RADEMACHER SLDSM 50-12PZ RolloTube S-Line SunDouFern Tubular Motors Instruction Manual

RolloTube S-line SunDuoFern Tubular Motors

SLDSM 50-12PZ RolloTube S-Line SunDouFern Tubular Motors

Brief instructions for installation and intitial commissioning
RolloTube S-line Sun DuoFern Small (SLDSS) / RolloTube S-line Sun DuoFern Medium (SLDSM)
Item numbers : 2350 06 76 / 2350 10 76 / 2378 10 76 / 2378 20 76 / 2378 30 76 / 2378 40 76 / 2378 50 76

DANGER!
Risk of fatal electric shock when touching electrical components.

• The electrical connection of the tubular motor and all work on the electrical systems may only be undertaken by an authorised qualified electrician.
• Carry out all installation and connection work only in an isolated, de-energised state.
• Disconnect all phases of the mains power lead and secure it to prevent any reconnection.
• Check that the system is de-energised.

DANGER!
**** There is also a risk of fatal injury from crush-ing resulting from uncontrolled starting of the drive.

• Never attempt to manually stop the motor/awning in the event of uncontrolled movement.
  Before you begin, please read this detailed operating manual of the RolloTube S-line Sun DuoFern through completely and follow all the safety instructions and installation instructions.

Preparation

Requirements for the correct execution of the following functions:
Self-learning operation:

• The awning requires a fixed end stop when closed in order to be able to learn the end point.
• The extended end point must first be learned or set.
• The driver adapter must be mounted with a freewheel mechanism.

Blockage detection:

• The awning must move easily and freely.

Fabric relief:

• This function is only active if the upper end point is set to automatic/ self-learning.

Obstacle detection:

• The driver adapter must be mounted with a freewheel mechanism.

Fabric tensioning:

• The fabric tensioning function is always active after the first run cycles, after both the self-taught and manual end point setting.

Electrical connection

Logging on

Briefly press the set button on the drive head until the tubular motor starts up briefly. You now have 120 seconds time to activate the log-on mode of a DuoFern device. Please read the operating manual for the DuoFern device.

Self-learning commissioning

The RolloTube S-line sun DuoFern tubular motors are self-learning motors at both end positions. This eliminates the need to set the end points or a teach- in run.

1. Switch on the mains power supply. The RolloTube S-line Sun DuoFern is ready for operation immediately.
2. First extend and then retract the awning. The end positions are automatically learned during the first drive cycles.
3. Subsequently check the direction of travel of the roller shutter, if the RolloTube S-line Sun DuoFern is being operated using a switch or button. Switch the lines for the rotation direction if the direction of travel is wrong.

or setting end points manually

Initial installation
At the initial installation, the roller shutter engineer can carry out the end point setting with the help of the set button on the motor or with a commercially available universal setting cable, see operating manual of the RolloTube S-line Sun DuoFern.

Universal setting cable

Pin assignment:
The universal setting cable is connec-ted with the same colours as the motor connecting cable of the RolloTube S-line Sun DuoFern, see above.
Button assignment:
Button 1 = direction of travel (I / II)
Button 2 = set button (III)
Button 3 = continuous phase
(ON/SET)

service.en@rademacher.de
Tel.: +49 2872 933 175 RADEMACHER
Geräte-Elektronik GmbH
Buschkamp 7
46414 Rhede (Germany)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>