motor/exhaust cool off if necessary. Disconnect the
vehicle battery when working on the electrical system. Use appropriate tools.
Have another person to help you.
FUNCTION CHECK: This is a universal product. For this reason make sure
BEFORE the first use, that the product can be fixed properly and used without
problems with your vehicle type. After fixation also make sure that no moving
parts are obstructed and the function of the vehicle is not hindered in any
way. Lamps as taillight and turn signals must not be limited in their
function. Cables and hoses must not rub and/or be pinched. Before starting to
ride, perform a comprehensive check of all functions.
PRODUCT SPECIFIC INFORMATION
ATTENTION: Riding with this product may affect the motorcycles driving
and braking performance!
ATTENTION: Depending on the location of fixation, cornering and ground
clearance can be reduced by using this product!
ATTENTION: Before riding and at each stop (every 200 km) check proper
fixation of the product!
| Maximum Load | Maximum Speed |
|---|---|
| 5KG muse sras 1s | 130 km/him |
10KG taus»ersrsas
ATTENTION: The maximum vehicle load specified by the manufacturer and the
maximum load of the SW-MOTECH carrier/rack must not be exceeded!
NOT FOR OFFROAD-USE
PARTS LIST
Al!measurements in millimeters.
The second number indicates the total quantity of the part in the delivery.
No torque specifications: Use the torque defined by vehicle manufacturer! The
standard torque in this table can be used as long as it is within the vehicle
manufacturer s specifications.
FASTENING TO THE VEHICLE
ATTENTION: Before fastening your SysBag [1 I to the vehicle, the rear
eyelets must be closed with the included rubber plugs [4) [shown in the detail
drawing at the top)!
ATTENTION: Protect sensitive surfaces in the area of the SysBag [1) and
the fastening straps with the adhesive protection foil (5) from scratches!
Place your SysBag [1] in the rear area of your vehicle [e.g. passenger seat,
luggage rack etc.I.
On both sides entangle TWO loop straps [6) to appropriate and reliable
attachment points in the rear area of the vehicle [e.g. luggage hook etc.I.
TIP: SW-MOTECH recommends the mounting with the lashing eyes [2l!only Sys Bag
10 and 15). Attach the lashing eyes [21 with the original screws behind your
license plate. Then entangle on both sides TWO loop straps [6) to appropriate
and reliable attachment points of thevehicle le.g. vehicles frame, footrest
mounts etc.I. Attach the hook buckles of the loop straps [6) on both sides to
themarked loops of the SysBag (1l, as shown in the lower drawing. Tighten all
loop straps until the SysBag (1) is centered and securely fastened to the
vehicle. Secure the overlength of the loop straps [6] with the rubber loops.
FASTENING
FASTENING TO THE SYSBAG 15 (Optional)
Attach your SysBag 15 [Al to the vehicle as described in step [1].Loosen the
upper two straps of the vehicle-mounted SysBag 15 [Al. Attach the hook buckles
of the two
straps to the shown loops [behind the lid[ of the Sys Bag 10 or 15 [Bl. On
both sides, loosen the upper straps on each side of the SysBag 10/15 [Bl.
Attach the hook buckles of the two straps to the loops shown on the attached
SysBag 15 [Al. After ALL FOUR hook buckles are properly hooked, tighten the
straps until the SysBag 10/15 [Bl is firmly attached on the SysBag 15 [Al.
Secure the overlength of the straps [41 with the velcro loops against
flapping.
FUNCTION CHECK
(MUST BE OBSERVED)
ATTENTION: All components of the SysBag must not contact any hot or
moving parts of the vehicle. All parts should also remain 15 cm away from hot
parts of the vehicle and remain clear of the exhaust stream. For this reason
compress the suspension fully several times with your vehicle stationary.
LOADING and CARE
ATTENTION: Always use the included waterproof innerbag (3) to protect
your luggage from moisture!
Fasten the waterproof inner bag [3] on the inside of the reinforced opening of
the SysBag [1 I.
Now roll the reinforced opening three times. Then close the SysBag I 1] with
the buckles.
LOADING
ATTENTION: Pay attention to keep items and electronic devices that can be
damaged by magnetic fields away from the magnets sewn in the lid of the SysBag
(1)!
ATTENTION: Never store pointy or sharp-edged objects, which could cause
injury to persons or damage to the vehicle/side case!
CARE
For cleaning use ONLY a soft textile brush, cloth or sponge and warm soapy
water! Rinse with clean water.
Do NOT use strong cleaning agents, rough cleaning tools or high pressure
washer I Clean the SysBag after riding in salty conditions, to avoid damage
from salt.
COMBINATIONS
COMBINATIONS
The SysBag line has only three bags but offers over 20 mounting options and
combination possibilities. The bags can be lashed to the tail end or at the
side, as described in the mounting instructions, or mounted to the carrier /
rack with a quick-release fastener. On this page you will find some mounting
examples. Vehicle-specific solutions, SysBag sets and adapter plates for SW-
MOTECH carriers/ racks can be found in our webshop.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>