ORNO OR-WL-3201-100-TS Bathroom Fan Instruction Manual
- June 12, 2024
- ORNO
Table of Contents
ORNO OR-WL-3201-100-TS Bathroom Fan
IMPORTANT!
Before using the device, read this Service Manual and keep it for future use. Any repair or modification carried out by yourselves results in loss of guarantee. The manufacturer is not responsible for any damage that can result from improper device installation or operation. In view of the fact that the technical data are subject to continuous modifications, the manufacturer reserves a right to make changes to the product characteristics and to introduce different constructional solutions without deterioration of the product parameters or functional quality. Additional information and technical support related to the product is available at: www.support.orno.pl. Orno Group Sp. z o.o. holds no responsibility for the results of non- compliance with the provisions of the present Manual. Orno Group Sp. z o.o. reserves the right to make changes to the Manual – the latest version of the Manual can be downloaded from www.support.orno.pl. Any translation/interpretation rights and copyright in relation to this Manual are reserved.
- The product is intended for indoor installation.
- Perform all operations with the power disconnected.
- Do not immerse the device in water or other liquids.
- Do not cover the device during operation.
- Do not open the device and do not make any repairs yourself.
- Do not use the device contrary to its intended use.
- The electrical installation requires a switch with a minimum 3mm distance between the contacts of all poles.
- Avoid the invers flow of ases into the room from an open chimney hole or other devices with the open fire.
Each household is a user of electrical and electronic equipment, and hence a potential producer of hazardous waste for humans and the environment, due to the presence of hazardous substances, mixtures and components in the equipment. On the other hand, used equipment is valuable material from which we ca n recover raw materials such as copper, tin, glass, iron and others. The weee sign placed on the equipment, packaging or documents attached to it indicates the need for selective collection of waste e /ectrica/ and electronic equipment. Products so marked, under penalty of fine, cannot be thrown into ordinary garbage along with other waste. The marking means at the same time that the equipment was placed on the market after August 13, 2005. It is the responsibility of the user to hand the used equipment to a designated collection paint for proper processing. Used equipment can also be handed over to the seller, if one buys a new product in an amount not greater than the new purchased equipment of the same type. Information on the available collection system of waste electrical equipment can be found in the information desk of the store and in the municipal office or district office. Proper handling of used equipment prevents negative consequences for the environment and human health!
INSTALLATION
Fan installation
- It is possible to set the fan operation parameters on the potentiometer with a screwdriver in fans with electrical control system (models: OR-WL-3200/TS, OR-WL-3200/HS).
- Timer sensor (the fan operates from 3 to 23 minutes +/-10% after switching off the light)
- Humidity sensor (the fan dries the room depending on chosen humidity level from 40 to 80%)
WIRING SCHEME
OR-WL-3201/TS, OR-WL-3201/HS
- L- Phase wire
- N Neutral wire
- T Control wire
- M Motor
Grill assembly
TECHNICAL DATA
DESCRIPTION
Useful bathroom fan that automatically draws the moist air to the outside. It is designed for surface mounting on a wall, and thanks to the use of ball bearings, it is also suitable for mounting in the ceiling. A very quiet device that will take care of the air quality in the bathroom, but will not disturb our relaxation zone. The fan has a compact design and a
The fan should be cleaned regularly and disassembled at least once a year for inspection of the motor and cleaning of the fan from deposits. The inspection includes cleaning, external visual inspection of the motor, starting and safety equipment. short exhaust pipe which will fit even in shallow ventilation ducts. A special decorative panel can be selected for the fan, which is available in many colors (not included). Thanks to this solution, the device looks good not only in the bathroom, but also in other rooms. The materials used guarantee high durability of the device.
- Make sure the unit is disconnected from the power source before cleaning.
- Plastic parts should be cleaned with a damp cloth or sponge with soap.
- After cleaning, ensure that any soap residue has been removed and that no liquids have entered the motor.
- Ensure that all components are dry before the fan is reassembled.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>